sales@tender18.in| +917069661818
Register Now Free Trail
Register Now Free Trail
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source
Tender Type

265Latest Valve positioner Tenders List

Latest Valve positioner Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Valve positioner tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Valve positioner tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Valve positioner Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Valve positioner tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Valve positioner Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Valve positioner Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Valve positioner Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Valve positioner tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Valve positioner Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Valve positioner sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Valve positioner tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Valve positioner tenders.

Is EMD mandatory for all Valve positioner tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Valve positioner work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Valve positioner tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Valve positioner Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16445998
Location : ernakulam , kerala
Source : GEM Tenders
NEW TENDER
tender for 26kkoc003 200 items ek3010b 0643601000 , ek3010b 1002207000 , ek3010b 1002505000 , ek3010b 10122050 , ek3010b 12005040 , ek3010b 26442801400 , ek3010b 2700557000 , ek3010b 2702322000 , ek3010b 2709943000 , ek3010b 2866326000 , ek3010b 2866325000 , ek3010b 3006710000 , ek3010b 3013830000 , ek3010b 3802211000 , ek3010b 5000310030 , ek3010b 5000606000 , ek3010b 5050285000 , ek3010b 5050403000 , ek3010b 5050807000 , ek3010b 5050810000 , ek3010b 5050814000 , ek3010b 5050851000 , ek3010b 7007587000 , ek3010b 7246450000 , ek3010b 7246550000 , ek3010b 7215201000 , ek3010b 7215213000 , ek3010b 7236130000 , ek3010b 7229535000 , ek3010b 7260005000 , ek3010b 7260018000 , ek3010b 7405007000 , ek3010b 7406509000 , ek3010b 7407706000 , ek3010b 7414406000 , ek3010b 7425412000 , ek3010b 7426023000 , ek3010b 7426506000 , ek3010b 7426505000 , ek3010b 7426619000 , ek3010b 7426616000 , ek3010b 7427117000 , ek3010b 7427124000 , ek3010b 7427251000 , ek3010b 7430304000 , ek3010b 7435221000 , ek3010b 7437976000 , ek3010b 7437849000 , ek3010b 7438133000 , ek3010b 7438136000 , ek3010b 7438170000 , ek3010b 7438164000 , ek3010b 7438182000 , ek3010b 7438511000 , ek3010b 7438678000 , ek3010b 7439817000 , ek3010b 7440501000 , ek3010b 7442102000 , ek3010b 7442378000 , ek3010b 7442377000 , ek3010b 7442376000 , ek3010b 7442345000 , ek3010b 7442375000 , ek3010b 7445816000 , ek3010b 7446602000 , ek3010b 7448350000 , ek3010b 7448804000 , ek3010b 7448450000 , ek3010b 7459137000 , ek3010b 7462669000 , ek3010b 7506890000 , ek3010b 7529536000 , ek3010b 7534508000 , ek3010b 7535201000 , ek3010b 7604618000 , ek3010b 7903480000 , ek3010b 79034800 , ek3010b 7903477000 , ek3010b 79036260 , ek3010b 7904006000 , ek3010b 7904121000 , ek3010b 7904115000 , ek3010b 79042220 , ek3010b 7904420000 , ek3010b 7904409000 , ek3010b 7904608000 , ek3010b 7904611000 , ek3010b 7904609000 , ek3010b 7904622000 , ek3010b 7904810000 , ek3010b 7906820000 , ek3010b 7907801000 , ek3010b 7907802000 , ek3010b 7907702000 , ek3010b 79077020 , ek3010b 7907807000 , ek3010b 7907806000 , ek3010b 7907925000 , ek3010b 7908705000 , ek3010b 7908820000 , ek3010b 7908706000 , ek3010b 79095020 , ek3010b 7909308000 , ek3010b 7909404000 , ek3010b 7910101000 , ek3010b 7910303000 , ek3010b 7911905000 , ek3010b 7914804000 , ek3010b 7916111000 , ek3010b 7916152000 , ek3010b 7935159000 , ek3010b 7942150000 , ek3010b 7942178000 , ek3010b 7952310000 , ek3010b 7951720000 , ek3010b 7966512000 , ek3010b 8102515000 , ek3010b 8107803000 , ek3010b 8130203000 , ek3010b 8130208000 , ek3010b 8130232000 , ek3010b 8130238000 , ek3010b 8171113000 , ek3010b 8171123000 , ek3010b ex 084 00 1 03 , ek3010b ex03100103 , ek3010b ex04500103 , ek3010b ex06000101 , es6031d 2703912000 , es6031d 5050881000 , es6031d 675360 pt407 , es6031d 7215213000 , es6031d 7232813000 , es6031d 7249457000 , es6031d 7430683000 , es6031d 7432635000 , es6031d 7432641000 , es6031d 7436801000 , es6031d 7437627000 , es6031d 7438667000 , es6031d 7447269000 , es6031d 7448713000 , es6031d 7534811000 , es6031d 7602723000 , es6031d 7602729000 , es6031d 7602807000 , es6031d 7602913000 , es6031d 7605679000 , es6031d 7604699000 , es6031d 7605678000 , es6031d 7605903000 , es6031d 7605904000 , es6031d 7607275000 , es6031d 7607603000 , es6031d 7690123000 , es6031d 7690134000 , es6031d 7690174000 , es6031d 7690192000 , es6031d 7690409000 , es6031d 7690408000 , es6031d 7690431000 , es6031d 7690426000 , es6031d 7690725000 , es6031d 7690913000 , es6031d 7690912000 , es6031d 7690909000 , es6031d 7690921000 , es6031d 7690918000 , es6031d 7900132000 , es6031d 7901215000 , es6031d 7902802000 , es6031d 7902801000 , es6031d 7902932000 , es6031d 79041190 7904119000 , es6031d 7904314000 , es6031d 7906819000 , es6031d 7906841000 , es6031d 7907707000 , es6031d 7914509000 , es6031d 7942150000 , es6031d 8102404000 , es6031d 8130239000 , es6031d 8169901000 , es6031d 8171011000 , es6031d 8171121000 , es6031d ex01100103 , es6031d ex02300103 , es6031d ex11700102 , es6031d ex12400102 , es6031d ex13300102 , es6031d pia603 , ek3010b 5050158000 , ek3010b 5050612000 , ek3010b 7650317000 , ek3010b, 26kkoc003 200 items, spin on filter for lubricating, spring decompression shaft, joint, v belt a 33, ring rubber top for push road tube, expansion bellow, oks 200 molykote, valve guide, valve exhaust, gfl nut, set bolt m27 item no 203, valve relief assy, thermometer with casing, water temp guage 3 6 cap 40 to 100 degree cls., screw set, nut for speed set screw, circlip 85 x 3, banjo bolt m12x1 5, washer copper, washer copper 16x22, inlet valve, exhaust manifold assembly bank, exhaust manifold assembly bank b, glacier filter gf 600 11, gasket for glacier filter gf600 11, ltwater system components, disc spring, spring pack 90 20 16 u, dowel dia 36 mm, ball bearing skf 6209, oil pump brg shell, joint cordon d7 21a7x110 cms, flexmast coupl pipe 88 9mm o d 096500v3 650, roller bearing skfnj 213, o ring, joint dia 184x240xep 2, o ring viton an65 60 c7, o ring ms29513 245 60c7 viton, bearing roller, flexmast conn gm10006 038 38 od pipe, level switch, couping flex mast 10011 4, gasket, flexmaster connection, flex hose dn20 l 1 m, flex hose dn 6 l 1 m, sleeve dn 100 pn 16, sleeve dn 65 pn 16, rubber compensative sleeve dn150 pn16, element for lo thermostat 63 71 deg c, set of gaskets for lub oil filter, shim injection, exp bellow, joint for balmo fuel feed pump, glanding, speed sensor 19050, back geared motor 415v 50hz, sealing cord, injection pump assly dia23 grad, injector assembly, starting air inlet connection, guide bush, cyclam seal assy, spacer, addesive super cyano 495, temperature sensor brg temp sensor, hydraulic motor for fuel filter, screw, nitrile cord, ring, o ring injector, connection, safty valve on cyl head, needle, barrel cap, thrust dv stopper bar, valve feed, serrated pin, oil seal 25x42x8, exhaust manifold lag, inlet manifold seal, joint flexible, bellow expansion 74507010, square joint, bs ring bsb d12 nse6 51 20a8, spring collar bar, sheathed injection pipe, o ring an 21 60c7 nse 6 5, sealing joint, safty valve deviation on fuel, oring an21 nse6 5 60c7, o ring for glacier filter, nut for shaft, strap for piston, spanner for connecting rod bolts, piston ring p3712, magnetic pickup sensor 19050, connection piece to turbocharger, flexible hose for sea water emd, flexible hose for ht water, flexible hose for balance water return, flexible hose for fuel leaks, safety stop electro distributor, stop memory, distributor iso 541 pneumatic spring, power switch, signal isolator 4 20ma 4 20ma 420ma loop powered, spool valve air operated 1 pilots location 16 18, set of gasket for hyd motor and diversion sect, copper washer 33x39, delivery pressure transmitter 0 6 bar, ball bearing for hyd motor, o ring idp 130 x 3up, bush dia 22 26 x 14, injector body, non return valve dn150 pn16 rk 86a, ball bearing for lube oil filter, flat gasket pn 40 dn65 t 1 5, single male union, o rind ms 29513 238 v 75 e, inlet valve guide, spring collar, exhaust valve, filter for pressure reducer of omd, set of gasket for hyd motor, scavenging air filter for omd, exhaust temperature sensor, sensor for exh temp tc, limit switch for gachot valve, joint type c with limiter, socket for relay, selector switch 3 positions withdra wal from centre 2no, rtd input field module type 170aai52040 slave 170fnti11001, distributor iso electro pneumatic spring, distributor iso electro pneumatic electric, air filter, solenoid valve safety stop, motor protection relay, frequency preamplifier t c speed, frequency preamplifier engine speed, rgm group safety card, temperature regulator fresh water, human machine interface, loctite 270, cam shaft nut, tappet for valve gear, guide piece f valve gear, cylinder head gasket, bush joint bush viton, o ring ann74 nse 6 5 60c7, cyclam seal, lipped seal, o ring for glacier filter gf600 11, hand held programmer unit with cable, flexible hose for fuel return, pressure guage range 0 6bar 4 dial type, thermostatic valve element 21 2 bocb15501 00 a, normal stop electro distributor, pressure transmitter 10 bar 24vdc o p 4 20 ma, pressure transmitter 6 bar 24vdc o p 4 20 ma, rtd converter, frequency divider turbo speed, engine controller, pressure switch 2 5 28 bar, circlip external, washer plain, channel plate gasket, engine inlet thermostic valve, gasket cylinder head, coupling holder, o ring no18 nse6 5 60c7, tool for cealing automizers holes
Agency / Dept :
indian navy
Due Date :
Aug 14, 2026 (17 days left)
Tender Value :
0
View Documents
T18 Ref No : 16446187
Location : sonitpur , assam
Source : GEM Tenders
NEW TENDER
tender for ace backhoe loader model ax 130t 200395101472,oil filler cap , 200395101475,gasket cover to cylinder head , 200395101476,bolt hex fl m8x1.25x105x8.8 , 200395101477,coller hex head bolt , 200395101478,turbocharger 4 cylinder tier 4 , 200395101479,nut cleveloc exhaust manifold , 200395101480,stud both ends m8x1.25x34x6 , 200395101482,gasket lub oil outlet tc , 200395101485,bolt banjo m10x1.0x19.4mm , 200395101486,washer seal cu , 200395101488,sealing washer 12x16 is3175 , 200395101491,gasket intake manifold , 200395101493,gasket pipe intake manifold , 200395101494,boost pressure sensor , 200395101501,washer seal cu m22x26.90x1.5 , 200395101504,o ring intake throttle , 200395101509,gasket exhaust flange , 200395101511,nut cleveloc exhaust manifold , 200395101514,gasket exhaust manifold , 200395101515,stud m8 exhaust manifold , 200395101520,gasket egr pipe , 200395101522,pipe egr water cooler to pump , 200395101527,gasket 63mm mounting hole , 200395101528,pipe egr water cc to cooler , 200395101529,pipe cooling egr valve , 200395101530,hose pipe for egr valve , 200395101532,gasket-dcm egrv cpcb ii , 200395101538,plug expansion 30 x 2.0 x 42 , 200395101539,plug expansion 25 x 2.0 x 34 , 200395101540,guide valve , 200395101541,valve stem seal , 200395101542,ring valve seat exhaust , 200395101543,ring valve seat intake , 200395101545,washer clamp nozzle holder , 200395101546,clamp nozzle holder , 200395101548,dummy glow plug , 200395101549,plug hex. m10 x 1.0 , 200395101552,cyl head mounting bolt m14 , 200395101555,gasket cylinder head , 200395101557,tappet , 200395101558,push rod valve , 200395101561,ring seeger , 200395101562,washer valve lever shaft , 200395101566,bush for rocker arm , 200395101570,bush for rocker arm , 200395101578,valve exhaust , 200395101579,valve intake , 200395101580,camshaft thrust plate , 200395101582,key woodruff , 200395101585,washer main drive pulley , 200395101587,grease seal for front cover , 200395101588,plug m14 x 1.5 hax socket pipe , 200395101591,o ring for oil filler cap , 200395101593,o ring 28.25x2.62 nbr , 200395101594,bearing ball 35x62x14 , 200395101595,spacer hydraulic pump brg , 200395101596,bearing ball 35x72x17 , 200395101597,circlip internal 72 mm , 200395101598,oil seal front , 200395101603,bush for idler gear , 200395101609,gasket cover injection , 200395101611,washer , 200395101615,oil filler cap assy , 200395101616,o ring wire dia 3 id60.5 , 200395101617,seal oil filler cap , 200395101618,hose water inlet , 200395101619,clamp spring band 24x12x1.3 , 200395101624,gasket oil fill tube , 200395101628,phase sensor , 200395101637,bush campshaft front , 200395101638,bush camshaft rear , 200395101640,pin dowel 8.0m 6 x 12 , 200395101641,pin sealing for fuel timing , 200395101647,piston cooling jet assembly , 200395101649,gasket for piston cooling jet , 200395101651,sealing for pipe union , 200395101655,gasket water drain plug , 200395101659,dipstick 72hp bhl bs4 , 200395101660,dipstick guide tube , 200395101661,gasket hyd pump , 200395101666,ring set piston consist of , 200395101670,piston with pin consist of , 200395101676,bush connecting rod , 200395101677,bolt connecting rod , 200395101679,bearing shell connecting rod , 200395101680,bearing main journal top , 200395101681,bearing main journal bottom , 200395101682,thrust washer with lug , 200395101683,thrust washer without lug , 200395101687,cylinder liner with grading , 200395101688,o ring cylinder liner , 200395101690,oil pump assembly , 200395101692,gasket for oil cooler pipe , 200395101698,lube oil filter assembly , 200395101699,oil cooler 5 plate , 200395101705,gasket oil filter bracket ci , 200395101707,gasket for , 200395101710,hose for oil cooler inlet and , 200395101713,clamp spring band 22x12x1.3 , 200395101715,fan belt av13 1195 mm , 200395101717,water pump assembly , 200395101727,hose bypass for water pump , 200395101729,gasket thermostat housing , 200395101730,sensor coolant , 200395101731,washer insert temperature , 200395101733,thermostat assembly , 200395101734,gasket thermostat , 200395101741,ring gear , 200395101749,oil seal crankshaft rear , 200395101756,pipe overflow rail, 200395101472,oil filler cap, 200395101475,gasket cover to cylinder head, 200395101476,bolt hex fl m8x1.25x105x8.8, 200395101477,coller hex head bolt, 200395101478,turbocharger 4 cylinder tier 4, 200395101479,nut cleveloc exhaust manifold, 200395101480,stud both ends m8x1.25x34x6, 200395101482,gasket lub oil outlet tc, 200395101485,bolt banjo m10x1.0x19.4mm, 200395101486,washer seal cu, 200395101488,sealing washer 12x16 is3175, 200395101491,gasket intake manifold, 200395101493,gasket pipe intake manifold, 200395101494,boost pressure sensor, 200395101501,washer seal cu m22x26.90x1.5, 200395101504,o ring intake throttle, 200395101509,gasket exhaust flange, 200395101511,nut cleveloc exhaust manifold, 200395101514,gasket exhaust manifold, 200395101515,stud m8 exhaust manifold, 200395101520,gasket egr pipe, 200395101522,pipe egr water cooler to pump, 200395101527,gasket 63mm mounting hole, 200395101528,pipe egr water cc to cooler, 200395101529,pipe cooling egr valve, 200395101530,hose pipe for egr valve, 200395101532,gasket-dcm egrv cpcb ii, 200395101538,plug expansion 30 x 2.0 x 42, 200395101539,plug expansion 25 x 2.0 x 34, 200395101540,guide valve, 200395101541,valve stem seal, 200395101542,ring valve seat exhaust, 200395101543,ring valve seat intake, 200395101545,washer clamp nozzle holder, 200395101546,clamp nozzle holder, 200395101548,dummy glow plug, 200395101549,plug hex. m10 x 1.0, 200395101552,cyl head mounting bolt m14, 200395101555,gasket cylinder head, 200395101557,tappet, 200395101558,push rod valve, 200395101561,ring seeger, 200395101562,washer valve lever shaft, 200395101566,bush for rocker arm, 200395101570,bush for rocker arm, 200395101578,valve exhaust, 200395101579,valve intake, 200395101580,camshaft thrust plate, 200395101582,key woodruff, 200395101585,washer main drive pulley, 200395101587,grease seal for front cover, 200395101588,plug m14 x 1.5 hax socket pipe, 200395101591,o ring for oil filler cap, 200395101593,o ring 28.25x2.62 nbr, 200395101594,bearing ball 35x62x14, 200395101595,spacer hydraulic pump brg, 200395101596,bearing ball 35x72x17, 200395101597,circlip internal 72 mm, 200395101598,oil seal front, 200395101603,bush for idler gear, 200395101609,gasket cover injection, 200395101611,washer, 200395101615,oil filler cap assy, 200395101616,o ring wire dia 3 id60.5, 200395101617,seal oil filler cap, 200395101618,hose water inlet, 200395101619,clamp spring band 24x12x1.3, 200395101624,gasket oil fill tube, 200395101628,phase sensor, 200395101637,bush campshaft front, 200395101638,bush camshaft rear, 200395101640,pin dowel 8.0m 6 x 12, 200395101641,pin sealing for fuel timing, 200395101647,piston cooling jet assembly, 200395101649,gasket for piston cooling jet, 200395101651,sealing for pipe union, 200395101655,gasket water drain plug, 200395101659,dipstick 72hp bhl bs4, 200395101660,dipstick guide tube, 200395101661,gasket hyd pump, 200395101666,ring set piston consist of, 200395101670,piston with pin consist of, 200395101676,bush connecting rod, 200395101677,bolt connecting rod, 200395101679,bearing shell connecting rod, 200395101680,bearing main journal top, 200395101681,bearing main journal bottom, 200395101682,thrust washer with lug, 200395101683,thrust washer without lug, 200395101687,cylinder liner with grading, 200395101688,o ring cylinder liner, 200395101690,oil pump assembly, 200395101692,gasket for oil cooler pipe, 200395101698,lube oil filter assembly, 200395101699,oil cooler 5 plate, 200395101705,gasket oil filter bracket ci, 200395101707,gasket for, 200395101710,hose for oil cooler inlet and, 200395101713,clamp spring band 22x12x1.3, 200395101715,fan belt av13 1195 mm, 200395101717,water pump assembly, 200395101727,hose bypass for water pump, 200395101729,gasket thermostat housing, 200395101730,sensor coolant, 200395101731,washer insert temperature, 200395101733,thermostat assembly, 200395101734,gasket thermostat, 200395101741,ring gear, 200395101749,oil seal crankshaft rear, 200395101756,pipe overflow rail to tank trem iv mstar dom, 200395101757,injector overflow pipe, 200395101766,washer for clamp nozzle holder, 200395101770,main fuel filter cartridge f002h22025, 200593424000,pre fuel filter 1.1 ltr 006021640h1, 044502514b,high pressure pump, 044521446b,common rail, 445110894,injector assy, 281002667,camshaft position sensor
Agency / Dept :
border road organisation BRO
Due Date :
Aug 03, 2026 (6 days left)
Tender Value :
0
View Documents
T18 Ref No : 16446188
Location : sonitpur , assam
Source : GEM Tenders
NEW TENDER
tender for eicher spare parts 2 ia208391 , id312383 , ia347507 , ia339570 , id343145 , id305188 , mf445087 , ic334595 , ic334591, ic344591 , ic336553 , ic307442 , ic308918 , ic331571 , mf524002 , ic337847 , if000224 , ib001248 , ib001207 , ia201317 , ic361797 , ic308526 , ic344700 , ic353662 , ic344592 , ia207135 , ic347970 , ic346222 , if300007 , ic300102 , if300011 , ia207018 , ic333037 , if300239 , ic349022 , ic356664 , ic329594 , ic329595 , ic343506 , ic343523 , ic327238,ic332210 , ic327241,ic332643 , ic371405, ci309026 , ia235461 , ic385075 , ia205305 , ic344385 , ic347945 , id335097 , id341090 , ic355088 , id346399 , mb394519 , ia340113 , ia334002 , ia309477 , ib003854 , ip303550 , ia306713 , ia000390 , ia205749 , ia338951 , ia338952 , ie320708 , ie303058 , ie317670 , ib003392 , id205059 , ie302468 , ie319284, ie327829 , ic305934 , ie302810 , ie302811 , ie317595, id203939 , id204176 , ie320496 , id204810 , ie327983 , ie320041 , ie302945 , ie317104 , ie326631 , ie316270 , ie302460 , ie314536 , ie302934 , ic307655 , ib001884 , ie313927 , id207486 , ie310996 , ie310997 , id202292 , mb098249 , ip302373 , ip302372 , ie315996 , ie302487,mb249336 , ia206251 , mb394616 , mb394614 , ia206258 , ia341762 , ia208878 , ip302350 , ia201183 , if000408 , if000384 , ip307241 , id357599 , id338072 , id317158 , id310017 , id323481 , id317165 , id317140, ia208391 ,pad, pedal (hcv), id312383,clutch pedal return spring, ia347507,filter assy, ia339570,drag link assy - hcv, id343145,cushion rubber, frengine mtg, id305188,cushion engine support - rear, mf445087,nut lock m 14x1.5, ic334595,shackle assy front hcv, ic334591, ic344591,bush shackle front susp, ic336553 ,bush spring front susp, ic307442 ,pin-suspension front-hcv, ic308918 ,pin- front bracket front rear suspension, ic331571 ,wear plate assembly, mf524002 ,grease nipple (10) (all spring pin), ic337847 ,grease nipple assy, if000224 ,lock bolt (hcv) (frt & rear), ib001248 ,hexagon nut, ib001207,spring washer (m12), ia201317 ,shock absorber fr assy (hcv), ic361797 ,u bolt m20, ic308526 ,conical washer, ic344700 ,self lock nut m20x1.5, ic353662,shackle assy. rear-hcv, ic344592 ,bush, rear suspension spring-hcv, ia207135 ,rear suspension (hcv) (spring pin), ic347970,wear plate assembly, ic346222 ,flat u-bolt rear, if300007 ,washer u bolt rr (40.40), ic300102 ,nut, u bolt (40.40), if300011 ,lock nut u bolt(40.40, 40.49,terra 25), ia207018,bump stopper front axle (hcv), ic333037,center bolt, if300239,nut lock m14x1.5, ic349022,center bolt m16x2.0, ic356664,nut lock m16x2, ic329594,main leaf (front), ic329595,second leaf (front), ic343506,leaf no 01 (rear), ic343523,leaf no 02 (rear), ic327238, ic332210 ,kit lining standard size rr without spring, ic327241, ic332643,kit lining standard size rr with spring, ic371405, ci309026,auto slack adjuster 140 mm (wabco) (front), ia235461,auto slack adjuster 140 mm offset (rh) mav (rear), ic385075,brake chamber typ24, ia205305 ,drain plug, ic344385,dual brake valve voss type, ic347945,apda (asp cartridge) (with eesport), id335097 ,gasket exhaust, id341090 ,gasket exhaust, ic355088,exhaust brake 100 dia., id346399 ,cushion with sleeve, mb394519,knob inside lock, ia340113, handle assy.reg, ia334002,sunvisor rh, ia309477,regulator f/dr window lh, ib003854,mirror rh cvm, ip303550,rubber pad, ia306713 ,boot, ia000390 ,rubber assy rr mt lower hcv, ia205749 ,rubber assy rear mtg upper (hcv), ia338951 ,integrated foot step cover lh, ia338952,integrated foot step cover rh, ie320708,e694 electric egr engine w/h - cab, ie303058,transmission harness, ie317670,rear chassis harness, ib003392,sub harness, stop lamp switch, id205059,shim speed sensor, ie302468,air filter restriction indicator sensor, ie319284, ie327829,fuel level sensor 220l, ic305934,magnetic switch 24 voss, ie302810 ,tail lamp with integrated registration pl, ie302811 ,tail lamp with integrated registration pl, ie317595, id203939,lamp. lamp licence plate 24v (hcv), id204176,connector battery (24vdc) hcb, ie320496,cut - off sw to starter +ve cable, id204810 ,battery cut off switch (cng), ie327983 ,battery cable, ie320041,front turn indicator lamp, ie302945,switch assy - wiper & exhaust, ie317104,horn 24v, ie326631,reverse buzzer 24v, ie316270,micro relay construction of with resistor 24v, ie302460,flasher cum turn indicator controller, ie314536,mini relay 24v, ie302934,wiper controller 24v, ic307655,button type cable band, ib001884,cable band (200), ie313927,button type cable band, id207486,room lamp 24v (hcv), ie310996,side indicator lamp 24v lh, ie310997,side indicator lamp 24v rh, id202292,wiper blade assy (hcv), mb098249,cover, head (black), ip302373,top markar lamp, ip302372,side markar lamp, ie315996 ,starter relay 24v, ie302487, mb249336,cable tie - harness clips, ia206251,glass front window lh (hcv), mb394616,weather strip door window outer lh, mb394614,weather strip dr. window inr lh, ia206258,weather strip front door lh (hcv), ia341762,biw door side trim seal, ia208878,drip beading (hcv), ip302350,grease nipple, ia201183,wire rope assy, if000408,flange nut, if000384,hexagonal fit bolt m14x1.5, ip307241,cabin control valve (4 position)-ubt, id357599,assy tharmostat, id338072,v belt 8pk 1620, id317158,fuel leak off pipe e694 engine (auto), id310017,washer injector, id323481,injector, id317165,high pressure pump assyye 694 eng, id317140,common rail assy ye 694 eng
Agency / Dept :
border road organisation BRO
Due Date :
Aug 03, 2026 (6 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
NEW TENDER
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026 (2 days left)
Tender Value :
0
View Documents
T18 Ref No : 16453746
Location : perambalur , tamil nadu
NEW TENDER
tender for mechanical prosthetic bileaflet valve for aortic / mitral position. 1.valve should have titanium housing. 2.should have pyrolitic cardbon disc with plyester sewing ring suitable for implantation in aortic / mitral position in humans. 3. the valve should be low profile. 4.the valve should be rotatable within the housing.the leaflet should be well within the housing on the ventricular aspect of the valve so as to prevent accidental chordal entrapment. 5.sizes should be exchangable as and when required irrespective of aortic or mitral position. 6. various valve sizes should be provided with appropriate sizer and should provide valve testers and rotators, srphc82258115-mechanical prosthetic bileaflet valve for aortic / mitral position. 1.valve should have titanium housing. 2.should have pyrolitic cardbon disc with plyester sewing ring suitable for implantation in aortic / mitral position in humans. 3. the valve should be low profile. 4.t he valve should be rotatable within the housing.the leaflet should be well within the housing on th e ventricular aspect of the valve so as to prevent accidental chordal entrapment. 5.sizes should be exchangable as and when required irrespective of aortic or mitral position. 6. various valve sizes sh ould be provided with appropriate sizer and should provide valve testers and rotators.
Agency / Dept :
southern railway SR
Due Date :
Aug 19, 2026 (22 days left)
Tender Value :
0
View Documents
T18 Ref No : 16314032
Location : uttara kannada , karnataka
Source : GEM Tenders
LIVE TENDER
tender for repair, maintenance, and installation of plant/ systems/equipments (version 2) - onboard ins vikramaditya; repair/renewal of valve positioner module of hot water loop; service provider
Agency / Dept :
indian navy
Due Date :
Jul 28, 2026 (Expire Today)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16341367
Location : basti , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for ksb control valve gland packing 1 inch model 374142 , ksb control valve sheet ring top bottom 1 inch model 374142 , ksb control valve seal ring 1 inch model 374142 , ksb control valve spiral gasket top bottom 1 inch model 374142 , ksb control valve plug stem 1 inch model 374142 , ksb control valve cage 1 inch model 374142 , ksb control valve diaphragm 1 inch model 374142 , lp reset solenoid valve 110 volt dc part ba03700050 triveni , cylinder bracket 300 nb iv part 11117 , atlas copco air filter part 1613740800 ga45 ap , atlas copco oil filter part 1625752500 ga45 ap , atlas copco oil separator element part 1622314001 , atlas copco rs ultra compressor oil part 1630204120 , dump solenoid valve 230 volt ac , hmi display panel sr5182995132 , pressure transducer part 1089057578 , temperature sensor part 1089057470 , pump gasket , panel outer prefilter , atlas copco air dryer controller part 1639696033 ga45 , atlas copco auto drain valve , metso neles smart valve positioner nd9000 , capacitive level sensor 300 mm bagasse silo, intrument item 3, ksb control valve gland packing 1 inch model 374142, ksb control valve sheet ring top bottom 1 inch model 374142, ksb control valve seal ring 1 inch model 374142, ksb control valve spiral gasket top bottom 1 inch model 374142, ksb control valve plug stem 1 inch model 374142, ksb control valve cage 1 inch model 374142, ksb control valve diaphragm 1 inch model 374142, lp reset solenoid valve 110 volt dc part ba03700050 triveni, cylinder bracket 300 nb iv part 11117, atlas copco air filter part 1613740800 ga45 ap, atlas copco oil filter part 1625752500 ga45 ap, atlas copco oil separator element part 1622314001, atlas copco rs ultra compressor oil part 1630204120, dump solenoid valve 230 volt ac, hmi display panel sr5182995132, pressure transducer part 1089057578, temperature sensor part 1089057470, pump gasket, panel outer prefilter, atlas copco air dryer controller part 1639696033 ga45, atlas copco auto drain valve, metso neles smart valve positioner nd9000, capacitive level sensor 300 mm bagasse silo
Agency / Dept :
uttar pradesh state sugar corporation limited UPSSCL
Due Date :
Jul 31, 2026 (3 days left)
Tender Value :
0
View Documents
T18 Ref No : 16401345
Location : cheyyar , tamil nadu
LIVE TENDER
corrigendum tender for supply of electro pneumatic positioner with relay for control valves
Agency / Dept :
tamil nadu cooperative sugar federation limited
Due Date :
Jul 30, 2026 (2 days left)
Tender Value :
0
View Documents
T18 Ref No : 16379984
Location : mangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for electronic positioner for butterfly valve
Agency / Dept :
kiocl limited kudremukh iron ore company limited
Due Date :
Aug 03, 2026 (6 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16241442
Location : talcher , odisha
Source : GEM Tenders
LIVE TENDER
tender for pneumatic positioner for control valves as per uploaded annexure-i
Agency / Dept :
directorate of purchase and stores DPS
Due Date :
Aug 05, 2026 (8 days left)
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Valve Positioner. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Valve Positioner sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Valve Positioner Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Valve Positioner, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Valve Positioner Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Valve Positioner Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Valve Positioner.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Valve Positioner depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Valve Positioner Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Valve Positioner bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Valve Positioner. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Valve Positioner, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Valve Positioner, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Valve Positioner?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Valve Positioner tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Valve Positioner?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Valve Positioner, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Valve Positioner is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All