sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

73Latest Rectangular block Tenders List

Latest Rectangular block Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rectangular block tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rectangular block tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rectangular block Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rectangular block tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rectangular block Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rectangular block Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rectangular block Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rectangular block tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rectangular block Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rectangular block sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rectangular block tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rectangular block tenders.

Is EMD mandatory for all Rectangular block tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rectangular block work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rectangular block tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rectangular block Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16464733
Location : ernakulam , kerala
Source : GEM Tenders
NEW TENDER
tender for ek3000b 3963988 , ek3000b 3970409 , ek3000b 3970278 , ek3000b 3970955 , ek3000b 3974703 , ek3000b 4003263 , ek3000b 4019855 , ek3000b 4009319 , ek3000b 4020552 , ek3000b 4020551 , ek3000b 4026171 , ek3000b 4025645 , ek3000b 4058094 , ek3000b 4058176 , ek3000b 4058965 , ek3000b 4069780 , ek3000b 4071615 , ek3000b 4072339 , ek3000b 4073137 , ek3000b 4085796 , ek3000b 4084347 , ek3000b 4089649 , ek3000b 4105447 , ek3000b 4104940 , ek3000b 4105162 , ek3000b 4105567 , ek3000b 4105874 , ek3000b 43463a , ek3000b 43828 a , ek3000b 43828d , ek3000b 43828f , ek3000b 4911880 , ek3000b 4913241 , ek3000b 4912304 , ek3000b 4912718 , ek3000b 4912771 , ek3000b 4920076 , ek3000b 4927085 , ek3000b 4926654 , ek3000b 4932124 , ek3000b 4938263 , ek3000b 4940670 , ek3000b 4963242 , ek3000b 4963208 , ek3000b 5443707 , ek3000b 5292738 , ek3000b 63241f , ek3000b 63747 , ek3000b 64775 , ek3000b 65274 , ek3000b 67185 , ek3000b 68365 , ek3000b 70437 , ek3000b 70458a , ek3000b 9235 1 , ek3000b 70662 , ek3000b ak 4015 ss , ek3000b a026k278 , ek3000b a029g424 , ek3000b ak10050ss , ek3000b ak4012ss , ek3000b ak4012ms , ek3000b ak8013ss , ek3000b am 10120 ss , ek3000b am12028 ss , ek3000b ar11330 , ek3000b ar2307 , ek3000b ar2308 , ek3000b ar3239049 , ek3000b ar324003400 , ek3000b ar388078300k5 , ek3000b ar95416 , ek3000b as5015ss , ek3000b ax1013327 , ek3000b ax1014691 , ek3000b bm31780 , ek3000b bm30265 , ek3000b bm54940 , ek3000b bm62427 , ek3000b bm87993 , ek3000b nt 495mg , ek3000b s 923 e , ek3000b s150 , ek3000b s155 , ek3000b 69203 , ek3000b 3392992 , ek3000b 107063 , ek3000b s274 , ek3000b 3814696 , ek3000b 3907049 , ek3000b 4949819 , ek3000b 504867 , ek3000b kit3238204 , ek3000b 4072342 , ek3000b 140411 , ek3000b 3629140 , ek3000b 4056443 , ek3000b 162426 , ek3000b 3814683 , ek3000b 3907582 , ek3000b 3909356 , ek3000b 4963232 , ek3000b 4055576 , ek3000b 4058969 , ek3000b ak4021ss , ek3000b 3412320, washer sealing 151, hose plain 152, insert valve 153, cap main bearing 154, actuator elc governor 155, hose flexible 156, exchanger heat 157, gasketheat exchanger 158, element air cleaner 159, element air cleaner 160, gasket fuel pump 161, pump fuel tln 162, tube fuel supply 163, hose flexible 164, resistor corrosion 165, tube injector fuel supply 166, tappet valve 167, sensor temperature 168, bearing thrust 169, key offset woodruff 170, gasket exhaust manifold 171, set upper engine gasket 172, pickup magnetic 173, gasket heat exchanger 174, piston ring set 175, isolator vibration 176, gasket cylinder head 177, seal o ring 178, clamp hose 179, clamp 180, clamp hose 181, sensor pressure 182, gauge temperature 183, pick up magnetic 184, valve pressure regulator 185, pump sea water 186, gasket rocker lever cover 187, motor spring starting 188, inhibitor corrosion premix 10 lt 189, gasket oil cooler core 190, hose plain 191, hose plain 192, sensor temperature 193, exchanger heat 194, gasket connection 195, thermostat 196, hose plain 197, hose plain 198, hose plain 199, gasket oil brkt to block 200, hose plain 201, bushing lub oil pump 202, bushing camshaft 203, hose plain 204, ring thrust 205, dowel pin 206, hose flexible 207, filter fuel text 208, pump fuel 209, hose flexible 210, hose flexible 211, hose flexible 212, hose flexible 213, hose flexible 214, hose flexible 215, pump lub oil 216, lever rocker 217, rockch lever 218, idler water pump 219, belt tensioning for sw pu 220, kit injector repair v1710 221, liner cylinder 222, hose flexible 223, mcb 2pole 6 amps 224, sensor card for excitation panel 225, manifold fuel drain 226, manifold fuel 227, gasket cylinder head 228, gasket set 229, rocker lever 230, engine nt 495 mg da 60 70kw 231, cock drain 232, screw hexagon head cap 233, screw hexagon head cap 234, seal o ring 235, gear 236, hose plain 237, nut heavy hexagon jam 238, element air cleaner 239, screw hex flange head cap 240, kit hand priming pump 241, belt v 242, l o filter std 3166554 3167 243, temperature sensor 244, retainer 245, gasket rocker lever cover 246, hose plain 247, spider jaw coupling 248, cleaner air 249, tube fuel supply 250, seal rectangular ring 251, gasket heat exchanger 252, element air cleaner 253, ring oil piston 254, hose flexible 255, clamp hose 256
Agency / Dept :
indian navy
Due Date :
Aug 17, 2026 (19 days left)
Tender Value :
3000
View Documents
T18 Ref No : 16464734
Location : ernakulam , kerala
Source : GEM Tenders
NEW TENDER
tender for ek3000b 100764 , ek3000b 121229 , ek3000b 181243k8 , ek3000b 212752 , ek3000b 219138 , ek3000b 2870878 , ek3000b 2884909 , ek3000b 3000171 , ek3000b 3035331c , ek3000b 3040377 , ek3000b 3040830 , ek3000b 3042353 , ek3000b 3046200 , ek3000b 3046424 , ek3000b 3047976 , ek3000b 3048808 , ek3000b 3048912 , ek3000b 3049333 , ek3000b 3050396 , ek3000b 3051427 , ek3000b 3054948 , ek3000b 3055099 , ek3000b 3055769 , ek3000b 3056429 , ek3000b 3056567 , ek3000b 3058848 , ek3000b 3058849 , ek3000b 3059972 , ek3000b 3060613 , ek3000b 3063166 , ek3000b 3065060 , ek3000b 3067568 , ek3000b 3067613 , ek3000b 3067616 , ek3000b 3069098 , ek3000b 3069174 , ek3000b 3069177 , ek3000b 3071160 , ek3000b 3073158 , ek3000b 3075658 , ek3000b 3077199 , ek3000b 3084149 , ek3000b 3084186 , ek3000b 3087740 , ek3000b 3089886 , ek3000b 3100308 , ek3000b 3166307 , ek3000b 3166554 , ek3000b 3167217 , ek3000b 3200287 , ek3000b 3201585 , ek3000b 3202210 , ek3000b 3225970k1 , ek3000b 3227902 , ek3000b 3229036 , ek3000b 3234239 , ek3000b 3235030 , ek3000b 3235031 , ek3000b 3235181 , ek3000b 3238194 , ek3000b 3238539 , ek3000b 3240034 , ek3000b 3241630 , ek3000b 3281791 , ek3000b 3281792 , ek3000b 3281793 , ek3000b 3282141 , ek3000b 3283462 , ek3000b 3283467 , ek3000b 3284623 , ek3000b 3288521 , ek3000b 3288689 , ek3000b 3302180 , ek3000b 3331403 , ek3000b 3377462 , ek3000b 3408326 , ek3000b 3408625 , ek3000b 3408632 , ek3000b 3411335 , ek3000b 3414587 , ek3000b 3501176 , ek3000b 3503677 , ek3000b 3529035 , ek3000b 3545647 , ek3000b 3545669 , ek3000b 3575210 , ek3000b 3593680 , ek3000b 3609833 , ek3000b 3609888 , ek3000b 3638601 , ek3000b 3642365 , ek3000b 3765575 , ek3000b 3802325 , ek3000b 3815373 , ek3000b 3820664 , ek3000b 3866493 , ek3000b 3872428 , ek3000b 3876910 , ek3000b 3879481 , ek3000b 3880630 ar57020 , ek3000b 3881011 , ek3000b 3897106 , ek3000b 3903640 , ek3000b 3905194 , ek3000b 3905449 , ek3000b 3906747 , ek3000b 3908830 , ek3000b 3912177 , ek3000b 3913627 , ek3000b 3917729 , ek3000b 3918498 , ek3000b 3918616 , ek3000b 3918776 , ek3000b 3918779 , ek3000b 3919299 , ek3000b 3920762 , ek3000b 3920994 , ek3000b 3921992 , ek3000b 3922639 , ek3000b 3922686 , ek3000b 3922846 , ek3000b 3922848 , ek3000b 3922849 , ek3000b 3923478 , ek3000b 3925273 , ek3000b 3927642 , ek3000b 3944163 , ek3000b 4058790 , ek3000b 4950440 , ek3000b 4963510 , ek3000b 4979720 , ek3000b 4988747 , ek3000b 4988952 , ek3000b 3928639 , ek3000b 3929016 , ek3000b 3929161 , ek3000b 3930347 , ek3000b 3931380 , ek3000b 3934048 , ek3000b 3934046 , ek3000b 3936993 , ek3000b 3937123 , ek3000b 3937555 , ek3000b 3938267 , ek3000b 3944153 , ek3000b 3945329 , ek3000b 3948095 , ek3000b 3963983 , ek3000b 3960043 , ek3000b 3959052, gasket front cover 1, elbow male adapter 2, gasket rear cover 3, screw hexagon head cap 4, nut lock 5, hose flexible 6, gasket oil pan 7, shaft acessory drive 8, seal grommet 9, belt v 10, valve exhaust 11, stud 12, spider jaw coupling 13, rod push 14, injector 15, piston engine 16, tube fuel drain 17, screw twelve point cap 18, shaft idler 19, screw captive washer cap 20, ring liner seal 21, liner cylinder 22, gasket sea water pump 23, compression ring 24, lever cam follower 25, barrel and plunger 26, injector 27, washer plain 28, hose plain 29, seal o ring 30, hose flexible 31, bearing thrust 32, gasket lub oil pump 33, gasket rear cover 34, gasket cover plate 35, coupling plain hose 36, gasket turbocharger 37, hose plain 38, sleeve exhaust connection 39, seal o ring 40, gasket hand hole 41, hose plain 42, valve intake 43, seal o ring 44, seal rectangular ring 45, resistor corrosion 46, gasket hydraulic pump 47, element lub oil filter 48, inhibitor corrosion concent 5 lt 49, seal keyway 50, seal o ring 51, guide valve stem 52, oil fog lubrication 53, hose plain 54, spacer bearing 55, valve air relay 56, lubricator air stg motor 57, filter compressed air 58, gasket sea water pump 59, kit piston ring set v 28 60, kit piston ring set 61, belt tensioning for sw pu 62, head cylinder 63, isolator vibration 64, spacer mounting 65, isolator vibration 66, screw banjo connector 67, actuator etr fuel control 68, control governor 69, gasket push rod cover 70, belt v ribbed 71, belt v ribbed 72, gasket breather 73, hose plain 74, tach digital optical 75, actuator etr fuel control 76, switch temperature 77, switch temperature 78, thermostat 79, hose flexible 80, turbocharger 81, plug threaded 82, turbocharger 83, kit turbo repair hc5a 84, kit tur repair 85, kit 4l turbo repair 86, turbocharger 87, pump lubricating oil 88, gear lub oil pumping 89, hose flexible 90, seal oil 91, gasket turbocharger 92, injector 93, hose elbow 94, hose plain 95, pump sea water 96, block rubber 97, pulley idler assly w p 98, pump fuel 99, kit piston 100, pump sea water 101, hose plain 102, filter fuel 103, rod push 104, seal rocker lever cover 105, hose flexible 106, insert valve 107, hose elbow 108, transducer oil pressure sender 109, screw hex flange head cap 110, screw hex flange head cap 111, hose plain 112, gear crankshaft 113, gasket connection 114, nozzle injector 115, hose elbow 116, hose plain 117, connection oil suction 118, screw hex flange head cap 119, set piston ring 120, clamp hose 121, clamp hose 122, clamp hose 123, camshaft 124, rotator valve 125, seal valve stem 126, bearing crankshaft thrust 127, gasket cylinder head 128, clamp hose 129, pump sea water 130, pump lubricating oil 131, pump fuel transfer 132, seal oil 133, thermostat 134, bearing main 135, piston engine 136, camshaft 137, gear fuel pump 138, pin piston 139, pin piston 140, gasket int manifold cover 141, stud 142, belt tensioner 143, gasket cylinder head 144, set main bearing std 145, bushing 146, kit liner 147, washer sealing 148, screw hex flange head cap 149, gasket oil pan 150
Agency / Dept :
indian navy
Due Date :
Aug 17, 2026 (19 days left)
Tender Value :
3000
View Documents
T18 Ref No : 16313318
Location : leh , ladakh
Source : GEM Tenders
LIVE TENDER
tender for led tube light (retrofit type) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , led batten light (led tube light) (v2) (q2) , cable joint kit suitable for cables up to and including 33 kv (v2) (q3) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2) , insulation tape , gi union socket , gi elbow reducer , gi nipple , distribution board 8 way , gi socket reducer , gi tubing med grade , gi plug 15 mm , gi tee reducer , cap plug gi , gi socket reducer 20 x25 mm , gi nipple 15 mm x 225mm long , socket reducer 25 x40 mm , gi nipple 25 mm x75 mm long , gi tubing med grade 40 mm , gi tee reducer 20 x 25 mm , gi nipple 25 mm x 50 mm long , mortice lock vertical type , knob alluminium anodized with screw , sliding door bolt ss 300 mm , pvc casing capping , pvc casing capping 15 mm , pvc casing capping 20 mm , gi nipple 15 mm x 75 mm long , gi nipple 20 mm x 50 mm long , gi nipple 15 mm x 50 mm long , pvc rectangular block for mounting switches , looking mirror for table dressing ladies , glass pane clear , pvc elbow 75mm , pvc elbow 110mm , pvc u-clamp heavy duty , glass pane clear 3 mm thick , gi tubing med grade 20 mm isi marked , gi tubing med gde 15 mm dia , gi tubing med grade 50 mm , pvc lamp holder angular , lamp holder pendent pvc , pvc cassing and capping , holder insulated body with back plate suitable for led lamp , butyl rubber water proof tape , supply only wall mounted fan 400 mm, insulation tape of size 15 mm width and 6 mtr long best quality 15mmx10mtr, gi union socket 80 mm isi mark, gi elbow reducer 20x25 mm isi marked, gi nipple 20 mm x 785 mm 20x24inch, distribution board 8 way make l t hpl havells, gi socket reducer 15 mm x20 mm, gi tubing med grade 25 mm isi marked, gi plug 15 mm isi marked, gi socket reducer 25 mm x 50 mm isi marked, gi elbow reducer 15 x 20 mm isi marked, gi socket reducer 50 mm x 15 mm isi marked, gi tee reducer 25 x 40 mm isi marked, gi tee reducer 50 x 15 mm isi marked, gi tee reducer 15x20 mm isi marked, gi elbow reducer 15 x 25 mm isi marked, cap/plug gi 40 mm, gi tee reducer 15 x 25 mm isi marked, gi socket reducer 20 x25 mm isi marked, gi nipple 15 mm x 225mm long isi marked, socket reducer 25 x40 mm, gi nipple 25 mm x75 mm long isi marked, gi tubing med grade 40 mm make jindal tata sail bhusan, gi tee reducer 20 x 25 mm, gi nipple 25 mm x 50 mm long isi marked, mortice lock vertical type size 70 mm b 444, knob alluminium anodized with screw, sliding door bolt ss 300 mm, pvc casing and capping of size 1.5 isi marked, pvc casing capping 15 mm, pvc casing capping 20 mm, pvc casing and capping of size 1, gi nipple 15 mm x 75 mm long isi marked, gi nipple 20 mm x 50 mm long isi marked, gi nipple 15 mm x 50 mm long isi marked, pvc rectangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated 100 mm x 100 mm and 50 mm deep make anchor havells legrand, looking mirror for table dressing ladies, glass pane clear 4.8 mm thick size 6 x 4 make modiguard saint gobain atul, pvc elbow 75mm make aashirvad finolex prince, pvc elbow 110mm make aashirvad finolex prince, pvc u-clamp heavy duty of size 1 inch, pvc u-clamp heavy duty of size 2 inch, pvc u-clamp heavy duty of size 4 inch, glass pane clear 3 mm thick size 6 x 4 make modiguard saint gobain atul, gi tubing med grade 20 mm isi marked, gi tubing med gde 15 mm dia (isi mark) 6 mtr length make jindal tata sail bhusan, gi tubing med grade 50 mm isi mark make jindal tata sail bhusan, pvc lamp holder angular make anchor havells polycab, lamp holder pendent pvc make anchor havells polycab, pvc cassing & capping of size 32mm x 12mm isi marked, holder insulated body with back plate for led lamp make anchor havells polycab, butyl rubber water proof tape (100mm x 5m), butyl rubber water proof tape (150mm x 5m), supply only wall mounted oscillating fan 400 mm sweep (16 inch) high torque induction brushless motor with copper winding, single phase ac supply 230 volt, 50 hz, 60 w, 1350 rpm, aerodynamically designed pvc (high grade plastic) body, corrosion resistant blade, silent operation, wide angle smooth oscillation, equipped with three speed selector with tilt mechanism, off white color complete with heavy duty wall mounted bracket and necesary electrical lead wire with plug, premium high speed with thermal over load protection complete all as specified and directed make havells, cromption, bajaj or equivalent.
Agency / Dept :
indian army
Due Date :
Jul 30, 2026 (1 day left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16242672
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for prefabricated living shelter 06 men , prefabricated living shelter 10 men , living shelter 20 men , ceiling fan 1400 mm , ceiling fan 1200 mm , 1100 v grade pvc insulated copper stranded conductor two core , led panel ceiling light , house service bracket , led tube light fittings 20w , led tube light fittings 40 w , switch socket combination 5 amp 5 pin , switch socket combination 6 amp 5 pin , switch socket combination 15 amp 5 pin , switch socket combination 20 amp 10 pin , piano type switch 6 amp , piano type switch 5 amp , rectangular pvc switch board , led flood light 18 w , fan regulator block for mounting switches , mcb db made of steel sheet , fr insulation tape , mcb 6 amp sp , mcb 10 amp sp , mcb 25 amp spn , pvc ceiling rose 6 amp , pvc casing capping 25 mm , pvc casing capping 32 mm , angle holder with 14w led bulb , pvc round block , pvc rectanular box 250x200x50mm , pvc rectangular box 175x100x50mm , black screws 4mmx19mm , black screws 6mm x 40 mm , 20 watt bulk head fitting , 10 w led flood light , 20 mm pvc conduits with bend , mcb 16 amp with spn , mcb 63aamp with spn , mcb sp 6-32a amp with spn , pvc insulated cable copper conductor 1 point 5 sqmm , pvc insulated cable copper conductor 2 point 5 sqmm , 1100 v grade frpvc insulated of size 1 point 5mm , 1100 v grade frpvc insulated of size 2 point 5mm , flexible pipe 1 inch , angle holder with lamp shed 9w led bulb , main switch 32 amp 240v spn , change over switch 32 amp , pvc square box , pvc innersheathed unarmed cable 10 sqmm two core , hange over switch 63 amp dp , main switch 63 amp with spn , 1100 v grade 3 core frpvc , earthing material , lightening arrestor system , cp cloth hook with six hooks , ms hook for ceiling fan , 25 mm dia drapery rod 1 point 20m , 25 mm dia drapery rod 1 point 05m , fire extinguisher foam 1 kg cap , vitrified coloured floor tiles , looking mirror , ms single bed , ms single bunk bed , ms double bunk bed , steel locker , ms cabinet , wooden table , plastic chair , chromium plated peg set , aluminum peg stay of four hooks , mild steel chromium plated 25 mm dia , 6mm screw 100 mm long , white cement , ms binding wire , turpentine oil , red oxide , weather proof exterior base paint , synthetic enamel paint , brush 4 inch , brush 2 inch , wall putty , cement primer , integral water proofing compound , stainer 200 ml , vitrified double charged floor tiles , anti-skid coloured floor tiles , leak proof compound , non asbestos fibre cement designer board false ceiling , main vertical ms angle of size 60x60x6mm , horizontal ms angle of size 60x60x6mm , galvanised iron wire dia 3 mm length , erection tools , mild steel semi-automatic portable concrete vibrator, living shelters, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 1, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 2, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 3, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 4, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 5, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 6, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 7, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 8, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 9, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 10, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 11, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 12, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 13, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 14, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 15, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 16, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 17, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 18, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 19, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 20, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 21, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 22, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 23, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 24, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 25, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 26, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 27, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 28, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 29, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 30, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 31, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 32, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 33, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 34, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 35, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 36, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 37, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 38, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 39, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 40, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 41, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 42, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 43, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 44, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 45, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 46, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 47, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 48, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 49, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 50, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 51, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 52, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 53, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 54, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 55, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 56, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 57, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 58, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 59, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 60, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 61, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 62, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 63, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 64, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 65, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 66, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 67, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 68, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 69, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 70, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 71, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 72, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 73, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 74, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 75, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 76, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 77, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 78, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 79, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 80, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 81, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 82, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 83, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 84, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 85, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 86, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 87, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 88, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 89, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 90, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 91, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 92, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 93, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 94
Agency / Dept :
indian army
Due Date :
Aug 03, 2026 (5 days left)
Tender Value :
0
View Documents
T18 Ref No : 16241732
Location : hazaribagh , jharkhand
Source : GEM Tenders
LIVE TENDER
tender for hand cultivator , gardening shears , hedge shears , spades small big , pickaxe small big , hammer ballpieen claw , cutting plier , crow bar , hand saw hack saw , cutter , gardening gloves , seedling tray , watering can hose pipe , rubber gardening gloves , plant labels , spray bottle 5 litre , wheel barrow , bin and tarpaulin , potting soil , seeds seedlings , neem leaves powder , manure organic inorganic , organic mulching materials , pllastic fibre tub , fibre tray rectangular , metal steel tray , 48 planter hydroponic nft kit , 36 plant vertical hydroponic and aeroponic tower , hydroponic system deep water cuture for 20 plants setup , beginners hydroponic kit , wall control metal peg board for for meatal tools , 10 inch pipe wrench , satellite communication , led tv simulator , water purifier aquaguard simulator , reverse osmosis cycle simulator , refridgerater trainer kit simulator , motorized potter wheel kit , computer hardware trainer kit, gardening tools and equipments and simulators for vocational lab, 3 prong or 5 prong hand cultivator rake blade prongs made of high grade rust resistant carbon steel or powder coated iron ergonomic handle with heavy duty thermoplastic rubber tpr or polished hardwood grip overall length 30 cm to 35cm used for loosening soil and weeding brand make kraft seeds or falcon or falcon premium, heavy duty bypass pruning secateurs shears blade material high carbon sk5 steel with non stick coating for smooth clean cuts up to 20 mm diameter branches features a secure safety lock mechanism and an embedded shock absorbing spring handle with non slip vinyl coating brand make falcon fps 1 or wolf garten or sharpex, manual hedge trimmer with wavy straight blades blade length minimum 8 to 10 inches 20 to 25 cm made of hardened high carbon steel with adjustable blade tension knob heavy duty tubular steel handles or reinforced aluminum handles with comfortable rubberized grip bumpers to reduce fatigue brand make falcon fhs 99 or sharpex or pepper agro, heavy duty steel digging spade shovel shovel head made of hardened tempered carbon steel 14 gauge thick steel profile small variant total length approx 70 cm with short d grip handle big variant total length approx 100cm with long tubular steel shaft or premium ash wood shaft brand make tata agrico or falcon or chillington, double headed forging steel pick mattock pickaxe head weight 1 5kg small to 3 0 kg big drop forged from high grade carbon steel heat treated for edge hardness includes a shock resistant fiberglass or heavy duty hickory wood handle minimum length 90 cm one side pointed tip opposite side flat chisel edge brand make tata agrico or taparia or pioneer, 500gram drop forged steel head induction hardened claw hammer 450gram curved claw head for nail pulling both must feature an unbreakable fiberglass handle with a shock absorbing rubber grip jacket permanently bonded to the head brand make taparia or stanley or yuri, combination cutting pliers length 8 inches 200 mm forged from high quality chrome vanadium cr v steel oil hardened jaws feature a multi zone layout for gripping flat round stock and cutting hard wire handles must have heavy duty dual component insulation sleeve rated up to 1000 v for electrical safety brand make taparia 1621 8ni or stanley or pye, hexagonal profile steel wrecking pry bar crowbar length 3 to 4feet 90 to 100 cm thickness 25 mm solid core made of forged carbon steel hardened and tempered features one chisel cutting edge on one side and a swan neck curved claw profile on the other for high leverage prying brand make tata agrico or local forged industrial grade or pye, specification hand saw woodworking saw 18 inch spring steel blade induction hardened aggressive triple ground teeth hacksaw heavy duty tubular square steel frame with adjustable tension wing nut compatible with 12 inch 300 mm bi metal shatterproof blades ergonomic d shape handle brand make stanley or taparia or miranda, heavy duty multi purpose retractable snap off utility knife cutter body made of zinc alloy casting with a stainless steel inner blade slider channel and an auto lock mechanism slide slider accommodates 18 mm wide high carbon steel multi segment snap blades must include a rubber cushion grip body casing brand make olfa or stanley or maped, heavy duty canvas cotton blend gardening gloves with premium split cowhide or reinforced synthetic leather palms features puncture resistant thorn protection and an elastic wrist cuff to block soil debris designed with an ergonomic wing thumb for flexible handling of hand tools brand make wolf garten or falcon or kraft seeds, 50 cell or 102 cell germination seedling plug trays made from high flexibility eco friendly food grade virgin pvc or thick polypropylene minimum thickness 0 8mm to resist cracking features a bottom drainage hole matrix for root aeration and waterlogging prevention brand make trust basket or kraft seeds or pepper agro, 5 litre high density polyethylene hdpe body with a detachable long brass stainless steel fine spray rosette nozzle hose pipe 3 4 inch braided 5 layer pvc weather resistant garden hose 25meters length complete with a multi pattern adjustable spray gun widget and leak proof brass click lock connectors brand make garuda falcon or sharpex or zephyr, 100 percent industrial grade waterproof nitrile or natural latex rubber gloves features extra long sleeves 30 to 35 cm for chemical defense during fertilizer pesticide mixing a textured non slip diamond grid grip surface on palms fingers and a soft moisture wicking inner flocked cotton lining brand make 3m or honeywell or ansell, t type waterproof plastic plant tags labels made of rigid uv stabilized non brittle pvc plastic dimensions 6 cm x 10 cm writing area with a pointed 5cm anchor stem must accept matte waterproof markings from industrial oil based permanent markers brand make trust basket or kraft seeds or generic imported, 5 litre manual compression pressure tank sprayer heavy duty hdpe transparent container tank with a pressure release safety valve stable base plate built in air pump piston and an adjustable shoulder carry strap includes a 50cm fiberglass or brass lance wand with an adjustable brass misting tip brand make falcon fap 5 or aspee or kisankraft, single wheel deep pan industrial wheelbarrow heavy gauge 16 gauge or 1 2 mm thickness seamless pressed steel tray container rust proof powder coating minimum payload capability of 120 kg 60litres reinforced frame with tubular steel leg supports and a 14 inch heavy duty pneumatic rubber wheel with double ball bearings brand make tata agrico or nilkamal or heavy steel local industrial fabricated, 60 litre heavy duty industrial plastic dustbin with a secure swing lid dual handles and puncture resistant virgin hdpe construction tarpaulin heavy duty multi layer 250 gsm cross laminated 100 percent waterproof plastic sheet 12ft x 12 ft size with ultrasonic heat sealed borders and reinforced aluminum eyelets every 3 feet brand make nilkamal bin supreme tarpaulin or sintex shalimar, premium organic lightweight ready potting soil mix sterilized and pre blended inside commercial polybags composition ratio breakdown must closely hit 40 percent vermicompost manure 30 percent sphagnum peat processed coco peat fiber 20 percent natural topsoil and 10 percent aerating perlite free of weed seeds chemical residue and soil pathogens brand make trust basket or casa de amor or ugaoo, high yield f1 hybrid certified true to type non gmo agricultural seeds packed inside hermetically sealed foil sachets variety including leafy greens herbs vegetables seedlings 30 to 40 day old healthy pest free well hardened nursery stock varieties raised in standard root plugs with an active terminal bud and minimal physical damage brand make namdhari seeds syngenta or mahyco indo american seeds set comprises 5 seed packets and 50 seedlings as specified, 100 percent pure unadulterated organic cold pressed neem cake leaf powder fertilizer produced from de oiled neem seeds and leaves natural azadirachtin content minimum 1000ppm to serve as a biological systemic pesticide soil nematicide and slow release organic nitrogen fertilizer conditioner brand make casa de amor or trust basket or pepper agro, fully decomposed odor free premium dark culture vermicompost or dry cow dung manure enriched with natural micro nutrients total nitrogen phosphorus potassium n p k element matrix baseline 1 1 1 percent sifted using a 5mm screening mesh to guarantee complete freedom from large stones plastic fibers and clump clusters brand make ugaoo or trust basket or iffco urban gardens, natural double shredded hardwood wood chips or organic coco coir husk chips cleaned dried and graded to a uniform size particle profile 15 30 mm highly effective for moisture retention soil temperature regulation and weed suppression free of chemical dyes wood preservatives and termites brand make kraft seeds or casa de amor or generic agro suppliers, heavy duty rectangular or circular industrial plastic wash potting tubs capacity 45 to 60 litres molded from impact resistant high density virgin polypropylene plastic with thick reinforced rim edges and integrated ergonomic molded carry handles brand make nilkamal or supreme or joyo, heavy duty fiber reinforced plastic frp or thick injection molded plastic rectangular potting base trays dimensions minimum 24inches x 12 inches x 3 inches deep profile uv stabilized construction to prevent cracking under extended direct sunlight completely watertight flat bed floor with a single side drainage plug brand make trust basket or sharpex or pepper agro, premium 22 gauge thick heavy duty galvanized iron gi or 304 grade stainless steel containment utility storage trays rectangular shape dimensions matching 24inches x18 inches x2 inches height with rolled in safety smooth edges leak proof welded corner seams and a rust resistant industrial zinc coated layer brand make local specialized steel fabricator or generic, complete commercial grade nutrient film technique nft hydroponic loop system features food grade uv stabilized heavy metal free virgin upvc channels with 48 allocated pre drilled growing slots includes an internal 18w submersible water pump a dedicated 50 60 litre master nutrient storage reservoir tank 48 plastic net pots a starter set of clay ball growth media concentration nutrient solutions grow micro bloom and an automated digital cyclic timing panel switch brand make casa de amor 40 48 plants system or city greens nft smart series, multi tier space saving vertical aeroponic hydroponic modular grow tower configured with 36 dedicated plant grow pocket sockets engineered with food grade virgin abs pp core plastic layers features an internal high lift continuous duty water pump inside a base 60l nutrient holding tank an internal micro sprinkler distribution mist manifold line net cups clay balls and a digital programmable operation timer clock brand make green warrior or city greens vertical series, deep water culture dwc multi reservoir plant hydroponic system supporting 20 plants features heavy duty light blocking food grade plastic growth tanks equipped with custom lids includes an industrial grade dual outlet external electromagnetic air aeration pump continuous duty airstones premium silicone airline hoses 20 high airflow net cups structural leca clay ball media substrate and an explicit starter array of liquid hydroponic macro micro nutrients brand make casa de amor or city greens dwc master, all in one entry level introductory dwc nft educational hydroponic workbench kit package contains 1 food grade virgin plastic growth reservoir tray channel housing 5 to 10 growing slots matching net cups a compact external aeration air pump module with air stone lines pre measured mineral nutrient concentration bottles a mixed assortment packet of leafy green seeds expansion coir coins leca balls and a step by step beginner instruction guide brand make city greens beginner series dwc kit or trust basket, heavy duty industrial grade vertical wall mounted organization panel assembled layout dimension 48 inches width x 24 inches height composed of modular high strength 20 gauge steel sheets features an electro powder coated scratch resistant enamel finish pre formed return flange edges elevate panels directly off the mounting face wall eliminating extra tracking framing must accept both standard 1 4 inch round pegboard hooks and specialized slotted high security locking brackets includes a 30 piece assorted heavy duty tool mounting hook kit screwdrivers hammers and wrench rack sets brand make wall control usa imported or ascend tools india tata agrico modular storage, heavy duty 10 inch 250 mm straight pipe wrench manufactured from drop forged high carbon steel with hardened serrated alloy steel jaws precision knurled adjustment nut corrosion resistant finish and ergonomic handle suitable for gripping gi ms pvc and cpvc pipes up to 50 mm diameter brand make taparia stanley ridgid ingco or equivalent, advanced satellite communication trainer for demonstrating principles of satellite communication uplink downlink transmission modulation techniques transponder operation microwave communication digital communication antenna alignment gps fundamentals vsat communication and signal propagation the trainer shall include digital satellite communication training module uplink downlink demonstration microwave rf module antenna alignment system gps receiver module signal strength indicator digital display usb interface pc connectivity python compatible serial communication arduino raspberry pi interface software for data acquisition and experiments student experiment manual minimum 25 experiments power supply230v acaccessories coaxial cables rf connectors patch antenna software user manual brand make scientech technologies, working led smart television trainer with transparent demonstration panel showingsmps main board t con board led driver display panel power supply hdmi usb wifi android tv architecture fault simulation switches measurement test points block diagram oscilloscope test points computer interface usb python compatible data acquisition digital fault diagnosis software minimum experiments20 suitable forelectronics ai vision embedded systems computer hardware brand make scientech ses nvis technologiesor equivalent, cut section working model of domestic ro water purifier demonstrating sediment filter carbon filter ro membrane uv chamber uf filter tds controller booster pump solenoid valve float switch flow restrictor pressure switch digital sensors tds sensor flow sensor pressure sensor water quality monitoring arduino compatible iot compatible python compatible cloud data logging compatible suitable for stem and ai projects brand make kent training model eureka forbes livpure scientech or equivalent, specificationeducational trainer demonstrating reverse osmosis water pressure semi permeable membrane osmotic pressure water recovery tds removal digital pressure gauges flow meters pressure sensors tds sensorscomputer interface arduino esp32 python iot data logging minimum 20 experiments brand make scientech ses edutek, working refrigeration cycle demonstrator with transparent refrigeration system demonstrates compressor condenser evaporator expansion valve thermostat refrigerant flow pressure measurement temperature sensors digital display computer interface usb arduino python fault simulation minimum 25 experiments brand make scientech nvis ses or equivalent, professional electric potter wheel 350 450 w brushless motor speed control 0 300 rpm 14 inch aluminium wheel head splash pan foot pedal reversible rotation clay tools set workbench suitable for art design stem product design ai generated design prototyping brand make vevor indian pottery wheel manufacturers clay kingor equivalent, wall mounted simulation of computer hardware and understanding the assembly concept using monitor motherboard smps hard disk ram power cod sata cable entrepreneutship application of science job oriented concept asthetics value to lab real time simulation of a computer hardware understanding the concept of computer hardware proficiency in using computer hardware and equipment familarity with block diagrams and operating principles advanced computer hardware networking trainer kit designed for vocational education stem laboratories and computer hardware practical training the trainer shall facilitate hands on learning in computer assembly troubleshooting maintenance peripheral interfacing networking fundamentals and hardware diagnostics the trainer shall consist of an open frame modular desktop system enabling easy access to all internal components for demonstration and experimentation brand make scientech technologies pvt ltd nvis technologies pvt ltd ses instrument
Agency / Dept :
kendriya vidyalaya sangathan KVS
Due Date :
Aug 05, 2026 (7 days left)
Tender Value :
350000
View Documents
T18 Ref No : 16387761
Location : kolkata , west bengal
LIVE TENDER
tender for repair and painting work exterior portion of existing circular, rectangular and exterior of old block,nift academic building saltlake kolkata.(balance work).sh: additional putty work of external surface at old block of nift campus on urgent basis to make the surface even.
Agency / Dept :
central public works department CPWD
Due Date :
Jul 29, 2026 (Expire Today)
Tender Value :
555722
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16445736
Location : dantewada - cg , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for procurement of spares for locomotives model wds6 and wdg3a 1600049678_gasket cover to housing p n 10170194 , 1600465189_rubber kit hs 4 valve p n 11375036 , 1600465190_horn repair kit p n 11430412 , 1600465191_mu2b repair kit p n 11377070 , 1600012640_gasket cover base p n 10130184 , 1600465192_mu top switch p n 12319351 , 1600465193_gasket base door p n 10170248 , 1600465194_classification light switch 12313701 , 1600012727_rubber piller a ccou p n 11429987 , 1600049621_governor air comprsor elect p n 11360471 , 1600012647_gasket elbow block p n 10170522 , 1600465196_gasket elb to cyl head 10170492 10170510 , 1600465204_valve air horn p n 11390025 , 1600465207_split pin 10mm x45 mm long 11365985 , 1600465208_split pin 5mm x25 mm p n 11307090 , 1600465210_fuel male elbow 90 5 8 1 2 11329890 , 1600049684_adapter hose to heads 7 8 14x1 2 ips 11329737 , 1600465213_gasket coupling clamp p n 10240445 , 1600012648_gascket pipe p n 10170534 , 1600049631_valve relay c2 p n 11457170 , 1600049632_valve relay c2 w 6mm choke over charge 11452810 , 1600049622_pressure switch rt 5x p n 11459219 , 1600049615_4 gauge brake cyl w led p n 11445488 , 1600465215_4 duplex air gauge mr fe 11445476 , 1600049616_6 gauge brake pipe w led p n 11445518 , 1600012718_kit for a 9 valve p n 11375371 , 1600012721_rubber kit sa9 valve p n 11377010 , 1600031737_autl drain valve kit p n 11390049 , 1600465218_tappet cover gasket p n 10170686 , 1600465219_wiper blade p n 114401120 , 1600465220_car body filter p n 11440065 , 1600465221_long life lube oil filter p n 9005064 , 1600465222_c 2 relay valve kit 6mm choke 11373143 , 1600465223_push button yellow p n 12314780 , 1600465224_push button black p n 12314791 , 1600031739_c2 rly valve p n 11360136 , 1600465225_mr drain cock 1 2 p n 11397044 , 1600065735_primary fuel filter p n 10051557 , 1600012633_filter element p n 10051521 , 1600022208_lub oil fltr element filtronic make 11440259 , 1600465226_hp spring liner p n 11382661 , 1600465227_hp spring outer p n 11382650 , 1600465228_cam roller p n 10211226 , 1600012765_m c b 30 amps p n 12319417 , 1600012764_mini circuit br 15am p n 12319363 , 1600031749_mcb 150vdc ac 100amp p n 12319375 , 1600465230_low water alarm switch p n 12315175 , 1600465231_wheel sleep buzzer p n 12178020 , 1600049650_o ring lube oil cover gasket 11270287 , 1600465232_gasket n16 governor p n 11424025 , 1600049638_grease nipple p n 12495669 , 1600465233_gm type auto drain mr p n 11390059 , 1600049626_valve brake automatic a9 p n 11452780 , 1600031738_indep brake valve p n 11360021 , 1600465234_gasket manifold cylinder head 10170479 , 1600012712_j filter p n 11360306 , 1600012730_guage main resorvoir p n 11440193 , 1600031736_guage brake pipe p n 11440181 , 1600465236_gauge control air p n 11440211 , 1600012731_guage f o press p n 11440417 , 1600012728_glo rod guage p n 11440028 , 1600465237_roller rubber p n 11429487 , 1600465238_horn two bell p n 11439087 , 1600012769_brush carbon generat p n 12420475 , 1600031741_limit switch p n 11391258 , 1600465240_brush carbon traction motor 12420499 , 1600022205_vrp voltage regulator p n 12190986 , 1600012763_m h stop switch p n 12319357 , 1600465241_head lamp switch p n 12319247 , 1600465242_light switch p n 12319211 , 1600012768_carbon brush aux gen p n 12420189 , 1600049651_air whistle assly p n 11664265 , 1600844674_brake shoe key p n 11231183 , 1600844675_mu 2b valve p n 11360033 , 1600844676_valve brake a9 automatic p n 11360010 , 1600844677_battery assy 500 amps 70 4 volt 12640037 , 1700000243_v belt b 78 b 78 belt to be supplied as per is 2494 is 14261 , 1600014716_hour meter 72 volts dc panel mount rectangular type lxw 40 5x27 4mm , 1600144914_v belt b120 17mm 11mm b 120 belt to be supplied as per is 2494 is 14261 , 1700008093_v, 1600049678_gasket cover to housing p n 10170194, 1600465189_rubber kit hs 4 valve p n 11375036, 1600465190_horn repair kit p n 11430412, 1600465191_mu2b repair kit p n 11377070, 1600012640_gasket cover base p n 10130184, 1600465192_mu top switch p n 12319351, 1600465193_gasket base door p n 10170248, 1600465194_classification light switch 12313701, 1600012727_rubber piller a ccou p n 11429987, 1600049621_governor air comprsor elect p n 11360471, 1600012647_gasket elbow block p n 10170522, 1600465196_gasket elb to cyl head 10170492 10170510, 1600465204_valve air horn p n 11390025, 1600465207_split pin 10mm x45 mm long 11365985, 1600465208_split pin 5mm x25 mm p n 11307090, 1600465210_fuel male elbow 90 5 8 1 2 11329890, 1600049684_adapter hose to heads 7 8 14x1 2 ips 11329737, 1600465213_gasket coupling clamp p n 10240445, 1600012648_gascket pipe p n 10170534, 1600049631_valve relay c2 p n 11457170, 1600049632_valve relay c2 w 6mm choke over charge 11452810, 1600049622_pressure switch rt 5x p n 11459219, 1600049615_4 gauge brake cyl w led p n 11445488, 1600465215_4 duplex air gauge mr fe 11445476, 1600049616_6 gauge brake pipe w led p n 11445518, 1600012718_kit for a 9 valve p n 11375371, 1600012721_rubber kit sa9 valve p n 11377010, 1600031737_autl drain valve kit p n 11390049, 1600465218_tappet cover gasket p n 10170686, 1600465219_wiper blade p n 114401120, 1600465220_car body filter p n 11440065, 1600465221_long life lube oil filter p n 9005064, 1600465222_c 2 relay valve kit 6mm choke 11373143, 1600465223_push button yellow p n 12314780, 1600465224_push button black p n 12314791, 1600031739_c2 rly valve p n 11360136, 1600465225_mr drain cock 1 2 p n 11397044, 1600065735_primary fuel filter p n 10051557, 1600012633_filter element p n 10051521, 1600022208_lub oil fltr element filtronic make 11440259, 1600465226_hp spring liner p n 11382661, 1600465227_hp spring outer p n 11382650, 1600465228_cam roller p n 10211226, 1600012765_m c b 30 amps p n 12319417, 1600012764_mini circuit br 15am p n 12319363, 1600031749_mcb 150vdc ac 100amp p n 12319375, 1600465230_low water alarm switch p n 12315175, 1600465231_wheel sleep buzzer p n 12178020, 1600049650_o ring lube oil cover gasket 11270287, 1600465232_gasket n16 governor p n 11424025, 1600049638_grease nipple p n 12495669, 1600465233_gm type auto drain mr p n 11390059, 1600049626_valve brake automatic a9 p n 11452780, 1600031738_indep brake valve p n 11360021, 1600465234_gasket manifold cylinder head 10170479, 1600012712_j filter p n 11360306, 1600012730_guage main resorvoir p n 11440193, 1600031736_guage brake pipe p n 11440181, 1600465236_gauge control air p n 11440211, 1600012731_guage f o press p n 11440417, 1600012728_glo rod guage p n 11440028, 1600465237_roller rubber p n 11429487, 1600465238_horn two bell p n 11439087, 1600012769_brush carbon generat p n 12420475, 1600031741_limit switch p n 11391258, 1600465240_brush carbon traction motor 12420499, 1600022205_vrp voltage regulator p n 12190986, 1600012763_m h stop switch p n 12319357, 1600465241_head lamp switch p n 12319247, 1600465242_light switch p n 12319211, 1600012768_carbon brush aux gen p n 12420189, 1600049651_air whistle assly p n 11664265, 1600844674_brake shoe key p n 11231183, 1600844675_mu 2b valve p n 11360033, 1600844676_valve brake a9 automatic p n 11360010, 1600844677_battery assy 500 amps 70 4 volt 12640037, 1700000243_v belt b 78 b 78 belt to be supplied as per is 2494 is 14261, 1600014716_hour meter 72 volts dc panel mount rectangular type lxw 40 5x27 4mm, 1600144914_v belt b120 17mm 11mm b 120 belt to be supplied as per is 2494 is 14261, 1700008093_v belt b 75 b 75 belt to be supplied as per is 2494 is 14261
Agency / Dept :
national mineral development corporation limited nmdc limited
Due Date :
Aug 14, 2026 (16 days left)
Tender Value :
0
View Documents
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
LIVE TENDER
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026 (1 day left)
Tender Value :
0
View Documents
T18 Ref No : 15348531
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for supply of offrs jcos living shelter , details of electrical items , house service bracket , switch piano type 5a 230 volt , socket 5 oblique 6 a 5 pin 230 volts , switch piano type 15a 230 volts , socket 15 oblique 16a 5 pin 230 volts , led panel ceilling light , led tube light fitting , led lamp 14 watt conforming to is 9405 , ceiling fan complete , instantaneous electric water heater , heavy duty exhaust fan 250 mm , bulk head fitting 18 watt led , pvc ceiling rose 3 terminal 230 volts , batten angle holder 230 volts , pvc square block mounting of celling rose , pvc rectangular block for mounting switches , cadmium plated machined screw , 1100 v grade fr pvc insulated and copper conductor , 1100 v grade fr pvc insulated multistranded copper , pvc casing and capping of size 25 mm , pvc t junction box for pvc casing caping , elbow pvc for casing and caping , pvc conduit non mettallic 20 mm dia , sheet metal enclosure spn db , mcb spn 32 amp 230 volts , mcb sp 10 amp 230 volts , mcb sp 6 amp 230 volts , 1100 v grade frpvc insulated and sheathed 3 core , 32 amp on load change over switch , insulation tape 19mm wide , flexible pipe 1 inch is marked , one earthing set per shelter , prefabricated gel earthing electrode of pipe , looking mirror with plastic decorative frame , cp cloth hook with six hooks , ms hook for ceiling fan , zebra blind made of wooden colour fabrics over window , curtain oblique drapery rod , supply of wpc , septic tank cover , soakage pit cover , man hole cover , non skid floor tiles , double charged vitrified ceramic floor tiles , dado anti skid coloured floor tiles , white cement , hydraulic door closer complete , powder type fire extinguisher of 1 kg capacity , gun for silicon gel , silicon gel , paint brush 4 inch , paint brush 2 inch , non asbestos fibre cement designer board , rotational moulded polyethylene water storage tanks , gi nipple 150 mm long 20mm dia , gi tank niple 20 mm dia , gi socket 20 mm dia , gate valve brass 20 mm dia , float valve pvc 20mm , water tank staging with accessories , gi pipe 20mm dia , gi socket 20mm dia , gi elbow , gi union 20mm , gi reducer socket , gi t 20 mm dia , gi nipple 20 mm dia , gi 15 mm dia , gi socket 15 mm dia , gi union 15 mm dia , gi elbow 15 mm dia , gi t20 15 mm dia , gi t equal 15 mm dia , gi nipple 15 mm dia 75mm long , gi nipple 15 mm dia 50mm long , cotton thread , safeda , chromium plated stop valve , chromium plated shower rose of 125mm dia , fancy type chromium plated bib tap , fancy type chromium plated long body , fancy type chromium plated two way angle wall , clamps for fixing gi pipes 15 mm , vitreous china whb alongwith accessories , toilet paper holder , vitreous china ewc white colour , cp shower rose , pvc low level flushing cistern , cabinet mirror , cp towel rail , double soap dish chromium plated , 75mm pvc vent pipe with cowl , pvc connection pipe , pvc waste pipe , bathroom cabinat , health faucet abs body , water pressure pump , stainless steel sink , sewage connection with accessories , pvc swr bends and tee 75mm , pvc swr bends and tee 110 mm , pvc swr floor trap , chromium plated grating , pvc branch piece 110mm bore , pvc swr pipe 75mm , steel locker , wooden bed queen size , plastic chair with cushion , ms shoe rack , wooden table , ms equal angel for cloth drying fixtures , galvanised iron wire , erection tools with complete accessories, offrs jco living shelter, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 1, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 2, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 3, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 4, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 5, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 6, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 7, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 8, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 9, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 10, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 11, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 12, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 13, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 14, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 15, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 16, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 17, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 18, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 19, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 20, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 21, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 22, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 23, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 24, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 25, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 26, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 27, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 28, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 29, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 30, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 31, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 32, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 33, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 34, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 35, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 36, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 37, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 38, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 39, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 40, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 41, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 42, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 43, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 44, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 45, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 46, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 47, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 48, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 49, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 50, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 51, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 52, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 53, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 54, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 55, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 56, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 57, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 58, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 59, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 60, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 61, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 62, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 63, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 64, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 65, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 66, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 67, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 68, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 69, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 70, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 71, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 72, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 73, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 74, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 75, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 76, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 77, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 78, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 79, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 80, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 81, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 82, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 83, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 84, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 85, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 86, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 87, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 88, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 89, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 90, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 91, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 92, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 93, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 94, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 95, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 96, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 97, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 98, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 99, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 100, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 101, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 102, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 103, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 104, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 105, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 106, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 107, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 108, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 109, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 110, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 111, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 112, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 113, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 114, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 115, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 116, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 117
Agency / Dept :
indian army
Due Date :
Jun 02, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15412688
Location : jammu , jammu & kashmir
Source : GEM Tenders
tender for supply of offrs jcos living shelter , details of electrical items , house service bracket , switch piano type 5a 230 volt , socket 5 oblique 6 a 5 pin 230 volts , switch piano type 15a 230 volts , socket 15 oblique 16a 5 pin 230 volts , led panel ceilling light , led tube light fitting , led lamp 14 watt conforming to is 9405 , ceiling fan complete , instantaneous electric water heater , heavy duty exhaust fan 250 mm , bulk head fitting 18 watt led , pvc ceiling rose 3 terminal 230 volts , batten angle holder 230 volts , pvc square block mounting of celling rose , pvc rectangular block for mounting switches , cadmium plated machined screw , 1100 v grade fr pvc insulated and copper conductor , 1100 v grade fr pvc insulated multistranded copper , pvc casing and capping of size 25 mm , pvc t junction box for pvc casing caping , elbow pvc for casing and caping , pvc conduit non mettallic 20 mm dia , sheet metal enclosure spn db , mcb spn 32 amp 230 volts , mcb sp 10 amp 230 volts , mcb sp 6 amp 230 volts , 1100 v grade frpvc insulated and sheathed 3 core , 32 amp on load change over switch , insulation tape 19mm wide , flexible pipe 1 inch is marked , one earthing set per shelter , prefabricated gel earthing electrode of pipe , looking mirror with plastic decorative frame , cp cloth hook with six hooks , ms hook for ceiling fan , zebra blind made of wooden colour fabrics over window , curtain oblique drapery rod , supply of wpc , septic tank cover , soakage pit cover , man hole cover , non skid floor tiles , double charged vitrified ceramic floor tiles , dado anti skid coloured floor tiles , white cement , hydraulic door closer complete , powder type fire extinguisher of 1 kg capacity , gun for silicon gel , silicon gel , paint brush 4 inch , paint brush 2 inch , non asbestos fibre cement designer board , rotational moulded polyethylene water storage tanks , gi nipple 150 mm long 20mm dia , gi tank niple 20 mm dia , gi socket 20 mm dia , gate valve brass 20 mm dia , float valve pvc 20mm , water tank staging with accessories , gi pipe 20mm dia , gi socket 20mm dia , gi elbow , gi union 20mm , gi reducer socket , gi t 20 mm dia , gi nipple 20 mm dia , gi 15 mm dia , gi socket 15 mm dia , gi union 15 mm dia , gi elbow 15 mm dia , gi t20 15 mm dia , gi t equal 15 mm dia , gi nipple 15 mm dia 75mm long , gi nipple 15 mm dia 50mm long , cotton thread , safeda , chromium plated stop valve , chromium plated shower rose of 125mm dia , fancy type chromium plated bib tap , fancy type chromium plated long body , fancy type chromium plated two way angle wall , clamps for fixing gi pipes 15 mm , vitreous china whb alongwith accessories , toilet paper holder , vitreous china ewc white colour , cp shower rose , pvc low level flushing cistern , cabinet mirror , cp towel rail , double soap dish chromium plated , 75mm pvc vent pipe with cowl , pvc connection pipe , pvc waste pipe , bathroom cabinat , health faucet abs body , water pressure pump , stainless steel sink , sewage connection with accessories , pvc swr bends and tee 75mm , pvc swr bends and tee 110 mm , pvc swr floor trap , chromium plated grating , pvc branch piece 110mm bore , pvc swr pipe 75mm , steel locker , wooden bed queen size , plastic chair with cushion , ms shoe rack , wooden table , ms equal angel for cloth drying fixtures , galvanised iron wire , erection tools with complete accessories, supply of offrs jcos living shelter, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 1, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 2, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 3, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 4, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 5, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 6, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 7, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 8, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 9, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 10, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 11, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 12, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 13, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 14, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 15, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 16, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 17, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 18, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 19, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 20, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 21, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 22, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 23, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 24, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 25, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 26, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 27, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 28, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 29, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 30, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 31, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 32, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 33, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 34, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 35, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 36, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 37, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 38, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 39, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 40, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 41, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 42, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 43, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 44, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 45, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 46, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 47, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 48, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 49, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 50, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 51, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 52, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 53, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 54, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 55, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 56, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 57, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 58, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 59, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 60, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 61, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 62, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 63, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 64, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 65, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 66, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 67, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 68, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 69, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 70, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 71, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 72, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 73, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 74, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 75, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 76, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 77, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 78, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 79, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 80, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 81, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 82, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 83, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 84, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 85, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 86, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 87, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 88, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 89, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 90, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 91, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 92, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 93, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 94, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 95, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 96, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 97, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 98, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 99, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 100, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 101, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 102, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 103, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 104, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 105, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 106, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 107, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 108, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 109, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 110, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 111, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 112, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 113, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 114, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 115, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 116, description along with complete specification and quantity of the item is uploaded in item specification document attached at s no 117
Agency / Dept :
indian army
Due Date :
Jun 08, 2026
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rectangular Block. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rectangular Block sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rectangular Block Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rectangular Block, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rectangular Block Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rectangular Block Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rectangular Block.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rectangular Block depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rectangular Block Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rectangular Block bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rectangular Block. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rectangular Block, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rectangular Block, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rectangular Block?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rectangular Block tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rectangular Block?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rectangular Block, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rectangular Block is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All