sales@tender18.in| +917069661818
Register Now Free Trail
Register Now Free Trail
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source
Tender Type

149Latest Fixed led Tenders List

Latest Fixed led Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Fixed led tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Fixed led tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Fixed led Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Fixed led tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Fixed led Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Fixed led Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Fixed led Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Fixed led tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Fixed led Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Fixed led sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Fixed led tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Fixed led tenders.

Is EMD mandatory for all Fixed led tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Fixed led work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Fixed led tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Fixed led Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16445575
Location : bhesan , gujarat
Source : GEM Tenders
NEW TENDER
tender for tools equpipment and machinary steel rule with metric and british graduation , try square , caliper inside spring type , scriber , centre punch , screw driver , chisel cold flat , hammer ballpen with handle , file flat second cut , file flat smooth , file half round 2 nd cut , hacksaw frame fixed type , safety googles , vernier bevel protector blade with acute angle attachments , portable rotory hammer drill electric , file flat bustard , file flat bustard , vernier caliper dial type , machine vice- swiwelbase , power tools for fastning , drill gauges , lifting sling , chipping hammer , hollow punch , crimping tool , rubber mat , wheat stone bridge with galvanometer and battery , potential transformer , solar panel with battery , single phase transformer, core type, air cooled , ceiling fan coil winding machine , primary current injection set , smart meter , ev charger home , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , conduit pipe bending machine, suitable for 15 mm,18 mm, 25 mmand 30 mm pipe , autotransformer 250v - 0 - 300 v,10a , power factor meter 440 v, 20 a, three phase portable box type , solid state solar based single phase energy meter bidirectional 5-30a 240v , magnetic flux meter 0-500 tesla , meter reading instrument mri , solar street light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 60 w led lights and 9 m height pole all dismountable , solar traffic light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable , solar dc pump 24v, 1 hp , digital multimeter, 150mm, 150 mm blade, 150 mm, 10 mm end,120 mm length, 150 mm flate type, 20 mm x 150 mm hcs, 450 grm, 1lbs, 220 grm, 1/2 lbs, 250 mm, 250mm, 300 mm, -, 26 mm capacity, 200 mm, 100 mm, 125 mm, capacity 10 to 18 mm, letter drill gauge number drill metric drill gauge 1.5 mm to12.5 mm 30 holes, single leg,8 mm nominal dia., 5,6,7 mm etc, 16 sq mm to 95 sq mm, 2ft x 4ft x 1inch, 415 v, 50hz, pt ratio, 440v/110v, 10va, 18 watt, 1 kva , 240-415 v, 50 hz, 250v, 50 hz, 1-ph, with speed control, 220v, 50 hz, 1-ph, output current - 200 a min with timer, 1 phase - smart energy meter 3 phase - smart energy meter, 1 phase input, 0-5,100,200,500milli-amperes 0-150,300,600,v ac-dc
Agency / Dept :
department of employment and training DET
Due Date :
Aug 11, 2026 (14 days left)
Tender Value :
501929
View Documents
T18 Ref No : 16446232
Location : bhesan , gujarat
Source : GEM Tenders
NEW TENDER
tender for tools equipment and machinary - steel rule with metric and british graduation , try square , caliper inside spring type , scriber , centre punch , screw driver , chisel cold flat , hammer ballpen with handle , file flat second cut , file flat smooth , file half round 2 nd cut , hacksaw frame fixed type , safety googles , vernier bevel protector blade with acute angle attachments , portable rotory hammer drill electric , file flat bustard , file flat bustard , vernier caliper dial type , machine vice- swiwelbase , power tools for fastning , drill gauges , lifting sling , chipping hammer , hollow punch , crimping tool , rubber mat , wheat stone bridge with galvanometer and battery , potential transformer , solar panel with battery , single phase transformer, core type, air cooled , ceiling fan coil winding machine , primary current injection set , smart meter , ev charger home , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , conduit pipe bending machine, suitable for 15 mm,18 mm, 25 mmand 30 mm pipe , autotransformer 250v - 0 - 300 v,10a , power factor meter 440 v, 20 a, three phase portable box type , solid state solar based single phase energy meter bidirectional 5-30a 240v , magnetic flux meter 0-500 tesla , meter reading instrument mri , solar street light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 60 w led lights and 9 m height pole all dismountable , solar traffic light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable , solar dc pump 24v, 1 hp , digital multimeter, 150mm, 150 mm blade, 150 mm, 10 mm end,120 mm length, 150 mm flate type, 20 mm x 150 mm hcs, 450 grm, 1lbs, 220 grm, 1/2 lbs, 250 mm, 250mm, 300 mm, -, 26 mm capacity, 200 mm, 100 mm, 125 mm, capacity 10 to 18 mm, letter drill gauge number drill metric drill gauge 1.5 mm to12.5 mm 30 holes, single leg,8 mm nominal dia., 5,6,7 mm etc, 16 sq mm to 95 sq mm, 2ft x 4ft x 1inch, 415 v, 50hz, pt ratio, 440v/110v, 10va, 18 watt, 1 kva , 240-415 v, 50 hz, 250v, 50 hz, 1-ph, with speed control, 220v, 50 hz, 1-ph, output current - 200 a min with timer, 1 phase - smart energy meter 3 phase - smart energy meter, 1 phase input, 0-5,100,200,500milli-amperes 0-150,300,600,v ac-dc
Agency / Dept :
department of employment and training DET
Due Date :
Aug 14, 2026 (17 days left)
Tender Value :
501929
View Documents
T18 Ref No : 16448737
Location : sikar , rajasthan
Source : GEM Tenders
NEW TENDER
corrigendum tender for capacity 20 to 160 mm , cylinder liner dry and wet liner press fit and slide fit , depth micrometer 0 to 25 mm , dial gauge type 1 gr a complete with clamping devices and with magnetic stand , different type of engine bearing model , different types of piston model , dividers with spring 150 mm , drift punch copper 150 mm , drill point angle gauge , drill twist 1.5 mm to 15 mm various sizes by 0.5 mm , electric soldering iron 60 watt 230 v , electric soldering iron 25 watts 230 v , electric testing screw driver , engineers stethoscope , feeler gauge 20 blades metric , file flat bastard 200 mm , file half round second cut 200 mm , file square second cut 200 mm , file square rough 300 mm , file triangular second cut 150 mm , files assorted sizes and types including safe edge file 20 nos , flat file second cut 250 mm , flat file bastard 350mm , fuel injection pump diesel in line , fuel injection pump dismantling tool kit universal vice , fuel injection pumps ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , glow plug tester , surface plate l 1600 w 1000 mm c i granite with stand and cover , grease gun , growler , hacksaw frame adjustable type 200 to 300 mm , hammer ball pein 750 gm , hammer chipping 250 gm , hammer copper 1 kg with handle , hammer mallet , hand operated crimping tool wire up to 4 mm , hand operated crimping tool wire up to 10 mm , hand shear universal 250 mm , hollow punch set of seven pieces 6 mm to 15 mm , injector cleaning unit technical , injector testing set hand tester , lifting jack screw type 3 ton capacity , lifting jack screw type 5 ton capacity , lifting jack screw type 20 ton capacity , magnifying glass 75 mm , marking out table l 90 w 60 h 90 cm , multi meter digital , oil pump gear type pump for lmv , oil pump rotor type pump for lmv , oil stone l 15 w 5 h 2.5 cm , oscilloscope 20 mhz , micrometer outside 50 to 75 mm , micrometer outside 75 to 100 mm , pipe flaring tool , piston ring compressor , pliers round nose 150 mm , portable electric drill machine , prick punch 150 mm , punch number 4 mm , rivet sets snap and dolly combined 3 mm 4 mm and 6 mm , scraper flat 250 mm , scraper half round 250 mm , scraper triangular 250 mm , scriber with scribing block universal , set of stock and dies metric , tinmans shear l 450 mm w 600 mm , sheet metal gauge , tinman s shear 300 mm , soldering copper hatchet type 500 gm , solid parallels in pairs different sizes in metric , spanner clyburn 150 mm , spanner t flocks for screwing up and up screwing inaccessible , spanner adjustable 150 mm , spark lighter , spark plug spanner l 14 mm w 18 mm size , steel rule 150 mm inch and metric , straight edge gauge 2 ft , straight edge gauge 4 ft , tachometer counting type , tandem master cylinder with booster working model , taps and dies complete sets b a , taps and dies bsw various type in inch , tap and dies set metric size 03 to 24 mm , taps and die set bsf various type in inch , taps and dies width worth fine , timing lighter new brand , torque wrenches 5 to 35 nm , torque wrenches 12 to 68 nm , torque wrenches 50 to 225 nm , tyre pressure gauge with holding nipple , universal puller , v block l 75 w 38 mm pair with clamps , valve lifter , valve spring compressor universal , vernier caliper 0 to 300 mm with least count 0 point 02 mm , water pump new brand , wire gauge metric , vices of 120 mm jaw , air conditioned crdi vehicle new brand lmv bs vi with abs and speed limiter , arbor press, mechanic diesel lab items, allen key set of 12 pieces with hex key sizes 2 to 14 mm made from forged steel alloy carbon steel, caliper inside 150mm spring made of carbon steel gauging point should be heat treated, centre punch 10mm dia x 100 mm round knurled body made of alloy steel gauging point should be heat treated, screw driver 250 x 9 mm flat tip size 8 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, properly heat treated., hammer ball pein, head weight 500 gm made from forged carbon steel, face heat treated. with wooden handle, hand file 200mm second cut, made of heat treated tool steel with wooden handle., philips screw driver 100 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip with neon tester., philips screw driver 150 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 200 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 250 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, philips screw driver 300 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated. magnetic tip, pliers combination 200mm insulated with moulded sleeves of high voltage grade, made from drop forged alloy steel with side cutting facilities, properly heat treated., screw driver heavy duty 200mm x 9 mm flat tip size 9 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., screw driver heavy duty300mmx 9mm flat tip size 10 x 1.2 mm, made from alloy steel, chrome plated, cellulose acetate handle, shank insulated, properly heat treated., spanner d.e. 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanner ring 6-32 mm. .(6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27, 25x28,30x32 mm.), set of 12 pieces made from forged carbon steel., spanners socket with speed handle, t-bar, ratchet and universal up to 32 mm set of 28 pieces with box. made from forged carbon steel., steel rule 300 mm. metric, english both graduation made of stainless steel with conversion table engraved, as per drawing l 150 mm w 200 h 400, wire cutter & stripper 150 mm made of high carbon steel , wire stripping capacity up to 6mm, spanner adjustable 350 mm blade, made from alloy steel, workshop grade, 1 should be trigger operated blow gun with interchangeable nozzles with metal gun 2 fitted with brass air inlet ferrule 3 suitable for quick removal of chips, dust and particulate from any surface 4 operating pressure 80 to 150 psi 5 high pressure nozzle 6 safety nozzle adaptor 7 crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application 8 low pressure nozzle and supplied with manual, ammeter dc shunt type up to 300 amp the shunts are constructed from high grade managing, air ratchet with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box with manual, air impact wrench with 180 ft lb 244 nm max torque and 7100 rpm and a feather touch trigger two position forward power regulator and conveniently located forward reverse ring provide precise control with crimped with solid brass swivel 360 degree with quick change connector of steel construction with standard seal material suitable for air application and filter standard accessories in box and manual will be provided. square drive half inch bolt size in the box 9 to 27 mm, angle plate size 200x100x200mm made from close grain c.i. workshop grade., anvil 50 kg. single horn type made from cast steel working face heat treated, face having hardie hole & punching hole, stand made from fabricated angle iron (50 x 50 x 6 mm) height 400 mm, alternator starter with minimum 2 hp ac motor digital auto electrical test bench checking for alternator and starter motor auto electrical test bench checking for alternator and starter motor mild steel frame work table top test bench 2 hp and 3 phase1440 rpm motor induction motor suitable for 50 hz 415 v ac supply with heavy duty transformer for starter testing with light run test variable frequency drive vfd overload capability 150 percentage of rated current 60 seconds built in pid simplify the establishment of a closed loop control system key lock and function selection communication port rs 485 4 point 3 inch colour hmi for indication for voltage and current 2 ch analogue input controlled via rs 485 bus utilizing modbus rtu protocol 1 channel dc current input with 75 mv input for shunt 1 channel dc voltage input 200vdc 1 construction of relay output 7a 230vac 2 leds for indicating the power status and signal trans receiving status capable to interface with pc attached with thermal printer communication interface rs485 rtu diode150 a 12 to 24 v 4 nos shunt 200a 75 mv transformer 12v 200 a 24 v 150 a 1 no transformer 0 to 240 v primary 12 to 0 to 12 v secondary 1 no mains supply 415 v ac 3 phase 50 hz ac power supply v belt heavy duty banana terminals on the front panel pulley groove for alternator checking heavy duty rugged vice for mounting alternator and starter operation manual should be provided, voltage 12v input volt 230v 50hz output volt 12 v dc capable for 5ah 35ah battery charged rotary swicth to select volt and amp ammeter display and main switch plus minus knob crocodile connector with wire 2 ft in length aligator clips high current charging upto 15 ampere circuit breaker for reverse battery auto cut off after charging, blow lamp capacity 1000ml body made from brass. with inclined burner type, should be used on vehicle belts where the manufacturer specifies the timing belt tension to be set at a specific location on the belt span between pulleys should have clear incremental markings with knurled knob for accurate measurement. should speed up timing belt installation .measurement range 0 to 80 kg 750 newton supplied in a foam inlay box, power supply electrical electrical cable m 5 mtr working pressure bar 8 to 12 kg cm2 hose length m 10 mtr suction and discharge each motor rpm 2800 rpm flow rate l h 8 to 12 lpm phase 1 phase 3 hp 230 volt suitable for cold water spray gun standard number of pistons plungers 3 pressure gauge auto stop facility for power saving suitable guns for water and foam sprey water filter pressure regulating valve for increasing and decreasing output pressure the operating unit should be mounted on a ms structure trolley type starter switch caster wheel 2 nos water pipe inlet and out let, automatic double pawl braking system capacity range 1- 3 ton fully forged hooks are fitted safety latches shield bearing zinc plated hand chain as standard standard lift 3 meter effort required to lift 3 ton load- 30 kg. with tripod stand & standard accessories., chisel flat 100mm, made of forged steel. point heat treated., circlip plier internal 150 mm drop forge alloy steel heat treatment moulded sleeve . ., circlip plier external 150 mm.drop forge alloy steel heat treatment moulded sleeve ., circlip plier internal 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., circlip plier external 200 mm. .drop forge alloy steel heat treatment moulded sleeve ., clamps c 100mm, made of forged steel., clamps c 150mm, made of forged steel., clamps c 200mm, made of forged steel., tray cleaning 450 into 300mm -gi sheet 18 g side handle both border wires, 1 quickconnect adapter push pressure scale 0 1000 psi 0 7000 2 kpareads pressure from 0 to 1000 psi 3 2 to 9 by 16 diameter gauge 4 thumb button air release should be supplied with adapters for suzuki hyundai gm ford isuzu mercedes toyota volkswagen and peugeot compatible for dry test with adptor standard accessories all above items should be placed secured in a blow molded plastic box or metal box, connecting rod alignment fixture height of fixture 450mm connecting rod 40 to 100mm connecting rod alignment fixture checking bent twist offset precision ground surfaceshould be supplied with following accessories bent and twist indicator bending bar with alignerdial indicator and the connecting rod fixture ms iron should be fitted over a base etc with all accessory, soldering iron copper bit weight 250gm hatchet type with handle, cylinder gauge, bore dial gauge with accessories 20-160 mm least count 0.01 mm self cantering with interchangeable mounted head complete., technical specification cylinder liners of following types dry liner for engine cylinder press fit type wet liner for engine cylinder with rubber o ring slide fit liner piston with ringstandard features, micrometer depth 0 to 25mm lc 0 point 01mm carbide tipped on measuring face made from alloy steel complete in box, dial gauge indicator l.c. 0.1 mm ran- ge 10mm dial graduation 0-50-0 balance plunger type dial & holder. magnetic base with on-off switch, fine tolerance setting arm, stem dia. as per dial indicator, complete set in dial gauge., the model will made out of different type of engine bearing suitable for engine 1 shell bearing for crankshaft with main journal and big end journal 2 thrust bearing for crankshaft 3 ball bearing for crank shaft 4 bush bearing for connecting rod 5 needle bearing for connecting rod 6 bush bearing for camshaft & rocker arm 7 shell bearing for overhead cam shaft 8 needle bearing for rocker arm 9 name mention of each bearing on board, the model will be made out of different type of piston model. 01set concave head dome head flat head solid skirt recessed head light weight model for easy shifting. piston will be mounted on a wooden board name mentioned of each type the piston.and constructional diagram details printed on to a colourful panel with details of applications the item will be supplied in a dust proof box & covered by the acrylic sheet., divider spring joint 150mm, made of alloy steel., drift punch copper 150mm made by copper, drill point angle gauge made by drop forged steel., twist drill straight shank high speed steel 1.5 to 15mm by 0.5mm set 10pcs. high carbon steel &heat treated., soldering iron 60 watt, 230 v.a.c. standard length of mains lead with 3 pin top, bit made from copper., soldering iron 25 watt, 230 v,.a.c. standard length of mains lead with 3 pin top, bit made from copper., neon tester 500 volt heavy duty insulated. handle made from transparent cellulose acetate with plated metal clip. blades made from selected steel chrome & insulated., engineer s stethoscope with standard accessories, feeler gauge set of 20 blades metric, different sizes, length of blades 100 mm, made from alloy steel., file flat 200mm bastard made of heat treated tool steel with wooden handle., file half round 20cm second cut, made of heat treated tool steel with wooden handle., file square 200mm second cut, made of heat treated tool steel with wooden handle., file, square 300mm rough, made of heat treated tool steel with wooden handle., file triangular 150mm second cut, made of heat treated tool steel with wooden handle., files assorted sizes and types including safe edge file (20 nos), made high carbon/high speed steel. size (150 mm)., file flat 250mm second cut, made of heat treated tool steel with wooden handle., file flat 350mm bastard, made of heat treated tool steel with wooden handle., fuel injection pump (diesel) inline complete pump assembly suitable for 4/6 cylinders diesel engine rsv mechanical or pneumatic governor type the item will be supplied on suitable plywood and collared with attractive colour. a dust proof wooden box & covered by the acrylic sheet., fuel injection pump dismantling tool kit 1. universal vice 2. pre stroke setting attachment with gauge, 3. pump couplings, 4. control setting gauge with attachment, 5 .tappet adjusting spanner (thin),6. ring wrench,7. tappet lifter, 8. mechanical finger (gripper), 9. adapter capsule box for fip, 10. thread puller for fly weight, 11. drift for bottom plug, 12. impact screw driver, 13. flower/trox allen key set, 14. attachment for setting angle of accelerate lever, 15. coupling for fip cam, coupling wrench, 16. round nut spanner different type, 17. ve pump holding attachment, 18. inline and rotary pump holding attachments,19. drift for installing and removing oil seal, 20. holder spanner, 21. spring locking plates, 22. governor weight remover., fuel injection pump in diesel type distributor fuel rotary pump with dpc complete pump assembly compatible for 4 cylinders diesel pump operated by handle and constructional diagram details printed on to a colourful panel with details of applications will be supplied with along with all tools and special tools and accessories for dismantling and assembling fuel injection pump special tools 1 extra long socket 2 mounting stand for ve pump distributor fuel rotary pump dpc pumps 3 injection pump special socket 4. coapling for ve pump distributor fuel rotary pump dpc pumps 5 testing jig 6two pin spnner 7 huk spanner 8.pump nozzle refting tool, power input 8point 5 to 15 volt max current 80 ampere, surface plate made of closed grain seasoned cast iron/ granite 1600 mmx 1000 mm grade 1, with calibration test certificate, complete with top cover, side handle. m.s. fabricated standard height stand with leveling screws ., grease gun pressure type 500 gm. capacity hand operated, manufactured from tin plate with steel pump with fixed spot., growler general & internal set suitable to test d.c. armature and ac motor starter rating supply ac. 250volt 50hz., hacksaw frame adjustable type 200-300mm with blade & handle., hammer ball pein head weight 750gm made from forged carbon steel, face heat treated. wooden handle fitted, hammer chipping 250gm with handle, one side chisel and other side pointed end type hard and tempered, steel handle about 250 mm long., hammer copper forged head weight 1000gm with fibre glass handle,, hammer mallet head dia.100 mm. made from wood with handle., hand operated crimping tool for crimping up to 4 mm, hand operated crimping tool for crimping up to 10 mm, hand shear universal( straight snip ) 250 mm, made from drop forge steel. cutting edge hard & tempered., punch hollow, hole dia 6 to 15 mm set of 7 pieces made from alloy steel, main unit power supply ac 220v plus minus 10 percent 50hz ultrasonic cleaner power 30 to 50w ultrasonic bath inner body material stainless steel simulated rpm range 10 to 9990 rpm step 10 rpm time range 1 to 9999 pulse width 0 point 5 to 25 ms step 0 point 1ms fuel tank capacity 2 to 4 ltr no of glass tube 4 nos with marking glass tube holder and manifold moc aluminium display type led suitable for all types of petrol injectors and gdi gasoline direct injection injectors achieve automatic cleaning and testing of injectors the machine should be capable to perform flowing test uniformity/spray ability test will be able to test the uniformity of injecting amount of each injector and to monitor the spraying status of each injector with the help of backlight leakage test will be able to test the sealing and dribbling conditions of injectors under system pressure injecting flow test will be able to check the injecting amount of the injector in 15 seconds of constant injection auto test will be able to test injectors by simulating different working conditions ultrasonic cleaning will be able to perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely, for nozzle sizes presser gauge 0 to 400 kgf cm2 standard accessories steel aluminium fuel container with filter manual hand operating lever handle with grip. along with split pin three way shut off valve with valve spindle. suitable fuel pipes for all injector, lifting jack screw type 3 ton capacity for vehicle 3048 kg road open height 13 inch closed 4 inch dia of screw 1 point 25 inch with bearing type lifting jack, lifting jack screw type 5ton capacity for vehicle 5048 kg road open height 13 closed 7 inch dia of screw 1 point 50 inch with bearing type lifting jack, lifting jack screw type 20 ton capacity road open height 14 inch closed 7 dia of screw 1 point 75 inch to 2 point 0 inch square threads with bearing type, magnifying glass 75mm with handle, marking table made from seasoned close grain c.i. 90cm x 60cm x 90cm. workshop grade with test certificate. with steel handle both side, levelling screws & cover. m.s. fabricated stand in standard size, digits 3 and half digit display lcd display with large digits for easy visibility voltage range ac up to 750v ac voltage range dc up to 1000v dc ac and dc current range up to 20a resistance measurement up to 200 mohm with capacitance frequency diode transistor test audible continuity test data hold facilities, 1. gear type pump for lmv this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine, 1. rotor type pump for lmv. this model which will give complete idea of oil pump. the automotive oil pump for dismantling and assembling. model will fitted on suitable plywood. suitable for crdi/mpfi engine., stone oil 15 x 5 x 2.5 cm. one side rough & one side smooth., analog oscilloscope 20 mhz two channel 4 trace monochrome display 1 general portable rugged including features of component tester and in built frequency counter 2 bandwidth dc to 20 mhz 3d b 3 of channels two channels 4 deflection coefficient in calibrated steps from 5 mv to 5 v cm 5 rise time 17 point 5 ns 6 variable hold off for stable triggering 7 input impedance 1 mohm 25 pf 8 time base coefficients 18 calibrated steps 0 point 5microsec per cm to 0 point 2 sec cm with 5 magnifier to 100ns cm 9 trigger system automatic and normal level adjustable 10 source ch i ch ii alt line external 11 slope positive negative 12 coupling ac dc gnd 13 sensitivity 5 mm 14 trigger bandwidth 40 mhz 15 horizontal deflection dc 2 point 3 mhz 3db bandwidth 16 x to y mode phase shift 3 degree up to 60 khz 17 frequency counter range 20 hz to 30 mhz in built 18 computer interface usb 19 resolution 10 hz 10 khz 20 sensitivity 0 to 5v by div 21 attenuation 1 ratio 1 and 1 ratio 20 22 max input voltage 300 v rms cat ii 23 crt 140 mm rectangular with internal graticule and p31 phosphor 0 point 8 mm green colour plexiglass 24 calibrator operator 1 khz square wave 0 point2 vpp for probe compensation 25 z modulation ttl level 26 power supply 230 v plus minus 10 percent 50 hz ac supply component tester built in single touch, micrometer outside 50 to 75 mm l c 0 point 01 mm carbide tipped on anvil and spindle measuring face with spindle lock setting spanner and test piece 50 mm made of alloy steel complete in box with master, micrometer outside 75-100 mm, least count 0.01mm, carbide tipped on anvil &spindle measuring face, with spindle lock, setting spanner & test piece 75 mm, made of alloy steel complete in box with master., flaring tool set single type for tube 4 point 7 to 16 mm o d block and cone made of alloy steel and hard tempered nickel chrome plated able to flaring 1 by 2 inch 7 by 16 inch 1 by 4 inch 3 by 16 inch 3 by 8 inch and 5 by 8 inch o d, piston ring compressor 50 to 150 mm 2 1 by 2 inch wide spring bands equally distributes tension for easy compression for use on all passenger vehicles, pliers combination 200 mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, pliers nose 150mm insulated with moulded sleeves of high voltage grade made from drop forged alloy steel with side cutting facilities properly heat treated, drill machine portable electrical 15 mm capacity a c single phase input full load 235 watt rpm 2800 and standard length supply cable and key, prick punch 150mm knurled body made from tool steel tip ground and heat treated, punch number 4 mm made from tool steel hardened set containing set of 9 piece 0 to 9 in suitable container, rivet sets snap and dolly combined 3 mm 4 mm 6 mm hand operated mabe drop forgd steel, scraper flat 250mm made from tool steel tip hardened and ground with wooden handle, scraper half round 20mm made from tool steel tip hardened and ground with wooden handle, scraper triangular 250mm made from tool steel tip hardened and ground with wooden handle, scriber with universal scribes block and accessories, dies set of stock and dies metric dies 3 4 5 6 8 10 12 14 16 and 18 set of 10 made from alloy tool steel dies circular split pattern type with suitable die stock with suitable dies handle dies hardened and tempered complete set in box, heavy duty cast iron body blade length600mm blade material d2 table size 450 mm into 600 mm back gauge attachment table 2t slot paddle spring operated, sheet metal gauge made from alloy steel steel graduation in both system british and metric, tinmans shear 300 mm made from drop forge steel cutting edge hard and tempered, soldering copper hatchet type 500 gms, solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated solid parallels in pairs different sizes in metric assorted h c s or alloy steel properly heat and treated size 1 by 2 inch accuracy 0 point 0002 inch material made of high quality alloy steel precision ground and hardened product includes one pair of 1 inch into 6 into 1 by 2 into one pair of 1 to 1 by 2 inch into 6 into 1 by 2 inch one pair of 1 to 1 by 4 inch into 6 into 1 by 2 inch one pair of 1 to 3 by 4 inch into 6 into 1 by 2 inch application to be used in setting up work for drilling and milling, spanner clyburn 150mm. made from forged carbon steel. phosphate finish, spanner t flex for screwing up and unscrewing in inaccessible position and size 6 8 10 12 14 set of 5 pcs, spanner or wrench adjustable 150mm. standard pattern selected, made from forged steel heat treated, spark lighter friction type suitable for gas lighting, spark plug spanner size14 into 18 mm made from forged carbon steel, steel rule 150mm metric english both graduation made of stainless steel with conversion table engraved, straight edge 600 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, straight edge 1200 into 40 into 6mm made from alloy steel hardened and ground working surface by hand scrapped accuracy work shop grade suitable in box, tachometer counting type display 5 digit lcd display accuracy plus minus 0 point 05 percent plus 1 digits rpm test range 2 to 99 999 rpm count range 1 to 99 999 counter resolution 0 point 1 rpm 2 to 999 point 9 rpm 1 rpm over 1000 rpm sampling time 0 point 5 sec over 120 rpm detecting distance 50 to 500 mm, this model which will give a complete idea of tandem master cylinder in vehicle and it s function the working model of tandem master cylinder assembly consisting of following minimum parts and practically demonstrable brake disc assembly one caliper assembly brake pad tandem master cylinder with vacuum booster vacuum pump brake hoses oil reservoir with oil with brake pedal features the model will be mounted on m s stand with good quality paint applications suitable sectioned to demonstrate the internal construction diagram details printed on to a colourful panel operating manual will be provided., taps and dies set b.a. 0 to 10 circular split pattern die & hand tap set of 3 piece made from alloy tool steel with suitable die stock and tap handle. taps and dies hardened & tempered. complete set in box, taps and dies b s w 1 by 4 5 by 16 3 by 8 inch 7 by 16 1 2 5 by 8 3 4 inch 7 by 8 1 inch set of 9 made from alloy tool steel dies circular split pattern type with suitable die stock hand tap set of 3 piece and tap handle taps and dies hardened and tempered complete set in box, tap and dies set metric size 03 to 24 mm 3 4 5 6 8 10 12 14 16 20 22 24 mm set of 12 made from alloy tool steel dies hand circular split pattern type with die stocks tap set having three piece taps with suitable tap handle and according to size taps and dies hardened and tempered complete set in box, taps and die set b s f by 4 5 by 16 3 by 8 inch 7 by 16 1 by 2 9 by 16 5 by 8 3 by 4 7 by 8 1 inch set of 10 made of alloy tool steel tap set of 3 piece circular split pattern die set tap wrenches and die stocks taps and dies hardened and tempered complete set in box, taps and dies width worth fine 1 by 8 inch 3 by 16 inch 3 by 8 inch 1 by 4 inch 5 by 16 inch 7 by 16 inch 1 by 2 inch 5 by 8 inch 3 by 4 inch 1 inch set of 10 made from alloy tool steel dies circular split pattern type with die stock hand tap set of 3 pieces with suitable tap handle. tap and dies hardened and tempered complete set in box, timing lighter with neon bulb for setting of all kind of petrol engine timing illumination angle approx 15 degree strobe tube high intensity xenon tube with cable used for checking ignition timing of petrol engine easily operate on 12v ignition systems 12 volt battery operated focused lens should provide light for high visibility of timing mark suitable for petrol carstwo wheelers handle design be more comfortable and easy to operate manufactured by standard company provided with suitable woodenplastic metal box, torque wrench 5 to 35 nm force, adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 12 to 68 nm force adjustable by turning knurled handle barrel type rod form chrome plated brake over type, torque wrench 50 to 225 nm force, adjustable by turning knurled handle barrel type rod form chrome plated. brake over type, tyre pressure gauge with holding nipple for measuring 0 to 160 lb by sq inch and 0 to 12kgf by sq cm of tyre pressure, universal puller for removing pulleys bearings, v block 75 into 38 mm pair with clamps v block pair with one clamps 75 into 38 into 50 mm by 75 into 50 into 50 mm made from close grain c i workshop grade, valve lifter valve spring for lifting & realizing of spring automatic ratchet lock c type reversible jaw adaptor for multi valve engines capacity 45 to 145mm throated clearance 250mm big window jaw adaptor for easy replacement of valve collects, valve spring compressor universal suitable for various cylinder head engine models, vernier calliper 300 mm length with metric and inch scale l c 0 point 02 mm four way quadric measurement type made from stainless chrome steel micro lapped hardened and tempered in box, automotive water pump of any multi cylinder water cooled engine for dismantling and assembling colored with attractive color. good finish the model will be fitted on suitable plywood sheet and constructional diagram details printed on to a colourful panel with details of applications, wire gauge made from alloy steel, gauge size 0 to 36 swg graduation in metric, bench vices 12cm jaw body made from close grain sg iron and serrated alloy steel jaw jaw heat treated spindle handle dia grater than equal 10 mm and closed on both end unbrakable materials screw materials en 24, engine type 3 cylinder inline common rail turbo diesel iron block air conditioned type displacement 1500 cc rear wheel drive water cooled engine fuel system common rail direct injection body two box five door wagon transmission type 5 speed manual suspension front independent with coil spring rear independent with coil spring steering type power assisted steering power window all four windows reverse gear sensors. anti theft device gprs inbuilt turning diameter 11 point 6 m ground clearance 180 mm wheel base 2680 mm fuel tank 60 litre s standard accessories owner s manual bs vi with abs and speed limiter, an arbor press is a small hand-operated press. it is typically used to perform smaller jobs such as staking riveting installing configuring and removing bearings and other press fit work removable machined steel anvil provides accurate work support in for slot positions automation grade manual material iron weight 30 to 50 kg usage application industrial capacity 2 ton, exhaust gas analyzer petrol arai approved to check construction of co2 o2 and hc and nox 1 construction of carbon monoxide range 0 to 9 point 999 percent resolution 0 point 01 percent 2 co2 carbon dioxide range 0 t
Agency / Dept :
department of technical education DTE
Due Date :
Jul 30, 2026 (2 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16450721
Location : bathinda , punjab
Source : GEM Tenders
NEW TENDER
tender for asphalt base , 8 layer synthetic flooring , basketball post fixed in ground , flood light installation and electric work , chain link fencing , led score board , seating arrangements., construction of basketball court with synthetic surface poles and allied accessories, dressing of soil, compaction of the sub base by 8-10 roller and anti termite & weedcide, lay a layer respectively of 3 inch wbm to be densely compacted by keying and inter locking the stones to insure no settlement takes place, lay a 30mm compacted thick hot mix asphalt mb course, slope to be maintained 0.5 inch at every 10 feet edges of the court sealed with concrete by a slope open saucer drain at the single lower end, lay a 20mm aggregate mix with dust compacted hot mix ac course, primer - providing and laying one layer of primer on exiting base., filler course- providing and laying two layer of acrylic resurfacer blended with silica sand for filling and smoothing sub floor, cushion course - providing and laying three layer of unirubber heavy cushion finish in preparation for texture and finish courses, texture colour coat - providing and laying one coat of pre coat concentrated colour provides a uniform surface texture., finish colour coat - providing and laying one coat of pre coat concentrated colour will create a durable finish highly resistant to all weather all ultraviolet degradation., game line marking - providing and laying game line marking as per standard., made in ms pipe of 8 inches round with standard size and specifications 2.2 meter projection having 108cm x 105 cm x 25mm acrylic transparent boards with steel angle frame along with 2 back supports dunking rings 3 spring mechanism., stadium poles (6 meter) with stand for one light fitting stand monkey ladder with base plate and foundation bolts (100mm) (4/4) heavy (decco painted), led flood light - 200 watt led flood focus light 02 nos each tower with one years warranty make -tara gold, cables - 3cr x 2.5 sqr mm cu flexible for lighting make - finolex/ polycab, panel plate - mcb sp- 01 nos/ connector - 01 nos with backalite plate all attachments, fabrication and erection of g.i pvc coated chain link fencing 50mm x 50mm 12 gauge hexagonal shape on toe wall consisting of eraction of 50mm od m.s pipe at approx distance of 10 feet vertical member grouting the same in the toe wall and tie the horizontal member with 50 mm od ms pipe at the middle providing one gate. complete with two coats of enamel paint with one coat of red oxide primer on o.d.m. pipe, not on g.i chain link fencing, height of chain link fencing is 6 ft toe wall, electric score board attached cable system led based size 2 feet x 3 feet with movable stand and remote, seating of total four stair case each of 20 feet x4 feet x4 feet alongwith it a 15feet x10 feet stage in the center of one of two side as mentioned in the detailed site plan placed
Agency / Dept :
indian army
Due Date :
Aug 17, 2026 (20 days left)
Tender Value :
0
View Documents
T18 Ref No : 16360284
Location : tirupati , andhra pradesh
LIVE TENDER
tender for hiring of indoor/outdoor and night visible true colour fixed led video display system and dg set in connetion with annual brahmotsavams at sri govindaraja swamy temple, tirupati during the year 2026-27
Agency / Dept :
tirumala tirupati devasthanams TTD
Due Date :
Aug 05, 2026 (8 days left)
Tender Value :
1661793
View Documents
T18 Ref No : 16424060
Location : bardhaman , west bengal
Source : GEM Tenders
LIVE TENDER
tender for supply laying and testing cable xlpe insulated screened pvc bedded galvanized steel strip etc. , excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting etc. , excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out etc. , returning filling in including spreading levelling watering and well ramming in layers etc. , removal of surplus soil to a distance not exceeding 50 m and depositing where etc. , supply and lay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm etc. , supply and lay for dry clean dirtless river sand filling for cable protection with a layer of 8cm etc. , m and l for double wall corrugated dwc high density polyethylene pipes hdpe of 90mm dia etc. , m and l for fixing gi tubing 80mm dia light grade use for the protection of cable etc. , m and l for manual boring under road crossing and laying pipe across the road etc. , sandf pcc cable route marker of size 900x300x70mm embossed with ht ug etc. , material and labour for steel tubular poles complete with cast iron base palate final taper plug bolts nuts etc. , m and l for switch air break gang operated triple pole out door type unit on ht 11 kv etc. , m and l for 11 kv 200 amps outdoor type horn gap fuse set conforming to is 9385 part i and ii etc. , m and l for cross arms bracing supports clamps and back plates fabricated from structural etc. , m and l for pin type porcelain vitreous brown insulator of size 150mm height 150mm etc. , m and l for lightning arrester surge protector 11 kv grade heavy duty single pole etc. , s and f danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled white etc. , m and l for cement concrete in foundations filling and mass concrete type d2 etc. , m and l for pcc 1 3 6 type c2 using 40mm grade aggregate as in foundation for pole etc. , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole etc. , m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick etc , m and l for earth continuity conductor or main earthing lead fixed to wall on batten etc. , m and l for disc type porcelain polymer insulator vitreous 145 mm height and 255 mm etc. , pick axe as per is 273 (q4), supply, installation, testing of current transformer 33kv, single phase, outdoor oil filled , ratio 150 75/5 5a , two core, one metering (burden 15va, accuracy class 0.5) and one protection core (burden 30va, accuracy class 5p20) insulation level 36 kv / 70 kv as per is 2705 to suit vcb make complete incl taking out old ct all as per sample and directed., supply, installation, testing of 33 kv single phase out door oil cooled pt of ratio 33 kv/ rt 3 / 110 v/rt 3 accuracy class 1.0 . burden 100va. insulation class 70/170 kv , voltage fector 1.2 cont and 1.5 for 30 sec , confirming to is 3156 complete (as per sample) incl taking down old unserviceable pt all as specified and directed., supply & fixing of 33 kv disc type suspension insulator, porcelain/polymer type, 70 kn mechanical strength, complete with cap and pin, ball & socket type coupling, suitable for 33 kv overhead line, conforming to is 731, including all fittings and accessories complete all as specified and directed., supply & fixing of 33 kv post type insulator, porcelain/polymer, brown glazed, suitable for 33 kv overhead line, complete with gi pin, lead thimble, and all accessories, conforming to is 731 / is 2544 complete all as specified and directed., preparation of detailed layout drawing in autocad and supply, fabrication, uv printing/engraving and fixing of 33 kv main receiving station layout, powerhouse no 2 layout and powerhouse no 1 layout on acp board, comprising site verification, preparation/finalization of single line diagram (sld) and equipment layout in autocad, submission for approval, high resolution uv printing or cnc engraving on minimum 3 mm thick aluminium composite panel (acp), protective coating, aluminium framing, and wall mounting complete in all respects., m & l for filling and spreading aggregate/stone using 40 mm grade trap stone aggregate around 4 pole , 2 pole structure and transformer etc., m&l for surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed., m&l 150 mm thick soiling (or sub base) with broken boulders or quarried stone, interstices filled, suface formed and rolled and consolidated to required gradient and camber all as specified and directed., m&l for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed., m&l for pcc 1 4 8 type d 2 (40mm graded aggregate) in foundations, filling and mass concrete., m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., supply and fix led tube light fitting surface and wall mounted batten with 20 watts led including removal of old one complete all as specified and directed., m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick buried directly in ground earth pit not less than 225 metres deep below ground level with top edge of the plate not less than 15 metres below normal ground level connected to galvanised iron strip 25x4mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point all as specified or indicated including testing on completion, excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated soft/loose soil all as specified and as directed., removal of surplus soil to a distance not exceeding 50 m and depositing where directed by engr in charge., m&l for fixing gi tubing 15mm dia light grade use for the protection of earthing lead., m&l for fixing gi tubing 20mm dia light grade use for watering to earthing, m&l for funnel, wire mesh, lugs, nut, bolts etc, m&l for ms angle frame and sheet cover, m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) for earth pit chamber inclduing form work and finishing the surfaces even and smooth etc complete, m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip complete, m and l for disc type porcelain/polymer insulator vitreous 145 mm height and 255 mm diameter ball and socket type suitable for 11 000 volts grade complete with one galvanized mild steel spindle two galvanized iron washers and one galvanized iron nut complete in all respects as specified and as directed.
Agency / Dept :
indian army
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16424070
Location : bardhaman , west bengal
Source : GEM Tenders
LIVE TENDER
tender for taking down of light fittings of any type size and model etc. , taking down of brackets of any type size and model etc. , dismantling steel poles struts of any size and removing off the site etc. , taking down out unserviceable ug cables of any cross sectional area etc. , material and labour for steel tubular poles complete with cast iron etc. , s and f cable junction box 155x210x92 mm in size made out of thermoplastic etc. , supply and passing through steel tubler pole service connection etc. , s and f singlearmbracketmadeof40mmdia10mtrlong for security light , m and l for earthing complete with galvanised steel earth plate electrode etc. , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth etc. , returning filling in including spreading levelling watering and well ramming etc. , removing excavated materials soils not exc. 50.00 mtr etc. , m and l sand cushioning dry in trenches for protection of ug cables etc. , supply and laying well burnt bricks locally available best quality etc. , laying only in trenches or passing through pipe xlpe insulated heavy duty galvanised steel strip etc. , laying only in trenches or passing through pipe xlpe insulated heavy duty etc. , s and f 40 mm high density polyethylene pipe hdpe of pressure rating 6 kgf etc. , s and f galvanised iron pipe 40mm bore dia light grade for protection of ug cable etc. , labour only for horizontal boring for passing protection pipe up to 80mm bore dia etc. , m and l for pcc 1.2.4 type b1 using 20 mm graded aggregate etc. , m and l for pcc 1.3.6 type c2 using 40 mm graded aggregate etc. , supply and fixing crca sheet steel duly phosphatized and powder coated with 7 tank etc. , fixing only led street light fitting 100 watt 230 v ac outdoor type etc. , fixing only led flood light fitting 200 watt 230 v ac outdoor type etc. , insulation tester (q3), taking down of light fittings of any type size and model complete all as specified and directed., taking down of brackets of any type size and model complete all as specified and directed., dismantling steel poles/struts of any size and removing off the site complete all as specified and directed., taking down/out unserviceable ug cables of any cross sectional area and connections including bricks, gi pipes, etc. of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz bricks, cables, gi pipes, etc. and keep in safe custody for re-use, complete all as specified and as directed., material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 sp-22 8.50 meter long including painting all external exposed steel surfaces with two coats of aliminium paint, s&f cable junction box 155x210x92 mm in size, made out of thermoplastic, having ip 66 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 nos polymide gland with check nut (m-32 -02 no & m-25 -01 no) fixed on poles with aluminium clamps of size 25x3mm, nuts, bolts, washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed., supply and passing through steel tubler pole/service connection, 1100 volts grade multicore,fr, round insulated copper conductor and sheathed flexible cable,multistranded, three core of nominal cross sectonal area 1.5 sq mm,for connection of security light from junction box through pole /conduit with all terminals complete all as specified and as directed., s and f singlearmbracketmadeof40mmdia10mtrlong for security light with mounting ms clamp of flat iron size 25x5 mm of suitable length 02 pairs including nut bolts etc of suitable size and painting to ms clamp with two coats of aluminium paints over a coat of red oxide metal primer all as specified and directed by engr in charge, m&l for earthing complete with galvanised steel earth plate electrode size 600 x 600 x 6 mm thick, burried directly in ground, (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised iron strip 32 x 6 mm as earthin lead wire by means of bolts, nuts,, excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soil, returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed., removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil, complete all as specified and as directed., m&l sand cushioning (dry) in trenches for protection of ug cables (below, above and around the ug cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (note . for the purpose of payment, punned thick-ness of sand cushioning only shall be measured and paid ), supply and laying well burnt bricks , locally available best quality (sub class b bricks) laid in trenches perpandicular to u/g cable for cable protection complete all as specified., laying only in trenches or passing through pipe, xlpe insulated, heavy duty, galvanised steel strip or wire armoured electric lt cable with stranded aluminium conductor for 1100 volts grade cross sectional area 50 sqmm 3.5 core. note . cable will be issued under sch b free for laying only, laying only in trenches or passing through pipe, xlpe insulated, heavy duty, galvanised steel strip or wire armoured electric lt cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 4 core. note . cable will be issued under sch b free for laying only, s & f 40 mm high density polyethylene pipe (hdpe) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed ., s&f galvanised iron pipe 40mm bore (dia) light grade for protection of ug cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed., labour only for horizontal boring for passing protection pipe up to 80mm bore (dia), under road /foot path, not exc. 10.00 mtr in a single length, complete all as specified and as directed. note . pipe to be measured separately., m&l for pcc (1.2.4) type b1 (using 20 mm graded aggregate) as in coping for pole including form work and finishing the surfaces even and smooth,dismantling etc complete all as specified and as directed., m&l for pcc 1.3.6 type c2 (using 40 mm graded aggregate) as in foundation for pole etc complete all as specified and as directed., supply and fixing crca sheet steel duly phosphatized and powder coated with 7 tank process,wall/pole mounted/floor mounted,degree of protection ip 54,pre-wired,liberal terminal space,louvers provided on both sides for proper heat heat dissipation,manufactured by an iso 9001 certified company,door locking by panel lock and provided for pad locking available,with auto/manual selection switch,astronomical programmable time switch( operating voltage 220-240 volt ac),three phase,mcb tpn 63 amp(coil voltage 240 volt ac) ,power contactor 65 amp,tp,astronomical timer,terminal blocks,maximun load 12kw, complete all as specified and as directed., fixing only led street light fitting 100 watt 230 v ac outdoor type including necessary connection complete all as specified. note . street light will be issued under sch b free for fixing only., fixing only led flood light fitting 200 watt 230 v ac outdoor type complete all as specified and directed. note . flood light will be issued under sch b free for fixing only.
Agency / Dept :
indian army
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
0
View Documents
T18 Ref No : 16189790
Location : bhesan , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equpipment and machinary steel rule with metric and british graduation , try square , caliper inside spring type , scriber , centre punch , screw driver , chisel cold flat , hammer ballpen with handle , file flat second cut , file flat smooth , file half round 2 nd cut , hacksaw frame fixed type , safety googles , vernier bevel protector blade with acute angle attachments , portable rotory hammer drill electric , file flat bustard , file flat bustard , vernier caliper dial type , machine vice- swiwelbase , power tools for fastning , drill gauges , lifting sling , chipping hammer , hollow punch , crimping tool , rubber mat , wheat stone bridge with galvanometer and battery , potential transformer , solar panel with battery , single phase transformer, core type, air cooled , ceiling fan coil winding machine , primary current injection set , smart meter , ev charger home , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , conduit pipe bending machine, suitable for 15 mm,18 mm, 25 mmand 30 mm pipe , autotransformer 250v - 0 - 300 v,10a , power factor meter 440 v, 20 a, three phase portable box type , solid state solar based single phase energy meter bidirectional 5-30a 240v , magnetic flux meter 0-500 tesla , meter reading instrument mri , solar street light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 60 w led lights and 9 m height pole all dismountable , solar traffic light 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable , solar dc pump 24v, 1 hp , digital multimeter, 150mm, 150 mm blade, 150 mm, 10 mm end,120 mm length, 150 mm flate type, 20 mm x 150 mm hcs, 450 grm, 1lbs, 220 grm, 1/2 lbs, 250 mm, 250mm, 300 mm, -, 26 mm capacity, 200 mm, 100 mm, 125 mm, capacity 10 to 18 mm, letter drill gauge number drill metric drill gauge 1.5 mm to12.5 mm 30 holes, single leg,8 mm nominal dia., 5,6,7 mm etc, 16 sq mm to 95 sq mm, 2ft x 4ft x 1inch, 415 v, 50hz, pt ratio, 440v/110v, 10va, 18 watt, 1 kva , 240-415 v, 50 hz, 250v, 50 hz, 1-ph, with speed control, 220v, 50 hz, 1-ph, output current - 200 a min with timer, 1 phase - smart energy meter 3 phase - smart energy meter, 1 phase input, 0-5,100,200,500milli-amperes 0-150,300,600,v ac-dc
Agency / Dept :
department of employment and training DET
Due Date :
Jul 29, 2026 (1 day left)
Tender Value :
501929
View Documents
T18 Ref No : 16192562
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for led floodlight fixture , 25 w led post top luminaire , 3 metre decorative octagonal steel pole , hdl neon flex light , 10 w led bollard luminaire , underground armoured power cable, 16 sq mm, two core, , miniature circuit breaker, 32 ampere , outdoor junction box , porcelain rewirable fuse unit , moulded case circuit breaker, led floodlight fixture with pressure diecast aluminium housing and highquality integrated led luminaire. fieldstar led floodlight fixture, rated wattage 70 w, system efficacy 120 lumens per watt or higher, system lumen output 8400 lumens. the luminaire shall be of class b serviceability. the luminaire shall be provided with a toughened glass cover and led lens for symmetric wide beam photometry. the led used in the luminaire shall be smd type only. protection rating shall be ip66 and ik07. sdcm shall be less than 5, thd shall be less than 10 percent, cri shall be 70 or higher, and cct shall be 5700 k. protection class i. operating temperature shall be 0 degree celsius to 50 degree celsius. ambient temperature shall be 35 degree celsius. operating voltage shall be 140 v to 270 v ac at 50 hz. led life l70b50 shall be 50,000 hours. the luminaire shall have inbuilt surge protection of 4 kv and an external surge protection device rating of 10 kv. power factor shall be 0.95 or higher. led driver efficacy shall be 85 percent or higher. the luminaire shall comply with iec 60598. the driver shall comply with iec 61347 and bis standards. the luminaire shall have integrated optics to provide a highquality, glarefree lighting system. the light fixture shall have highvoltage and lowvoltage cutoff options. similar to catalogue reference no. bvp281 led085 70 w psu spd, or equivalent., 25 w led post top luminaire made of pressure diecast aluminium housing with integrated poletop mounting and polyester powder coating, in addition to a specific weatherresistant treatment, colour ral 7011. the luminaire shall be provided with a nonyellowing, transparent and textured uvprotected polycarbonate diffuser, 1.5 mm thick, having a circular radial pattern to ensure glarefree and uniform light distribution. the luminaire shall have provision for simplified maintenance through an easytoremove, topopenable driver compartment. the luminaire shall be equipped with a highefficiency, longlife led module using smd led package mounted on mcpcb. the led efficacy shall be 105 lumens per watt or higher at 3000 k colour temperature, with cri of 70 or higher. the luminaire shall be powered by a builtin electronic led driver having thd less than 10 percent, inbuilt surge protection of 4 kv, highvoltage cutoff at 325 v, automatic restart, and other standard protection features. the luminaire shall be suitable for pole mounting on poles having an outside diameter of 60 mm and a mounting height of 6 metres. the fixture lumen output shall be 2700 lumens or higher. the luminaire shall have a minimum protection rating of ip66 without use of glue and ik10, with a power factor of 0.95 or higher. the operating voltage range shall be 120 v to 277 v ac. the average led life l70b50 shall be 50,000 hours. the luminaire manufacturer shall provide an lm79 test report from an nabl or ul accredited laboratory and an lm80 report issued by the led manufacturer. both the luminaire and led driver shall be of the same make and shall possess separate bis approvals. the specification shall be similar to philips townglow bgp300 or equivalent, 3 metre decorative octagonal steel pole, similar to jade 01 or equivalent, having bottom diameter 114 mm and top diameter 60 mm, complete with foundation bolts of size m16 x 450 mm, base plate of size 220 mm x 220 mm x 12 mm, and minimum pole weight 27 kg. the pole shall be hot dip galvanised and suitable for mounting of 25 w led post top luminaire. similar to jade 01 or equivalent., hdl neon flex light, ip65 protection, supplied in 50 metre spool, with 3000 k colour temperature and 120 leds per metre. the diffuser shall be made of pvc and the light shall be complete with suitable led driver and all necessary accessories for installation and operation. the product shall conform to the required technical specifications. similar to specification or equivalent., 10 w led bollard luminaire, suitable for outdoor landscape and pathway lighting, complete with pressure die-cast aluminium housing, high-efficiency led module, integrated electronic led driver, and all necessary mounting accessories. the luminaire shall have a minimum height of 750 mm, protection rating of ip65 or higher, and shall be suitable for continuous outdoor operation. the light shall be available in cool white, neutral white, or warm white as required. the product shall be similar to philips bcp100 led cw nw ww 10 w psu grl 750 mm or equivalent, conforming to the required technical specifications., underground armoured power cable, 16 sq mm, two core, xlpe insulated, with aluminium conductor, suitable for 1100 v grade, complete with inner sheath, galvanised steel armouring, and pvc outer sheath, conforming to is 7098 part 1, with all accessories required for installation. similar to specification or equivalent., miniature circuit breaker, 32 ampere, single pole, c curve, suitable for operation on 230 v ac, 50 hz supply, with a minimum breaking capacity of 10 ka, conforming to is/iec 60898 part 1, complete with all standard accessories for installation. similar to specification or equivalent., outdoor junction box of size 700 mm x 480 mm x 350 mm, fabricated from minimum 1.6 mm thick crca sheet steel or equivalent, powder-coated for corrosion resistance, suitable for outdoor installation. the junction box shall be weatherproof with minimum ip65 protection, complete with hinged lockable door, removable gland plate, mounting arrangement, earthing stud, cable entry provisions, terminal mounting plate, and all necessary hardware for installation. similar to specification or equivalent., porcelain rewirable fuse unit, 100 ampere, 415 v, triple pole, handle operated type, complete with porcelain base and carrier, suitable fuse elements, fixed and moving contacts of high-conductivity metal, insulated operating handle, and all accessories required for safe operation and installation. the fuse unit shall conform to the relevant is standards and be suitable for indoor use. similar to specification or equivalent., moulded case circuit breaker, 100 ampere, four pole, having a minimum breaking capacity of 25 ka at 415 v ac, 50 hz, with thermal magnetic trip unit, suitable for isolation and protection against overload and short circuit. the mccb shall have c curve tripping characteristics, a rated insulation voltage of 690 v or higher, and shall conform to is/iec 60947 part 2. the mccb shall be complete with all standard accessories required for installation and operation. similar to specification or equivalent.
Agency / Dept :
ministry of home affairs MHA
Due Date :
Jul 31, 2026 (3 days left)
Tender Value :
1000000
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16293084
Location : keshod , gujarat
Source : GEM Tenders
LIVE TENDER
tender for ip day night 2 mp fixed bullet camera outdoor , nvr 08 channel with hdd having storage capacity of 30 days , 24 port layer2 managed poe switch with 4 sfp port , work station client pc with 32 inch full hd led display , work station client pc with 43 inch full hd led display , surge protective device spd for lan connection , cat 6 stp lan cable 305 mtrs , rj 45 connectors , pvc cable casing caping of size 50mm x 20mm , laying of 150 meter pvc cable casing caping of size 50mm x 20mm , 3core 1.5 sqmm multi strand pvc insulated pvc sheathed copper conductor power cable , installation, testing , commissioning of cctv system , 9u, 19 inch rack with pdu and fan , 15u, 19 inch rack with pdu and fan , wireless radio system wrs point to point radio with mounting accessories , installation, testing , commissioning of wireless radio system , ip based intelligent master biometric access controller , intelligent slave biometric access controller , smart card reader and exit push button , electromagnetic lock and holding force with power supply , 8 core x 1.0 sq mm multi strand unarmored copper cable , installation, testing , commissioning of biometric access controller system, supply installation testing and commissioning of cctv cam rf links and bacs with 02 years of warranty and 04 years of camc post warranty, ip day night 2 mp fixed bullet camera outdoor as per technical specifications., nvr 08 channel with hdd having storage capacity of 30 days nvr shall be supplied with all accessories including supply of licensed os & antivirus as per specifications., supply of 24 port layer2 managed poe switch with 4 sfp port as per technical specifications, work station client pc with 32 inch full hd led display as per technical specifications, work station client pc with 43 inch full hd led display as per technical specifications, supply & installation of surge protective device spd for lan connection as per technical specifications, supply & laying of cat 6 stp lan cable 305 mtrs as per technical specifications, supply & connecting of rj 45 connectors as per technical specifications, supply of pvc cable casing caping of size 50mm x 20mm, as per technical specifications, laying of pvc cable casing caping of size 50mm x 20mm in wall surface/recess etc., including saddles, u-clamps, joints, bends, gitti, screws, etc. as required., supply and laying of 3core 1.5 sqmm multi strand pvc insulated pvc sheathed copper conductor power cable in conduit or pipe on surface including all accessories terminations etc. as per technical specifications, installation, testing , commissioning of cctv system including laying of conduits, cables, network switches, and configuration of cameras etc., supply and installation of 9u, 19 inch rack with pdu and fan as per technical specification, supply and installation of 15u, 19 inch rack with pdu and fan as per technical specification, supply of wireless radio system wrs point to point radio with mounting accessories as specified in the technical specification., installation, testing , commissioning of wireless radio system as specified in the technical specification., ip based intelligent master biometric access controller with associated software as per specification, intelligent slave biometric access controller as per specifications, smart card reader and exit push button with 50 no of oem programmed unprinter smart cards, electromagnetic lock and holding force with power supply for single door leaf with magnetic contact, supply of 8 core x 1.0 sq mm multi strand unarmored copper cable between every card reader and the access controller, installation, testing , commissioning of biometric access controller system as specified in the technical specification.
Agency / Dept :
airports authority of india AAI
Due Date :
Aug 07, 2026 (10 days left)
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Fixed Led. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Fixed Led sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Fixed Led Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Fixed Led, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Fixed Led Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Fixed Led Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Fixed Led.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Fixed Led depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Fixed Led Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Fixed Led bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Fixed Led. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Fixed Led, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Fixed Led, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Fixed Led?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Fixed Led tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Fixed Led?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Fixed Led, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Fixed Led is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All