sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

57Latest Induction coil Tenders List

Latest Induction coil Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Induction coil tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Induction coil tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Induction coil Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Induction coil tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Induction coil Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Induction coil Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Induction coil Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Induction coil tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Induction coil Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Induction coil sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Induction coil tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Induction coil tenders.

Is EMD mandatory for all Induction coil tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Induction coil work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Induction coil tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Induction coil Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17070469
Location : krishnagar , west bengal
Source : GEM Tenders
NEW TENDER
tender for simulator for cnc technology , universal weld measuring gauge , auto darkening helmet with desirable specification , pedestal grinder fitted with coarse and medium grain size grinding wheels dia 300 mm with desirable specification , work bench , oxy acetylene gas cutting blow pipe , fire buckets with stand , portable abrasive cut off machine , suitable gas cutting table , welding simulators for smaw gtaw gmaw , water cooled induction brazing machine , plastic machine with hot air gun uses of pepp and pvc sheet or pipe , swaging and flooring tool kit 45 degree tubing , die penetrant testing kit , anti spatter spray can desirable , gmaw torch nozzle tip , tig torch ceramic nozzle , tungsten electrode , copper filler wire , flux for brass , flux for copper , steel tape , steel measuring scale , marking knife , try square , bevel square , carpenter marking gauge , carpenter mortiser gauge , metal smoothing plane , firmer chisel , contraction measuring scale , rip saw , ball pein hammer , country drill with bow ball bearing type , breast drill , snip straight , oil cans , carpenter vice , saw sharpening vice , blower , grease gun , portable circular saw machine , portable planning machine , portable jig saw machine , portable router machine , set of turning tools for above lathe machine , drills chuck , portable disc sander , electric heater , universal wood working machine , small type compressor with spray painting system , ohm meter , digital multi meter , a c voltmeter , milli voltmeter , ammeter mc analog , digital wattmeter , power factor meter digital , magnetic flux meter , lux meter , megger , wheat stone bridge with galvanometer and battery , phase sequence indicator , temperature controlled soldering iron , current transformer , potential transformer , solar panel with battery , d c compound generator with control panel including fitted rheostat voltmeter ammeter and breaker , ac phase wound slip ring motor with starter switch , universal motor with starter switch universal motor along with control panel , single phase transformer core type air cooled , three phase transformer shell type oil cooled with delta star , used dc generators series shunt and compound type for overhauling practice , a c series type motor , manual coil winding machine , fully automatic ceiling fan stator winding machine , stepper motor with digital , single phase shaded pole induction motor , smart meter , ev charger , ev charger home , hss taper shank twist drills (short series) (q3), workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
73.76L
View Documents
T18 Ref No : 17074232
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
NEW TENDER
tender for , ek3330b-4100122163101100000 , ek3330b- 4100218000001101440 , ek3330b-4100518000101200021 , ek3330b-4100618000101101440 , ek3330b-41010-503- 158-218-31001 , ek3330b-4100151250021800000 , ek3330b-4101000111800001201 , ek3330b- 4101177705800000001 , ek3330b-4101177711800000001 , ek3330b-4101410200122000000 , ek3330b- 4101424000002100820 , ek3330b-4102218030502101440 , ek3330b-4102218010101101440 , ek3330b- 4102218030313101440 , ek3330b-4102218030202101440 , ek3330b-4102218030201101440 , ek3330b- 4102218030103101440 , ek3330b-4102218030102101440 , ek3330b-4102218030203101440 , ek3330b- 4102218010203101440 , ek3330b-4102218010202101440 , ek3330b-4102218031203101440 , ek3330b- 4102218031102101440 , ek3330b-4102218031003101440 , ek3330b-4102218031101101440 , ek3330b- 5100418041222400220 , ek3330b-5100800100400200000 , ek3330b-51009-083-000-091-06825 , ek3330b- 5100900100300200000 , ek3330b-5100918000001101440 , ek3330b-5101318010101101440 , ek3330b- 5101318031401101440 , ek3330b-5101318032401101440 , ek3330b-5101318032601101440 , ek3330b- 5102224031601100820 , ek3330b-5102224031701100820 , ek3330b-5102224031401100820 , ek3330b- 5102224031301100820 , ek3330b-5102224030301100820 , ek3330b-5102224030401100820 , ek3330b-6281201050 , ek3330b-6332333850 , ek3330b-6332334050 , ek3330b- 6332339550 , ek3330b-6332339650 , ek3330b- 6335085450 , ek3330b-6361115850 , ek3330b-8056-71- 28-00 , ek3330b-8056-71-29-00 , ek3330b-8056-71-15-00 , ek3330b-8056-73-02-00 , ek3330b-8529830055 , ek3330b- 9940000504 , ek3330b-9990164250 , ek3330b- 9991360550 , ek3330b-5101318032101101440 , ek3330b-, 26vkpc004, gasket cover window he side, gasket cover window filter side, gasket cover top & hsg dist. block, gasket cover top & hsg manifold block, on-delay timer siemens 5-100 sec coil 24v dc 3rp15 13-1ap30, terminal connectors with din rail 35 wago 6 sq mm 282-101, selector switch salzer l&t 6a 250 v 2 p on-off, set shaft seal part no08012, jack-screw, thermo expansion valve sporlan mve-26 vc charge7-8, bearing front nu216, feed thru capacitor for 45 kw motor, bearing rear nup 216, tachogenerator hubner make, mccb merlin gerin 160 a, 4 pole ns160n 4p30640 coil 24v dc, capacitor ctr-eqv 1000f, 400v screw type, field regulator circuit elmot for 45 kw dc panel, inspection kit for wrvin255-145 28, filter element for duplex oil filter, angle valve 3-4inch npt for vent drain, core for filter drier, filter drier for main liquid line, vibration eliminator flexible for liquid line, rubber bellows for sw pump suction, impeller for sw pump, coupling pin & bush for sw pump, pressure transmitter 0 to 16 kg-cm-2, differential pressure transmitters, pressure gauge 65 dial 0 to 25 kg-cm2 for r134a, pressure gauge 65 dial -1 to 15 kg-cm2 for r134a, human machine interface hmi-display, three way valve 1-4inch, hooter 24v dc, push button red, digital output card for plc, push button epb 3110006 1no -1nc, push button epb 2110009 1no -1nc, percentage meter, temperature indicator 0 to 100, oil seperator danfoss oub 4 for 2 x 2.1 tr ref plant, evaporator pressure regulator sporlan ori t 6, fan with motor for ac unit for meat room for 2x2.1 tr ref pl, temp switch danfoss rt34-25 to 15 deg c, shaft seal placement kit part no.kxs204, core for filter drier sporian rc10098, vibration eliminator 3- 1-8inch ods, kit for power contactor of 15 kw sw pump starter, kit for power contactor of 22 kw sw pump starter, coil for power contactor of 160 kw soft starter, annual inspection kit part no. kx204-3d, metalflex coupling for comprressor for 144 tr ac plant, set of gaskets for condenser for 2 x 2.1 tr ref plant, set of gaskets for condenser for 144tr acplant for p17 class, thermostatic expansion valve for evaporator, set oilsump heat 80w 220-240v part no.08425, nrv for discharge, vibration eliminator 5-8inch ods, vibration eliminator 1-1-8inch ods, shock mounts for condensing unit, shock mount irmra akcc-400e, indicating lamp green leb type 110v ac, kit for power contactor of 160 kw soft starter, current transformer 50-5a 5va,acc ci -10p10 resin cast, main power contactor ge 25a,415v ac 3p power contactor, semi conductor fuses ge feraaz 200a,6.611 rd30-xx0315, mc mccb ge 100a s 400a, with aux contact 2no-2nc, coil for power contactor of 22 kw sw pump starter, coil for power contactor of 15 kw sw pump starter, delta contactor 415v ac with 1no-1nc coil voltage 110v ac, star contactor 415v ac with 1no-1nc coil voltage 110v ac, start push button green 1no-1nc, mc mccb ge 3pole 200a 415v ac s-2ka mc401, motor 22 kw 2 p ip56 sq cage induction 415v 50hz ci f b5, temperature switch danfoss rt107 25 to 90 deg c, oil level switch, pres transmitter danfoss mbs 3100-2211-1ac04 range 0-16 bar, magnetic level gauge-swtich for 144 tr ac plant - p17 class, set of indication lamps one of each type for lcp, lamp green 24v dc, bridge rectifier ems0011132 25a, lamp 380v ac red for lcp siemens, push button teknic 22.5 dia yellow, push button teknic 22.5 dia white, push button teknic 22.5 dia black spare, push button teknic 22.5 dia black for reset, indicating lamp teknic 22.5 dia led 230 v ac type yellow, indicating lamp teknic 22.5 dia led 230 v ac type blue, thermometer with brass shield 1-2inch bsp, pipe, press switch clutch oil, temp switch, speed transmitter sensor, bolt banjo 1-1-2inch bsp, pre filter element set, fine filter element set, zink plugs for sea water coolers, drier gel molecular sleeve, tong tester, elbow socket welding, bolt hex std, circlip external f55, push button epb 5110007 1no-1nc, under voltage relay 3 ph minilec vct-d2
Agency / Dept :
indian navy
Due Date :
Sep 23, 2026 (20 days left)
Tender Value :
5.04Cr
View Documents
T18 Ref No : 17075562
Location : cachar , assam
Source : GEM Tenders
NEW TENDER
tender for providing operation and maintenance services of electrical and mechanical installations for 1st year , providing maintenance services and operation of electrical and mechanical installations for 2nd year , providing operation and maintenance services of glf system for 1st year , providing operation and maintenance services of glf system for 2nd year , deploying 03 nos high skilled computer operator as per scope of work given in special conditions of contract for 1st year , complete overhuling and repairing of 3.5 hp capacity water pump , complete re- winding of burnt out stator coils of 3 ph. 3.5 hp induction motor , complete overhuling and repairing of 7.5 hp capacity water pump , complete re-winding of burnt out stator coils of 3 ph. 7.5 hp induction motor , cleaning and painting of street light tubular pole including light fitting bracket and all other associated accessories of height above 5 mtr upto 12 mtr , cleaning and painting of street light tubular pole including light fitting bracket and all other associated accessories of height upto 05 mtr , painting of collar of street light pole , painting of glf fittings mirl including base plate , painting of outdoor feeder panel or lt panel , replacement of damage street light loop-in loop- out box , carrying out of dsr item works as scheduled in dsr -2025, job contract for e and m installations at terminal building operational area and allied works, providing operation and maintenance services of electrical & mechanical installations i.e power supply system, electrical installation of terminal building, operation area, car parking area, street light, civil office, covering the scope of operation, repairs & maintenance, attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 01 no high skilled, 05 nos skilled, 01 no. semi-skilled and 02 nos unskilled manpowers (including reliever) as per scope of work given in additional terms of contract to ensure round the clock operation by providing adequate manpower (i.e. in three shifts basis, each shift of 8 hours) on all days including sundays & national holidays as per direction of eic. a) for 1st year, providing operation and maintenance services of electrical & mechanical installations i.e power supply system, electrical installation of terminal building, operation area, car parking area, street light, civil office, covering the scope of operation, repairs & maintenance, attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 01 no high skilled, 05 nos skilled, 01 no. semi-skilled and 02 nos unskilled manpowers (including reliever) as per scope of work given in additional terms of contract to ensure round the clock operation by providing adequate manpower (i.e. in three shifts basis, each shift of 8 hours) on all days including sundays & national holidays as per direction of eic. b) for 2nd year, providing operation and maintenance services of glf systems at operational area (comprising of mirl/ taxi apron /guidance illuminated signage /afl cables etc.) covering the scope of operation, repairs & maintenance, attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 02 nos skilled, 01 no semi-skilled and 02 nos unskilled manpowers (including reliever) as per scope of work given in additional terms of contract to ensure round the clock operation by providing adequate manpower (i.e. in three shifts basis, each shift of 8 hours) on all days including sundays & national holidays as per direction of eic. a) for 1st year, providing operation and maintenance services of glf systems at operational area (comprising of mirl/ taxi apron /guidance illuminated signage /afl cables etc.) covering the scope of operation, repairs & maintenance, attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 02 nos skilled, 01 no semi-skilled and 02 nos unskilled manpowers (including reliever) as per scope of work given in additional terms of contract to ensure round the clock operation by providing adequate manpower (i.e. in three shifts basis, each shift of 8 hours) on all days including sundays & national holidays as per direction of eic. b) for 2nd year, providing of services for preperation of various reports, maintaining the records, preparation of rate analysis, estimates, tender documents, sap billings etc along with various day to day office works by deploying 03 nos high skilled computer operator as per scope of work given in special conditions of contract on all days excluding sundays and national holidays & as per direction of eic. for 1st year, complete overhuling & repairing of 3.5 hp capacity water pump i/c replacement of defective keys, necessary lathe work, replacement of ball bearing & gland packing including replacement of bush bearing, replacement of minor hardware items and painting after dismantling from the existing location, transporation upto the workshop if necessary & reinstallation of the same, testing etc complete as required as per site condition. location - overhead refining for cft at apron area, complete re-winding of burnt out stator coils of 3 ph. 3.5 hp induction motor along with removal of the burnt out copper coil/wire and providing new super anamel coated copper with insulation and varnishing with suitable quality of varnish and replacement of minor wornout hardware items etc. as required i/c giving less credit for the burnt out copper coil. location - overhead refining for cft at apron area, complete overhuling & repairing of 7.5 hp capacity water pump i/c replacement of defective keys, necessary lathe work, replacement of ball bearing & gland packing including replacement of bush bearing, replacement of minor hardware items and painting after dismantling from the existing location, transporation upto the workshop if necessary & reinstallation of the same, testing etc complete as required as per site condition. location - water treatment plant, complete re-winding of burnt out stator coils of 3 ph. 7.5 hp induction motor along with removal of the burnt out copper coil/wire and providing new super anamel coated copper with insulation and varnishing with suitable quality of varnish and replacement of minor wornout hardware items etc. as required i/c giving less credit for the burnt out copper coil. location - water treatment plant, cleaning and painting of street light tubular pole including light fitting bracket and all other associated accessories of height above 5 mtr upto 12 mtr with one coat of red-oxide metal primer of anti-corrosive paint on rusted surface and one or more coats of enamelled paint including numbering on the pole etc as required. the pole shall be painted with obstruction color upto required height above the masonary pedestal ( 1.0 to 1.5m) as per direction of eic., cleaning and painting of street light tubular pole including light fitting bracket and all other associated accessories of height upto 05 mtr with one coat of red-oxide metal primer of anti-corrosive paint on rusted surface and one or more coats of enamelled paint including numbering on the pole etc as required. the pole shall be painted with obstruction color upto required height above the masonary pedestal ( 1.0 to 1.5m) as per direction of eic., painting of collar of street light pole with one or more coat of synthetic enamelled paint and application of red-oxide paint wherever required in bicolour ( black and yellow strip ) complete etc as required and as per direction of eic., painting of glf fittings (mirl) including base plate with one or more coats of synthetic enamelled paint of required colour as per icao standard of approved make to give an even shade including cleaning the surface and numbering of the same etc.as required & as per direction of eic., painting of outdoor feeder panel / lt panel at switch room in all area with one coat of metal primer of anti-corrosive paint on rusted surface and two coats of approved synthetic enamel paint. the outdoor feeder panel should be painted by alternate white and red colour strips of suitable size for operartional area complete as required as per direction of e.i.c., replacement of damage street light loop-in loop-out box by ip 66 thermoplastic polycarbonete enclosure (minimum size 350x250x122) which is totally shock proof,safe, weather proof, rust proof, dust proof, water proof, halogen free silica free and having internally embeded gasket technology. the enclosure should have 04 nos of 25 sqmm elmax terminal to accomodate 4 x 25 sqmm lt cable, 1 no sp 6 amp mcb of approved make ms clamp for pole mounting completed as required i/c dismantling the existing loop-in loop-out box, cable connection, earthing etc and reconnection the same with the new cable gland, earthing connection etc as complete as required., carrying out of dsr item works as scheduled in dsr -2025 (internal and external) cpwd as and when required basis & as per direction of engineer in charge. (note - the firm has to quote/upload the percentage above/ below (+/- %) on the quantity mentioned against this item directly in the form of multiplying factor in the rate coloumn as clarified below - for example - if desired to quote 5% above on special repair 2025 rates, the rate column shall be filled as 1.05. if desired to quote 3% below on special repair 2025 rates, the rate column shall be filled as 0.97.)
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 24, 2026 (21 days left)
Tender Value :
1.3Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17076166
Location : cachar , assam
Source : GEM Tenders
NEW TENDER
tender for providing operation and maintenance services of electrical and mechanical installations for 1st year , providing operation and maintenance services of electrical and mechanical installations for 2nd year , day to day operation and maintenance of water pump house for 1st year , day to day operation and maintenance of water pump house for 2nd year , filtration and dehydration of insulation oil of existing ht installations , servicing testing checking and calibration of relay installed in 11 kv ht panel for 1st year , servicing testing checking and calibration of relay installed in 11 kv ht panel for 2nd year , calibration and testing of 8 nos air circuit breaker for 1st year , calibration and testing of 8 nos air circuit breaker for 2nd year , complete overhauling and repairing of 10 hp capacity water pump , complete re-winding of burnt out cooper coils of stator of 10 hp capacity , complete overhauling and repairing of 30 hp capacity , complete re-winding of burnt out cooper coils of stator of 30 hp capacity , replacement of 12 v 180 ah battery for dg set complete as required , replacement of 12 v 100 ah battery for dg set complete as required , carrying out of dsr item works as scheduled in dsr -2025, job contract for e and m installations at 11 kv substation and water pump house and allied works, providing operation & maintenance services of electrical & mechanical installations viz power supply system of 11 kv substation/power house, cts, transformers, avrs & ht & lt panels, apfc panel, dg sets, synchronizing panels, covering the scope of operation, repairs & maintenance, attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 08 nos. skilled, 01 no. semi-skilled and 03 nos. unskilled manpower (including reliever) as per scope of work given in additional terms of contract to ensure round the clock operation by providing adequate manpower (i.e. in three shifts basis, each shift of 8 hours) on all days including sundays & national holidays as per direction of eic. a) for 1st year, providing operation & maintenance services of electrical & mechanical installations viz power supply system of 11 kv substation/power house, cts, transformers, avrs & ht & lt panels, apfc panel, dg sets, synchronizing panels, covering the scope of operation, repairs & maintenance, attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 08 nos. skilled, 01 no. semi-skilled and 03 nos. unskilled manpower (including reliever) as per scope of work given in additional terms of contract to ensure round the clock operation by providing adequate manpower (i.e. in three shifts basis, each shift of 8 hours) on all days including sundays & national holidays as per direction of eic. b) for 2nd year, day to day operation & maintenance of water pump house of all types and capacities water pump sets, i/c lighting & power supply system attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 04 nos skilled and 03 nos unskilled manpower (including reliever) as per scope of work given in additional terms of contract to ensure round the clock by providing adequate manpower (i.e. in three shifts basis , each shift of 8 hours) on all days including sundays & national holidays & as per direction of eic. a) for 1st year, day to day operation & maintenance of water pump house of all types and capacities water pump sets, i/c lighting & power supply system attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, performing preventive maintenance on daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, maintaining of records in all pmi register etc. by deploying 04 nos skilled and 03 nos unskilled manpower (including reliever) as per scope of work given in additional terms of contract to ensure round the clock by providing adequate manpower (i.e. in three shifts basis , each shift of 8 hours) on all days including sundays & national holidays & as per direction of eic. b) for 2nd year, filtration & dehydration of insulation oil of existing ht installations (like- ht avrs & 11 kv indoor transformer) in substation using on line oil filtration equipment with initial heating arrangement to attain standard breakdown voltage including testing of breaking strength prior and post purification with certificate and replacement of silica gel of breather of the same etc as required and as per direction of engg-in-charge. location - sub station, servicing , testing , checking and calibration of relay (over current 2 nos + 1 no earth fault relay) installed in 11 kv ht panel including calibration and testing of 03 nos vcb (400 amp) 11 kv ht - cg make with suitable secondary injection kit and submission of test certificate completed as required, checking the function of auxiliary relay ( confirming the tripping) mechanism of the breaker due to high winding temperature, high oil temperature and due to bucholz relay , activation of the connection transformer, testing the of tripping system by secondary injection kit, tightning the terminals and termination, changing of all nuts and bolts i/c washers (if required), replacement of all insulator/bushing of 11 kv panel (01 incomer and 02 no outgoing+ insulators of pt section) (if required), replacement of the cork sheet and replacement of 3 sets of indoor type resin cast cts (if required) i/c pressure test at site and calibrating the same complete as required and as per direction of engg-in-charge. location - sub station a) for 1st year, servicing , testing , checking and calibration of relay (over current 2 nos + 1 no earth fault relay) installed in 11 kv ht panel including calibration and testing of 03 nos vcb (400 amp) 11 kv ht - cg make with suitable secondary injection kit and submission of test certificate completed as required, checking the function of auxiliary relay ( confirming the tripping) mechanism of the breaker due to high winding temperature, high oil temperature and due to bucholz relay , activation of the connection transformer, testing the of tripping system by secondary injection kit, tightning the terminals and termination, changing of all nuts and bolts i/c washers (if required), replacement of all insulator/bushing of 11 kv panel (01 incomer and 02 no outgoing+ insulators of pt section) (if required), replacement of the cork sheet and replacement of 3 sets of indoor type resin cast cts (if required) i/c pressure test at site and calibrating the same complete as required and as per direction of engg-in-charge. location - sub station b) for 2nd year, calibration and testing of 8 nos air circuit breaker (make - l&t) of capacity (range - 800 amp - 5 nos & 1250 amp - 3 nos) from oem authorize service dealer using suitable secondary injection kit and submission of test certificate completed as required. location - sub station a) for 1st year, calibration and testing of 8 nos air circuit breaker (make - l&t) of capacity (range - 800 amp - 5 nos & 1250 amp - 3 nos) from oem authorize service dealer using suitable secondary injection kit and submission of test certificate completed as required. location - sub station b) for 2nd year, complete overhauling & repairing of 10 hp capacity water pump i/c replacement of defective keys, bush, necessary lathe work, replacement of ball bearing & gland packing, painting and replacement of worn out minor hardware items etc. after dismantling from the existing location, transportation up to the workshop if necessary & reinstallation of the same, testing etc complete as required as per site condition. location - water pump house colony, complete re-winding of burnt out cooper coils of stator of 10 hp capacity 3 ph. induction motor, dismantling from the existing location, transporting upto the workshop and reinstallation of the motor after repair with new super enamel coated copper, heat burnishing along with all other necessary spare parts as required including giving less credit for the burnout copper coil complete as required. location - water pump house colony, complete overhauling & repairing of 30 hp capacity ie3 (energy efficient) water pump i/c replacement of defective keys, bush, necessary lathe work, replacement of ball bearing & gland packing, painting and replacement of worn out minor hardware items etc. after dismantling from the existing location, transportation up to the workshop if necessary & reinstallation of the same, testing etc complete as required as per site condition. location - water pump house salganga, complete re-winding of burnt out cooper coils of stator of 30 hp capacity ie3 3 ph. induction motor, dismantling from the existing location, transporting up to the workshop and reinstallation of the motor after repair with new super enamel coated copper, heat burnishing along with all other necessary spare parts as required including giving less credit for the burnt-out copper coil complete as required. location - water pump house colony, replacement of 12 v 180 ah battery for d.g set complete as required., replacement of 12 v 100 ah battery for d.g set complete as required., carrying out of dsr item works as scheduled in dsr -2025 (internal and external) cpwd as and when required basis & as per direction of engineer in charge. (note - the firm has to quote/upload the percentage above/ below (+/- %) on the quantity mentioned against this item directly in the form of multiplying factor in the rate coloumn as clarified below - for example - if desired to quote 5% above on special repair 2025 rates, the rate column shall be filled as 1.05. if desired to quote 3% below on special repair 2025 rates, the rate column shall be filled as 0.97.)
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 24, 2026 (21 days left)
Tender Value :
1.54Cr
View Documents
T18 Ref No : 16836607
Location : nagpur , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for induction heater coil assembly of extrusion press (oj/5611) suitable for pre-heating of 385mm dia al
Agency / Dept :
yantra india limited
Due Date :
Sep 08, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16768147
Location : kanpur , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for repairing of gadanieli induction coil ofc 7560 of sf section as per long item description annexure '
Agency / Dept :
advanced weapons and equipment india limited AWEIL
Due Date :
Sep 04, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16903475
Location : kokrajhar , assam
Source : GEM Tenders
LIVE TENDER
tender for coil type induction heater (mcode- m6200007173, pr- 100276545, bongaigaon)
Agency / Dept :
national thermal power corporation NTPC
Due Date :
Sep 05, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
34.41L
View Documents
T18 Ref No : 17001008
Location : ranchi , jharkhand
LIVE TENDER
tender for a) repairing/rewinding of 75kw, 440v and 55kw 440v induction motors at iwss under gm unit and b) complete repairing and rewinding of armature and filed coil with other misc. work of 15kva kirloskar make sl.no. 1ea1852 alternator dg set installed at c, a)repairing/rewinding of 75kw, 440v and 55kw 440v induction motors at iwss under gm unit and b) complete repairing and rewinding of armature and filed coil with other misc. work of 15kva kirloskar make sl.no. 1ea1852 alternator dg set installed at c
Agency / Dept :
central coalfields limited CCL
Due Date :
Sep 08, 2026 (5 days left)
Tender Value :
9.9L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17052301
Location : bhopal , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for electricity lab trainer , power factor demonstrator , three phase lab , single phase transformer lab , three phase induction motor lab , home electrical wiring training system , variable frequency drive training system , ac servo motor lab, basic electrical energy lab equipments, dc power supply 5v 200ma ac power supply 6v 1a relay 5v galvanometer 30 0 30 galvanometer resistance 80w light bulbs 6v potentiometers 25w 1w 10kw 1w switch 1 pole 2 way toggle type core types e i u coils no of turns wire dimension maximum current inductance mm amp approximate 200 turn 0.818 1.46 590 mh 400 turn 0.573 0.728 2.3 mh 800 turn 0.404 0.363 9.2 mh 1600 turn 0.251 0.144 34.2 mh 3200 turn 0.170 0.072 134 mh fuse 1a power supply 230v plus minus 10 percent 50hz dimension mm w 345 x d 245 x h 105, mains supply 230v plus minus 10 percent 50hz transformer primary voltage 0 to 230v ac secondary voltage 0 to 115v ac current rating 150ma transformer primary voltage 0 to 230v ac secondary voltage 0 to 9v 15 to 0 to 15v ac current rating 300ma resistance 500w 400w 200w 400w capacitor 12.5 microf 440 or 450v 20microf 440 or 450v inductor 200mh 1a mcb 2a, input three phase mains 230 v phase voltage 415 line voltage 50 hz plus minus 10 percent outputs 18 v phase voltage 28 v line voltage 50 hz plus minus 10 mcb (power switch) three phase input 18 v each phase 50 hz plus minus 10percent loads resistors 1 k 10 k 100 k capacitors 10 uf 100 uf and 1000 uf inductors 5 mh 10 mh 20 mh, mains supply single phase 230v ac plus minus 10percent 50hz single phase transformer rating 1kva primary voltage 0to 125v 0 to 125v secondary voltage 0to 125v 0 to 125v rated current 4a single phase auto transformer primary voltage 230v secondary voltage 0to 270v rated current 5a digital meters used ac voltmeter 450v 2nos. ac ammeter 5a 2nos. wattmeter 1500w mcb sp 6a, mains supply three phase 415v ac plus minus 10percent 50hz drive make siemens input voltage three phase 415v ac plus minus 10percent output frequency range 0 to 599hz default range with resolution of 0.01hz protection class ip20 three phase induction motor type squirrel cage rating 1hp 2 hp and 3 hp also available voltage rating 415v ac speed 1440 rpm plus minus 5percent insulation class b f loading arrangement mechanical brake drum or pulley aluminum casted digital meters used ac voltmeter 450v ac ac ammeter 5a ac mcb tpn 10a ac, mains supply 230v ac plus minus 10percent 50hz energy meter specifications meter constant 1600 impulses per kwh display counter 100 impulses per kwh single phase mcb 6a load specifications tube light 20w 220 to 240v ceiling fan 50w 220to 240v maximum load current 4a, mains supply three phase 415v ac plus minus 10percent 50hz drive make siemens input voltage three phase 415v ac plus minus 10percent output frequency range 0 to 599hz default range with resolution of 0.01hz protection class ip20 three phase induction motor type squirrel cage rating 1hp 2 hp and 3 hp also available voltage rating 415v ac speed 1440 rpm plus minus 5percent insulation class b f loading arrangement mechanical brake drum or pulley aluminum casted digital meters used ac voltmeter 450v ac ac ammeter 5a ac mcb tpn 10a ac, ac servo motor 1 no. power 400w rated voltage 220v rated speed 0 to 3000 r per min. current 1.0 ampere control type pwm control using drive encoder 2048 2500 10000 pulse per rev. inc remental absolute dynamic brake servo or controller off operable with the builtto in alarm activated servo drive system 1 no. led display 5 digit seven segment display function key 5 nos. mode shift up down set io interface port 1 no
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Induction Coil. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Induction Coil sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Induction Coil Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Induction Coil, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Induction Coil Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Induction Coil Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Induction Coil.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Induction Coil depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Induction Coil Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Induction Coil bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Induction Coil. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Induction Coil, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Induction Coil, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Induction Coil?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Induction Coil tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Induction Coil?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Induction Coil, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Induction Coil is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All