sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

111Latest Packing and jointing Tenders List

Latest Packing and jointing Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Packing and jointing tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Packing and jointing tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Packing and jointing Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Packing and jointing tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Packing and jointing Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Packing and jointing Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Packing and jointing Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Packing and jointing tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Packing and jointing Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Packing and jointing sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Packing and jointing tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Packing and jointing tenders.

Is EMD mandatory for all Packing and jointing tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Packing and jointing work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Packing and jointing tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Packing and jointing Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17074644
Location : kupwara , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for sqmm as per tech spec , electrode holder for arc welding 600a capacity fully insulated type as per tech spec , plastic jerrican 20 ltr capacity made from hdpe as per tech spec , hss twist drill bit set 25 pcs 1mm to 13mm in 0.5mm increments as per tech spec , wooden handle for pick axe or mattock 900mm lock as per tech spec att , portable petrol chain saw guide bar 22 inch or 550mm as per tech spec att , replacemenent gude bar for chain saw 22 inch or 56 cm cutting length as per tech spec att , hand saw 16 inch or 400mm or 20 inch or 500mm blade length as per tech spec att , aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per is 5706 of 1993. , paraquat dichloride 24 percentage sl non selective contact herbicide for weed control packing of 5 ltr pack as per tech spec , felling axe 1.0 kg nominal head weight as per tech spec att , felling axe 3.0 kg nominal head weight as per tech spec att , splitting maul or axe 5.0 kg head weight as per tech spec att , knapsack sprayer 15 litr capacity manually operated piston pump type as per tech spec , long handle sickel for tree branch or lopping or pruning blade length 300-350mm as per tech spec , telescopic tree pruner 1.8m to 3.0m extendable length as per tech spec , hand held regar tying tool or twister for 16 swg and 18 swg annealed binding wire as peer tech spec , telescopic ladder 20 ft extended height made from aluminium alloy as per tech spec att , pp nylon rope 24mm of 100 mtr long high strength light weight 3 strand twisted synthetic rope as per tech spec , hacksaw blade double ended, 300mm or 12 inch nominal length flexible grade for hand hacksaw frame as per tech spec , portable drill machine heavy duty,13mm chuck capacity, 650w min power input as per tech spec , barbed wire cutter or fencing plier 10 inch or 250mm, heavy duty combination type as per tech spec , cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles , water leveling tube should be made of heavy duty, crystal clear flexible pvc as per tech spec , fawada of size 150 x 275mm made of high tempered iron mild steel as per tech spec , brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tecch spec ,, tools, hand gloves leather of weight 500gm conforming to iso 21420 of 2020 of 1991 as per tech spec, multipurpose non-slip reusable gloves made of premium grade natural latex or synthetic nitrile rubber as per is-4770 of 1991 as per tech spec, shovel square conforming to is 274 part-1 and 2 of 1981 reaffirmed 2003 nose 14 gauge tata high carbon steel as per tech spec, brick trowel steel of professional grade with a blade length of 305 mm precision- forged from a single piece of high carbon steel as per tech spec, measuring tape of length 5m of 19mm width made of steel as per tech spec, measuring tape of length 30m made of steel as per tech spec, heavy duty 18 inch bolt cutter as per tech spec, collapsible y joint 10 ft long fabricated from ms tube as per tech spec att, collapsible y joint 12 ft long fabricated from ms tube as per tech spec att, ratchat spanner single socket 14mm combination type with 75 teeth ratchet mechanism for 5 deg swing arc as per tech spec, ratchat spanner single socket 13mm chrome vanadium steel 72 teeth ratchet, 12-point socket end as per tech spec, ratchat spanner single socket 12mm combination type chrome vanadium steel as per tech spec, iron cutter heavy duty bosch or equivalent as per tech spec att, abrasive cut off wheel 4 inch dia for angle grinder as per tech spec, abrasive cut off wheel 14 inch dia for chop saw 355mmx3.0mmx25.4mm bore as per tech spec, single piece aluminium ladder made from aluminium alloy 63400-wp as per tech spec att, aluminimum straight edge for floor plastering 50mm square 2mm thick and 1800mm long as per tech spec, portable arc welding machine as per tech spec, welding rod swr-10 size 3.15x350mm conforming to is 814 of 2004 as per tech spec, welding machine earthing cable single core flexible copper conductor 70 sqmm as per tech spec, electrode holder for arc welding 600a capacity fully insulated type as per tech spec, plastic jerrican 20 ltr capacity made from hdpe as per tech spec, hss twist drill bit set 25 pcs 1mm to 13mm in 0.5mm increments as per tech spec, wooden handle for pick axe or mattock 900mm lock as per tech spec att, portable petrol chain saw guide bar 22 inch or 550mm as per tech spec att, replacemenent gude bar for chain saw 22 inch or 56 cm cutting length as per tech spec att, hand saw 16 inch or 400mm or 20 inch or 500mm blade length as per tech spec att, aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per is 5706 of 1993., paraquat dichloride 24 percentage sl non selective contact herbicide for weed control packing of 5 ltr pack as per tech spec, felling axe 1.0 kg nominal head weight as per tech spec att, felling axe 3.0 kg nominal head weight as per tech spec att, splitting maul or axe 5.0 kg head weight as per tech spec att, knapsack sprayer 15 litr capacity manually operated piston pump type as per tech spec, long handle sickel for tree branch or lopping or pruning blade length 300-350mm as per tech spec, telescopic tree pruner 1.8m to 3.0m extendable length as per tech spec, hand held regar tying tool or twister for 16 swg and 18 swg annealed binding wire as peer tech spec, telescopic ladder 20 ft extended height made from aluminium alloy as per tech spec att, pp nylon rope 24mm of 100 mtr long high strength light weight 3 strand twisted synthetic rope as per tech spec, hacksaw blade double ended, 300mm or 12 inch nominal length flexible grade for hand hacksaw frame as per tech spec, portable drill machine heavy duty,13mm chuck capacity, 650w min power input as per tech spec, barbed wire cutter or fencing plier 10 inch or 250mm, heavy duty combination type as per tech spec, cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles, water leveling tube should be made of heavy duty, crystal clear flexible pvc as per tech spec, fawada of size 150 x 275mm made of high tempered iron mild steel as per tech spec, brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tecch spec, cross cut saw 8 ft 2400mm long two man as per tech spec
Agency / Dept :
indian army
Due Date :
Sep 23, 2026 (20 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16928669
Location : sonipat , haryana
LIVE TENDER
tender for purchase of packing and jointing make champion spitmaan, .
Agency / Dept :
haryana state federation of cooperative sugar mills limited
Due Date :
Sep 05, 2026 (2 days left)
Tender Value :
3L
View Documents
T18 Ref No : 16993630
Location : bagpat , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for hp metalic steam , low pressure 3 mm , low pressure 1.5 mm , asbestos tape size 6 mm x 2 inch , graphited gland packing size 0.25 inch champion make spitman , graphited gland packing size 10 mm champion make spitman , graphited gland packing size 0.50 inch champion make spitman , graphited gland packing size 16 mm champion make spitman , graphited gland packing size 0.75 inch champion make spitman , graphited gland packing size 22 mm champion make spitman , asbestos rope size 6 mm style 1000 spitmaan make , asbestos rope size 16 mm style 1000 spitmaan make , asbestos rope size 10 mm style 1000 spitmaan make , asbestos white dry rope size 12 mm style 1000 spitmaan make , asbestos white dry rope size 25 mm style 1000 spitmaan make, packing and jointing, hp metalic steam joint champion make spitman style 54 size 3mm, low pressure steam joint non metalic spitman style 20 size 3 mm, low pressure steam joint non metalic spitman style 20 size 1.5 mm, asbestos tape size 6 mm x 2 inch, graphited gland packing size 0.25 inch champion make spitman, graphited gland packing size 10 mm champion make spitman, graphited gland packing size 0.50 inch champion make spitman, graphited gland packing size 16 mm champion make spitman, graphited gland packing size 0.75 inch champion make spitman, graphited gland packing size 22 mm champion make spitman, asbestos rope size 6 mm style 1000 spitmaan make, asbestos rope size 16 mm style 1000 spitmaan make, asbestos rope size 10 mm style 1000 spitmaan make, asbestos white dry rope size 12 mm style 1000 spitmaan make, asbestos white dry rope size 25 mm style 1000 spitmaan make
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 07, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16811750
Location : auraiya , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for item no.1 , item no.2 , item no.3 , item no.4 , item no.5 , item no.6 , item no.7 , item no.8 , item no.9 , item no.10 , item no.11 , item no.12 , item no.13 , item no.14 , item no.15 , item no.16 , item no.17 , item no.18 , item no.19 , item no.20 , item no.21 , item no.22 , item no.23 , item no.24 , item no.25 , item no.26 , item no.27 , item no.28 , item no.29 , item no.30 , item no.31 , item no.32 , item no.33 , item no.34 , item no.35 , item no.36 , item no.37 , item no.38 , item no.39 , item no.40 , item no.41 , item no.42 , item no.43 , item no.44 , item no.45 , item no.46 , item no.47 , item no.48 , item no.49 , item no.50 , item no.51 , item no.52 , item no.53 , item no.54 , item no.55 , item no.56 , item no.57 , item no.58 , item no.59 , item no.60 , item no.61 , item no.62 , item no.63 , item no.64 , item no.65 , item no.66 , item no.67 , item no.68 , item no.69 , item no.70 , item no.71 , item no.72 , item no.73 , item no.74 , item no.75 , item no.76 , item no.77 , item no.78 , item no.79 , item no.80 , item no.81 , item no.82, procurement of general consumables, markin cloth, cotton waste, industrial grade threaded cotton waste, gland packing ptfe braided non metallic size 8 mm sq, gland packing sqaure crossection 14mm, tafelone tape i/2inch x15 mtr, neoprene rubber sheet gasket of isq.mtr of size 3.0mm thk., sheet ptfe packing size 600 x 600 x1.0mm thick, ptfe teflon sheets of size 300 x 300 x0.5mm, spitmaan ptfe/teflon sheet 2mm 1000mm x 1000mm, spitmaan ptfe/teflon sheet 5mm 1000mm x 1000mm, scotch brite 6inwidth coarse, brush condenser tube type cd nylon wire size 5/8inch x 6inch length, brush condenser tube type cn nylon wire size 3/8inch x 6inch length, tarpaulin canvas 36 x 18 ft, emry medium roll 25x50 mtr, cloth emry fine roll 25x50 mtr, wire brush brass, ring o neoprene cords as per bss 2752 dia 2.0 mm, ring o neoprene cords as per bss 2752 dia 3.0 mm, cord o ring neoprene rubber 6.0mm, cord o ring neoprene rubber 8.0mm, cord o ring neoprene rubber 8.5mm, cord o ring viton rubber 7.5mm, sheet gskt non asbsts sty af 159 thk 1mm, sheet gskt non asbsts sty af 154 thk 2mm, sheet gskt non asbsts sty af 154 thk 3mm, sheet gskt non asbs sty af 159 thk 0.5mm, sheet gskt non asbsts sty af 154 thk 5mm, hand glove cotton, hand gloves nitrile, plastic crate crate 35 od300lx210bx160h, corrosion protect spray crc 5 56 400ml, rustolene 5ltr tin, rustlic 631, spray belt dressing oks 2901, anabond 666, gasket jointing comp hylomer, loctite 406, loctite 638, loctite threaded sealant hydraulic 542, tube megic metal f/ferrous metal repairs, anti seize comp hot thread hvy duty 1kg, molykote compound 111, molykote supergliss spary 400 ml, m seal 1 kg pkt, loctite 577, hylomer german 100 grms tube pl 32/m, loctite superflex 596 rtv silicone 300ml, tube ink blue matching 20ml, remover paint 250ml, remover paint aersol model 81716 make loctite 18 oz, lapping compound 400gm carborandum fine, washing powder, cleaner skc i magnaflux, developer skd s2 magnaflux, penetrant skl wp magnaflux, quik fix super glue 4ml, cleaner degreaser spray oks 2601, blade hacksaw 12x1/2in hss, ss shim 0.05x500mm, shim ss 304 0.10mm, shim ss 304 0.20mm, shim ss 304 0.50mm, shim sheet ss304 1mm, shims ready cut ss 304 2.00mm model 7, tape measuring steel 30mtr, tape measuring 5m, buffing wheel aper ss 4in, lead wire size 1.0 mm dia, lead wire size 2.0 mm dia, wire lead 0point3mm, wire lead 0point5mm, shim cutter 12inch, batt alkaline 1.5v pencil type aa, brush wire ss, tape al w/adhesive 2inx20m, spider swq 280 180, pump hand operated barrel 220ltr, vice bench 6in, vice bench 8in, cutting wheel 100x4x12.7mm
Agency / Dept :
gail india limited gas authority of india ltd
Due Date :
Sep 07, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16856725
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for f254 25 tlc aluminium sheet , toluene 1 ltr , rifluoroacetic acid for synthesis 500 ml , tri sodium citrate dihydrate 500 gm , tris free base 500 gm , triton x 100 50 ml , tween 20 500 ml , victoria blue b 25 gm , a naphthylamine solution 100 ml , silver nitrate for analysis 25 gm , o 2 3 4 5 6 pentafluorobenzylhydroxylamine hydrochloride 1 gm , paraformaldehyde d2 1 gm , dichloromethane for chromatography 1 ltr , formaldehyde standard certified reference material 100 ml , acetic acid glacial 99 100 500 ml , 1 8 diazafluoren 9 one 250 mg , 2 phenoxyethanol 1 ltr , epa 531.1 carbamate mix 1 ml , epa 8270 organophosphorus pesticides mix 1 ml , acetonitrile ms 1 ltr , cell culture freezing medium 50 ml , collagenase type , copperii phthalocyanine 200 mg , epa clp organochlorine pesticide mix 1 pkg , cyclohexane ecd fid 1 ltr , dapi fluoropure grade 10 mg , generuler 100bp dna ladder 50 g , ecori 5000 units , hipura dh5 competent cells 10 r , ethyl acetate ms 1 ltr , wash solution concentrate ws 250 ml , n hexane ms 2.5 ltr , liquied nitrogen 35 ltr , polyvinyl acetate 500 gm , psa spe bulk packing 100 gm , trifluoroacetic acid for synthesis 500 ml , low form beaker with spout 50 ml , low form beaker withspout 100 ml , low form beaker with spout 250 ml , low form beaker with spout 500 ml , low form beaker with spout 1000 ml , microscope glass slides plain ground edges 76x26x1 mm per pkt of 50 , cover glass square 22x22 mm per pkt of 100 , reagent bottles narrow mouth with screw cap 250 ml , reagent bottles narrow mouth with screw cap 500 ml , reagent bottles narrow mouth with screw cap amber 250 ml , reagent bottles narrow mouth with screw cap amber 500 ml , dropping bottles with glass dropper silicone teat 125 ml , round bottom flask narrow mouth short neck with i _c joint 25 ml , round bottom flask narrow mouth short neck with i _c joint 50 ml , round bottom flask narrow mouth short neck with i _c joint 100 ml , serological pipettes classa with individual calibration certificate 1 ml , serological pipettes classa with individual calibration certificate 2 ml , serological pipettes class a with individual calibration certificate 5 ml , test tubes without rim 13 ml , 2 ml hplc certified clear vials clousers pack size 100 pack size 100 , 20 ml headspace gc vials closure pack size 100 , 2 ml hplc treated vials closures pack size 100 , pes membrane diameter 47mm pore , pes membrane diameter 47mm , tissue culture plate sterile 96well ps packing 50 , anode buffer container abc for 3500 _seqstudio flex pack of 4 , big spoon spatula 9 inch , blotting paper pack of 500 , butter paper , capillary tube pack of 100 , cathode buffer container cbc for 3500 _seqstudio flex pack of 4 , spinwin ultra clean tube 50ml conical bottom pp _hdpe packing 500 , universal combi rack pp packing 4 , conical centrifuge tube rack rpp full rack packing 4 , draining tray pp 400x300x100mm packing 6 , face mask non sterile pack of 50 , filter paper gr 1 12.5cm 100 _pk , forceps ptfe coated blunt end 6 , nitrile gloves powder free large packing 100 , kimwipes disposable wipes , spinwin cliklok amber micro centrifuge tube 1.5ml packing 500 , spinwin cliklok amber micro centrifuge tube 2.0ml packing 500 , spinwin cliklok micro centrifuge tube 2.0ml packing 500 , micro tips 10ul ref packing 1000 , micro tips 200ul packing 1000 ,, chemical glasssware and consumables, chemicals, glassware, consumable
Agency / Dept :
uttar pradesh state institute of forensic sciences UPSIFS
Due Date :
Sep 07, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16953018
Location : vemula , andhra pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for bitumenlayingwork2 , kerbstonelayingwork1 , tailingexcavationwork1 , borrowearthsoilwork3 , removinghdpeliningwork1 , dismantlingstonepitching1 , backfillingoftailing1 , laboratorytestwork15 , humepipework1 , humepipework2 , humepipework3 , humepipework4 , humepipework5 , humepipework6 , earthworkfillingforbund1 , stonepitchingwork5 , brickwork1 , brickwork2 , plasteringwork1 , plasteringwork2 , plasteringwork3 , paitingwork1 , paitingwork2 , paitingwork3 , handrailingwork3 , ccforflooringwork1 , plasteringwork4 , glasssstripswork1 , cementpunning1 , aluminumwork1 , shutterworks1 , glasspaneswork1 , siliconsealantwork1 , doorworks1 , mechanicalinstallationpumps1 , mechanicalinstallationpipes1 , mechanicalinstallationpipes2 , mechanicalinstallationpipes3 , electricallinstallation5 , mechanicalerections1 , disposalareappep1 , slimedisposalareappep1 , slimedisposalareappep2 , constructionofelectricalfacilityworklumpsum1 , panelneartaillingpond , automaticpowerfactorcorrectionpanel1 , batterychargerdcboard , lcsmushroomheadstay1 , lcsmushroomheadstay2 , lcsmushroomheadstay3 , distributiontransformer1 , dieselgeneratorset1 , dieselgeneratorfounation1 , ltbusduct1 , htswitchgearincomingpanel1 , htswitchgearincomingpanel2 , mainlightingdistributionboard1 , sublightingdistributionboard , highmastlighting1 , highmastlighting2 , lighteningfixture1 , ltpowercables1 , htpowercables1 , htpowercables2 , ltcontrolcables , junctionboxes1 , earthinglightningitems1 , aircondition1 ,, construction of 4th stage tailing pond, stripping and clearing the site of jungles, bushes, shrubs, wood etc., uprooting of rank vegetation, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level, removal of undesirable materials etc. including removal and disposal of debris at suitable locations with all leads and lifts, as decided by the engineer-in-charge., felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 30 cm girth upto and including 60 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 60 cm girth upto and including 120 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 120 cm girth upto and including 240 cm girth, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond.hard rock (blasting prohibited), earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. ordinary rock, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. hard rock (blasting prohibited), earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. hard rock (blasting prohibited), supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in bed later - 1 in layers not exceeding 250 mm above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to achieve required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge., supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying and transporting clay of specified quality and property (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and laying the same over random fill on upstream side of embankment in layers not exceeding 150 mm measured loose in proper profile, watering of each layer in stipulated manner to various heights and compacting each layer by mechanical means to achieve required degree of compaction as per specification and / or direction of the engineer-in-charge, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted thickness will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over clay lining on upstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note - payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over random fill on downstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting, spreading and compacting sand (average 100 mm thick) over stone pitching on upstream side of dam with all lead and lift including all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting and laying 1500 micron thick high density polyethelene (hdpe) sheet (textured on both sides) as lining over sand cushion layer on upstream side of dam, laid in position by qualified and skilled installer certified by the manufacturer and approved by the engineer-in-charge, with all lead and lift including sealing of joints (hot wedge single and dual track seaming and / or extrusion fillet seaming method or any other specialized method e.g. robotic two stitch welding etc.) of new sheets and sealing of new lining sheet with existing lining sheet with an overlap of approximately 1.0m, anchoring the new lining sheet on top of new embankment, maintaining quality control, conducting tests as per requirement of the specification, all complete as per drawing, provisions of specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of hdpe lining sheet. overlapping area, wastage etc. shall not be payable., supplying, transporting, laying and compacting uniformly graded stone aggregate filters within new embankment at all levels,incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting, laying and compacting uniformly graded coarse sand filters within new embankment at all levels incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge. (sand shall conform to is383). laying and compacting rock-fill toe dam on downstream side of embankment with following materials at all levels, all complete as per drawing, specification and direction of the engineer-in-charge., with rocks arranged by the contractor at his own cost (rate to include supply and transport also), earth work in back-filling including watering, ramming and compaction at all elevation around pipe support foundations, drain trenches etc. as per specifications and drawings and as directed by the engineer-in-charge with selected soils obtained from stacks under item no. 6 above for any lead within acquired area of tailing pond and dam. (filling shall be done in layers not exceeding 250 mm in loose thickness and watered as necessary. each layer of filling to be compacted to acheive a dry density of not less than 95% of the proctor density)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) in diversion drain and at outfall locations with interstices between adjacent stones filled-in with stones of proper size well-driven in order to ensure tight packing and complete filling of all interstices so that no chip can be removed by hand, with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., earthwork in filling using earth obtained from item nos. 3, 4, 5 and 6 above in construction of embankment of access roads (total four nos. access roads) connecting top of new tailing pond embankment in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) on sides of embankments of access roads with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying site machine batched plain cement concrete of 136 nominal mix (1 cement 3 coarse sand 6 graded stone aggregate with 20 mm and down aggregates) below foundations, walls, drains, pits etc. including mixing, transporting, placing in position, compacting to proper thickness and level, curirg, maintaining proper quality control including cost of admixtures in recommended proportions as per is 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability but excluding cost of shuttering work, all complete as per specifications, drawings and direction of the engineer-in-charge and including cost of form work., extra over item 30 bove for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. note (i) cost of shuttering and reinforcement shall be paid in respective items. (note the bidder has to quote only extra cost above the item 30 in the line item of 31, for example- if the cost of item 30 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 31 of the price part), providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 32 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 32 in the line item of 34, for example- if the cost of item 32 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 34 of the price part), extra over item 33 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying.concrete of m30 grade with minimum cement content of 350 kg/cum. (note the bidder has to quote only extra cost above the item 33 in the line item of 35, for example- if the cost of item 33 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 35 of the price part), providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 36 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 36 in the line item of 38, for example- if the cost of item 36 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 38 of the price part), extra over item 37 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m30 grade with minimum cement content of 350 kg/cum (note the bidder has to quote only extra cost above the item 37 in the line item of 39, for example- if the cost of item 37 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 39 of the price part) (another note-2 for item nos. 23, 24, 25 and 26 (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid through respective items.(iii) rendering of treatment at construction joint shall be carried out under supervision of manufacturer, cost of which shall be included in rate of these items. (iv) design of pipe support foundations, high mast foundations, miscellaneous pump foundations, transformer and other equipment foundations shall be under scope of the contractor. (v) contractor shall prepare design drawings and bar bending schedules for all rcc structures and submit the same to ucil for approval., supplying and laying precast reinforced cement concrete elements at any level using 20 mm and down graded crushed stones as coarse aggregate as per approved design mix including supply of materials / labour / tools and tackles etc. as required, formwork, mixing, laying, compacting to proper size and thickness, curing, storing, handling, transporting, erection without damage etc. but excluding cost of shuttering and reinforcement, all complete as per drawings, specifications and direction of the engineer-in-charge. concrete of m25 grade with minimum cement content of 330 kg/cum note (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid in respective items., add for consumption of extra / excess cement, if required, in design mix concrete (item no. 23 to 26 above) over the specified minimum cement content in respective items mentioned above. note i) requirement of extra cement with respect to the minimum cement content mentioned against respective items of approved design mix of concrete to achieve the characteristic strength for each design mix must be approved by engineer-in-charge during mix design stage based on laboratory test results which must also be approved by the engineer-in-charge..(ii) payment shall be on the basis of actual quantity of cement used in mix concrete executed., supplying, installing, dismantling and removing shuttering for foundations and substructures upto plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all complete as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, installing, dismantling and removing shuttering for superstructures above plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all completer as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in substructure upto plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in superstructure above plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, fabricating and installing mild steel anchor bolts / holding down bolts, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures including lugs in cement concrete, including necessary templates for keeping them in position and with welding, bending to the required shape, if necessary and prime coat and final painting whereever necessary/applicable, cost of scaffolding, as required, at all leads and lifts, storing, handling, transporting, erection without damage, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge. note i) all materials shall be from m/s sail, iisco, rinl and tata steel from their own plants rolled from virgin material only. ii) welding weights, connections, bolts and nuts etc. shall not be measured for payment but the cost of which shall be deemed to have been included in the quoted rate. iii) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers and also tests from third party, if required, to be arranged at no extra cost. iv) all holes will be made by drilling only. gas cutting of holes will not be permitted. v) electrodes manufactured by m/s advani oerlikon, esab india, indian oxygen and dandh secheron only shall be used., taking delivery from ucil, handling, transporting and installing in cement concrete at all elevations anchor bolts, anchors, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures, cost of scaffolding, as required, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge.. note i) the fabricated embedded items including lugs etc. shall be supplied by ucil., supplying, fabricating and installing structural steel work conforming to is 2062 (grade e250, quality b0) in all kinds of work for pipe and cable supports at top of dam/embankment at all elevations including straightening of raw steel (if required), cutting, making edge preparation, making connections at fabrication yard by welding / bolting, hoisting, fixing in position by welding / bolting, cleaning and preparation of all steel, storing, loading, transportation, unloading, delivery at erection site, maintening proper quality control, surface preparation for painting, erection, alignment and connections of all structures true to line, level, plumb and dimension including rectification, if any, splicing, applying a primer coat of approved make before erection and two coats of final paint of approved make after erection and final alignment, preparation of design d
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
172Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16998183
Location : mumbai , maharashtra
LIVE TENDER
tender for sealing materials (sealing cord) for met, sealing materials (sealing cord) for metallic threaded joints in contact with 1st,2nd and3rd fa mily gases and hot water non-hardening jointing compounds conforming to bs specification en 751-2- 199 7 class arp compound with dvgw/csa/nsf/ansi-61/ as-nzs-4020 approval. material required in packing o f 150 meters spoolmake: loctite55 or similar - warranty period: 30 months after the date of delivery
Agency / Dept :
central railway CR
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17030780
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
corrigendum tender for excavating in trenchs not exceeding , material and labour pcc in foundations , material and labour rr stone masonary , hand packing any thickness at back , supply and fixing pvc swr pipes , material and labour raised pointing rr , material and labour for pcc, provision to protection wall tower at ops location dharati under ge af jammu, excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 sqm on plan in soft disintigrated rock and getting out all as spd., material and labour pcc in foundations filling and mass concrete type b2 1 ratio 2 ratio 4 using 40 mm graded stone aggregate, material and labour rr stone masonary uncoursed well bonded bedded and solidly hearted build in cm 1 ratio 6 of any wall stone work all as specified., hand packing any thickness at back of walls over arches etc and raising or lowering to the required level all as specified., supply and fixing pvc swr pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls as in weep holes all as specified., material and labour raised pointing rr masonary in cm 1 ratio 4 all as specified., material and labour for pcc 1 ratio 2 ratio 4 type b1 20 mm graded stone aggregate as in coping benching etc incl necessary fome work etc comlpete all as specified and as directed.
Agency / Dept :
indian army
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17032977
Location : dhemaji , assam
Source : GEM Tenders
LIVE TENDER
tender for lv7 tata safari 287042103705 brake disc , lv7 tata safari 285933800103 bearing assy front , lv7 stln 4320-004125 pump hydraulic ram , lv7 stln x 2705100 hind c s rear end oil seal , lv7 tata 3124111111 universal joint flange , lv7 hh 2805-001582 inlet valve , lv7 hh 14721-gf 6-020 exhaust valve , lv7 hh 12209-gb4-681 valve sterm seal , lv7 hh 1006-020-003 valve guide remover , lv7 hh 31916-kst-920a spark plug , lv7 hh 5330-026514 engine gasket packing kit , lv7 tata safari 268426803401 gear liver kit , lv7 storm 540788700143 assy hood balancer , lv7 stln b-9100104 speed sensor , lv7 maruti 2940-003791 brake pipe gypsy , lv7 stln x-7803900 regulator assy lh , lv7 hh 2520-012902 speedometer , lv7 fbt a4000900852 fule filter , lv7 tata 540872300104 door handle outer rh , lv7 tata safari 285933750101 shaft and joint assy rh, lv7/tata safari 287042103705 brake disc, lv7/tata safari 285933800103 bearing assy front, lv7/stln 4320-004125 pump hydraulic ram, lv7/stln x 2705100 hind c/s rear end oil seal, lv7/tata 3124111111 universal joint flange, lv7/hh 2805-001582 inlet valve, lv7/hh 14721-gf 6-020 exhaust valve, lv7/hh 12209-gb4-681 valve sterm seal, lv7/hh 1006-020-003 valve guide remover, lv7/hh 31916-kst-920a spark plug, lv7/hh 5330-026514 engine gasket packing kit, lv7/tata safari 268426803401 gear liver kit, lv7/storm 540788700143 assy hood balancer, lv7/stln b-9100104 speed sensor, lv7/maruti 2940-003791 brake pipe gypsy, lv7/stln x-7803900 regulator assy lh, lv7/hh 2520-012902 speedometer, lv7/fbt a4000900852 fule filter, lv7/ tata 540872300104 door handle outer rh, lv7/tata safari 285933750101 shaft and joint assy rh
Agency / Dept :
indian army
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16977320
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
LIVE TENDER
tender for ea6010b-521875-01 , ea6010b-521863-01 , ea6010b- 518460-80 , ea6010b-518436-02 , ea6010b-545597-01 , ea6010b-521930-80 , ea6010b-1761974-80 , ea6010b- 73085 , ea6010b-517774-06 , ea6010b-2210942-36 , ea6010b-542392-02 , ea6010b-538535-01 , ea6010b- 521933-01 , ea6010b-41202378 , ea6010b-41201974 , ea6010b-41201180 , ea6010b-3284000001 , ea6010b- 22340639 , ea3983b-572932-80 , ea6010b-56063801 , ea6010b-538539-04 , ea6010b-56678805 , ea6010b- 56529501 , ea6010b-16019 , ea6010b-56013401 , ea6010b-563004-01 , ea6010b-536704-02 , ea3983b- 579262-01 , ea3983b-he-285n , ea6010b-527981-85 , ea6010b-414726-83 , ea6010b-56346401 , ea6010b- 22340623 , ea6010b-22340637 , ea6010b-54805149 , ea6010b-54932501 , ea6010b-373017-4098 , ea6010b- 223610-07 , ea3983b-37535 , ea6010b-223403-16 , ea6010b-526543-80 , ea3983b-565772-02 , ea6010b- 539137-83 , ea6010b-52112711 , ea6010b-54874708 , ea3983b-566357-01 , ea6010b-56447801 , ea6010b- 5350046201 , ea6010b-56678815 , ea6010b-22310735 , ea6010b-56210903 , ea6010b-560763-01 , ea6010b- 56209502 , ea6010b-22340361 , ea3983b-580410-01 , ea6010b-56211002 , ea6010b-526775-80 , ea6010b- 54586903 , ea6010b-223412138 , ea6010b-26024702 , ea6010b-56066180 , ea6010b-22341246 , ea6010b- 26010405 , ea6010b-22340632 , ea6010b-22341223 , ea6010b-56299501 , ea6010b-56678821 , ea6010b- 524330-03 , ea6010b-373017-4000 , ea3983b-73547 , ea3983b-544060-01 , ea6010b-223412140 , ea6010b- 554278-02 , ea6010b-9841023008 , ea6010b-54874403 , ea6010b-39001788-07 , ea6010b-56440301 , ea6010b- 56063901 , ea6010b-57702481 , ea3983b-565894-01 , ea6010b-22171622 , ea6010b-2210938-39 , ea6010b- 518479-01 , ea6010b-526501-02 , ea6010b-223401-30 , ea6010b-8132 , ea6010b-223401-28 , ea6010b-73377 , ea6010b-538718-81 , ea6010b-69368-00 , ea6010b- 039919-00 , ea6010b-11455 , ea6010b-11522-00 , ea6010b-11905-00 , ea6010b-190609 , ea6010b-223146- 02 , ea6010b-310637-84 , ea6010b-32195 , ea6010b-323 , ea6010b-34414-00 , ea6010b-33355 , ea6010b-420843-81 , ea6010b-42151-00 , ea6010b-44201091 , ea6010b- 515423-16 , ea6010b-518341-02 , ea6010b-517774-24 , ea6010b-518463-01 , ea6010b-519602-81 , ea6010b- 527767-81 , ea6010b-535743-04 , ea6010b-53574180 , ea6010b-538574-80 , ea6010b-544060-01 , ea6010b- 62761-00 , ea6010b-65220 , ea6010b-65235-00 , ea6010b- 72245 , ea6010b-7247400 , ea6010b-73547-00 , ea6010b- 74067-00 , ea6010b-72246 , ea6010b-ls1 , ea6010b-1104 , ea6010b-12481-00 , ea6010b-14161-00 , ea6010b-14238 , ea6010b-14238-00 , ea6010b-14462 , ea6010b-1764008- 02 , ea6010b-2210941-08 , ea6010b-6924 , ea6010b- 60739 , ea6010b-44201055 , ea6010b-64100 , ea6010b- 223402-11 , ea6010b-60571 , ea6010b-7508500 , ea6010b-8821-00 , ea6010b-323-00 , ea6010b-223406-26 , ea6010b-535743-02 , ea6010b-223406-20 , ea6010b- 223521-17 , ea6010b-223406-27 , ea6010b-37166 , ea6010b-223406-14 , ea6010b-226214-43 , ea6010b- 62762 , ea6010b-529206-01 , ea6010b-223641-17 , ea6010b-7026-00 , ea6010b-223412-38 , ea6010b- 223642-36 , ea6010b-62013-00 , ea6010b-2211722-26 , ea6010b-22352117 , ea6010b-2211721-08 , ea6010b- 523615-01 , ea6010b-67477 , ea6010b-223408-09, 25valc001, seal ring, ring rectangular, axle buffer complete, deflector, wing, sleeve, flow indicator, socket for socket spanner socket wrench sleeve, gasket, screw, sleeve half, sacrificial anode, indicator lamp while ho-xb4-bvb1, gasket between mps and mesb, cip 40 400w 230v 50hz 65deg, o-ring, friction block, rectangular ring, impeller with long shaft, fuse 10x38 4a, bowl spindle, camp nut, frame foot, heating element- 1-1 kw, lifting eye, flat belt, ball bearing, cover, raw plate, flat key, connecting housing, operating device, valve plug, emergency push button, spring washer, helical spring, belt pulley, labyrinth ring, splash sealing, composite spring, nozzle 1-5mm, lock ring, oil pump, level ring 79 mm, friction element, gravity disc set, mechanical seal 16 nitrile, self-align roller bearing, field gasket, operating slide, inlet and outlet pipe, valve cone, socket 19-05 mm 3-4inch, feed pump8540 lph, key woodruff, spring, bearing ball 6205, round nut, seal ring 444202330, packing, washer, friction pad, lock gravity ring, pin, bearing no 2304mv q335, friction pad with screws, inch o inch ring, worm wheel with pin, gravity disc 87, handle, pipe inlet, pad friction with screw, ring joint rulen gasket, bearing w/o bushing, flexible coupling complete, interactive washer, socket 15 mm 1-2inch, pin slotted, socket 21 mm 1-2inch, level switch, o ring, single row rigid/ball bearing, inch o inch ring rub3034-71 dia 4-35x39-7dn 260124-14238, plug for brake with sleeve, connecting hose, screw lock, plate elastic, disc gravity 98mm dia, wear gasket, sight glass, buffer, snap ring, wheel pump short shaft, nut round km-10
Agency / Dept :
indian navy
Due Date :
Sep 16, 2026 (13 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Packing And Jointing. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Packing And Jointing sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Packing And Jointing Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Packing And Jointing, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Packing And Jointing Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Packing And Jointing Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Packing And Jointing.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Packing And Jointing depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Packing And Jointing Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Packing And Jointing bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Packing And Jointing. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Packing And Jointing, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Packing And Jointing, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Packing And Jointing?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Packing And Jointing tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Packing And Jointing?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Packing And Jointing, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Packing And Jointing is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All