sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

15Latest Aluminium sheet polishing machine Tenders List

Latest Aluminium sheet polishing machine Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Aluminium sheet polishing machine tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Aluminium sheet polishing machine tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Aluminium sheet polishing machine Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Aluminium sheet polishing machine tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Aluminium sheet polishing machine Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Aluminium sheet polishing machine Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Aluminium sheet polishing machine Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Aluminium sheet polishing machine tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Aluminium sheet polishing machine Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Aluminium sheet polishing machine sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Aluminium sheet polishing machine tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Aluminium sheet polishing machine tenders.

Is EMD mandatory for all Aluminium sheet polishing machine tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Aluminium sheet polishing machine work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Aluminium sheet polishing machine tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Aluminium sheet polishing machine Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16952779
Location : pune , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for furniture and soft furnishing dinner plate , quarter plate , rice plate , donga and lid , donga without lid , soup bowl with spoon and quarter plate , curry bowl , tea set , cup with saucer , glass stainless steel , glass borosil small , glass borosil large , water glass , water jug borosil , salt and pepper set bc , donga steel , gas stove heavy duty single burner , lemon squasher , pressure cooker 1 , pressure cooker 2 , pressure cooker 3 , kadai hardlium , tawa hardlium , dosa tawa med size , parat ss greaterthan 18 inch , parat ss lessthan 18 inch , sauce pan ss large , sauce pan ss med , fry pan med , jarha ss , tea container 5 ltr cap , vegetable scrapper , potato peeler , kitchen knife set of 04 , milk container ss 5 ltr cap , rice stainer ss , storage container 1 , storage container 2 , storage container 3 , storage container 4 , storage container 5 , storage container 6 , storage container 7 , masala box ss , water bottles , gas lighter , induction cook top , casserole 1 , casserole 2 , degchi aluminium 1 , degchi aluminium 2 , serving trays large , serving trays medium , coaster plates , desert fork , butter knife ss , serving spoon ss , rice spoon ss , desert spoon ss , tea spoon ss , flask 1 ltr ss , full plate , rice plate , donga with lid , soup bowl with spoon and quarter plate , coffee maker , food warmer ss , water purifier with ro system , mixure cum juicer , wet grinder , toaster 4 slice , water dispenser , microwave oven 20 ltr , refrigerator 1 , refrigerator 2 , deep freezer , ice box , garbage bin , rack steel , dining clothes , table mats , emergency light , fly insect killer machine , napkin holder , vegetable cutting , steel almirah 1 , steel almirah 2 , tandoor , bath mug , bath stool , soap case , tooth brush holder , single bed sheet , bed sheet double with 02 pillow , bed cover single , bed cover double , blanket single bed , blanket double bed , pillow foam , quilt 1 , quilt 2 , quilt cover 1 , quilt cover 2 , bath towel , hand towel , mattress , pen stand , slippers , door mat 1 , clothes stand , locks for door , hanger , decorative wall clock , mosquito repllent machine , heat convector-halogen room heater , audio video visual equiment , water flask , artefacts , curtains , wifi point modern , single bed , double bed , bed side table , study table , luggage rack , wardrobe , dressing mirror , bed room chair , notice board , electric iron heavy duty , iron table , key board , shoe shiner- polish machine , first aid kit , washing machine , garden chairs , designer reception counter , revolving and tilting reception chair , dining table , dinning chair , center table , electric gyeser , ceiling fan , exhaust fan 1 , exhaust fan 2 , wall mounted fan, bone china with drdo coloured logo, bone china with drdo coloured logo of approved quality make, bone china with drdo coloured logo of approved quality make, melamine- melmoware, superior qualiity etc all complete with drdo coloured logo., vip tea set bone china with drdo logo set with six cups & saucer bone china with drdo monogram, approved qualiity made in bone china etc all complete with drdo logo coloured, glass stainless steel capacity 300 ml, height 105 mm, outer dia 90 mm all as spd., soft drink glass borosilicate small capacity 210 ml, glass water borosilicate 350ml capacity borosil, water glass medium size make milton, treo or equivalent, water jug borosilicate with lid of capacity 1500-2000 ml of wall thickness 2.8 mm, bone china salt and pepper set with drdo logo, donga steel material stainless steel, height 4 inch, width 8 inch capacity 700ml., gas stove - lpg , no of burner-01, material of body cl, material of nozzle and plug - ss304,, lemon squasher made from high quality food grade stainless steel of size 20x606x4 cm, 7.5 ltr cap hawkins or eqvt, 5.0 1ltr cap hawkins or eqvt, 3.0 1ltr cap hawkins or eqvt, kadai hardlium, tawa hardlium, medium size, parat big size stainless steel of is 5522-1992, outer diameter of parat 528 mm, height of parat 75 mm, parat big size stainless steel of is 5522-1992, outer diameter of parat 400 mm, height of parat 61.5 mm, sauce pan of 19 cm outer diameter, 8 cm height, sauce pan of 18 cm outer diameter, 7.5 cm height, fry pan of 21cm outer diameter, 4.5 cm height, material-ss as per is 5522-1922 thickness-1 mm, length 300 mm dia of pona dish 130150mm, tea containers 5l stainless steel hot water kettle pot, vegetable scrapper stainless steel kadukas size 8 x 10 inch, potato peeler stainless steel body and blade material stainless steel, kitchen knife set of 4 big plain blade, blade stainless steel 304, stainless steel 5 ltr capacity, rice strainer stainless steel dia 300 mm, depth 100 mm, thickness 0.7 mm, storage container ss cap 20 kg with lid, storage container ss cap 10 kg with lid, storage container ss cap 5 kg with lid, storage container ss cap 1 kg with lid, storage container ss cap 2 kg with lid, storage container plastic 2 kg made from high quality food grade plastic, storage container plastic 1 kg made from high quality food grade, masala box stainless steel with lid containing six small bowls for storage of masala condiments, plastic for refrigerator, gas liohter stainless steel 300 mm length, make prestige or eqvt voltage -220-240 volts power 2100 watt, casseroles stainless steel capacity - 2 ltr, casseroles stainless steel capacity - 1 ltr, degchi aluminium 18 inch with lid, degchi aluminium 12 inch with lid, plastic serving tray acrylic of size 500mm x 410 mm x 6 mm, plastic serving tray acrylic of size 335 mm x 210 mm x 6 mm, set of 6 pcs with stand 90-100 mm dia, stainless steel, table knife, type of blade - plain stainless steel, serving spoon stainless steel ss 304, rice spoon stainless steel rice serving spoon features food-grade material, a length of 22 cm to 28 cm, dessert spoons stainless steel ss 304, tea spoons stainless steel ss 304, material - stainless steel 304 ss, capacity 1000 ml, melamine - melmoware, soup bowl with spoon and quarter plate melamine - melmoware, coffee maker espresso coffee machine isi standard, food warmer ss roll top chafing dish 5-6 ltr cap buffet supplies, supply installation of fully automatic ro based water purifier, power 1200-1500 watt material 3 jars ss 304, rpm-18000, type of machine- drum stone roller type wet grinder, 750 watt pop up toaster four slice, type of control- thermostat, voltage -220-240 volts, water dispenser with 10 ltr cap, microwave oven 20 ltr , grill heating power - 201-250watt operating voltage -201-210 volts, refrigerator storage volume-310 ltr, type of door- double, refrigerator storage volume-180 ltr, type of door- single, deep freezer position of door - top opening, storage volume -250 ltr, ice box plastic, garbage bin large plastic 120ltrs with handle, two wheels and lid, rack steel with 3 shelves, dining clothes 2.5m x 1.5m, table mats of size 45x30 cm, emergency light 8 watt led, max emergency illumination time 60 min, length 24-260cm, height 12-14 cm width 12-14 cm, fly insect killer machine double rod make avro wattage 80, operating voltage 220, fibre glass body material, napkin holder stailess steel length 18 cm and height 10.5 cm, vegetable cutting tray plastic chopping board food grade with anti slip mat pad of size 34cm x24 cmx2 mm, large size material of almirah doors ms sheet, small size height 1155 mm+ or - 10 mm, medium size heat fuel lpg, tandoor material outer body stainless steel 304, bath mug 1 ltr of superior qaulity and shade make cello, milton, naysa, bathroom stool, dimension 34 cm x 34 cm x 21 cm, soap case plastic with lid made with tough and durable plastic, tooth brush holder made with 304 stainless steel, single bed sheet with pillow cover of superior quality make bombay deyeing, raymonds, bed sheet double with 2 pillow cover, light colour printed, of size 275x230 cm, bed cover single cotton sateen fabric of size 2.28x1.52 mtr, bed cover double bed of size 2.28x2.28m, supply of heavy duty blanket single size - 230 x152 cm , mass - 700 grm per sqm, blanket double bed size - 230x260cm , mass - 700 grm per sqm, fibre pillow of size 700x 400x170 mm, body fabric cloth plain weaves polyster cotton, quilt size single bedding quilt size 220x150 cm, quilt size double of size 220x240 cm for double bed, quilt cover of single bedding of size 228 cm x 152 cm, quilt cover cotton for double bed of size 228x240 cm, bath towel large size , towel size- 75 cmx 150 cm with max heading or depth 6.5 cm, hand towel bleached white size 60cm x 40cm, mattress double thick 6 inch , mattresses double bed of size 72x72x6 inch, pen stand material- plastic, slippers 2-3 gents, 1-3 ladies polyurethene in sole- anti skid gents size 9,8 and 7 and ladies size 5 and 6, door mat welcome for each room pvc mat of thickness 10-12 mm, door mat cushions soft for toilet doors, cloth dryer stand, made of stainless steel max load 20 kg no of tiers 2, height 58.5cm, brass 5 to 7 leaver locks for door approved make i.e harrison, godrej etc., hanger plastic for cloth garments size 35 centimeter, decorative wall clock approved size and design etc all complete, mosquito repllent machine make -allout- goodnight or techno commercial equivalent, heat convector-halogen room heaterheating element -1200 watt, voltage -230 volts tower type, 32 inch colour smart television led 32 inch fhd of brightness 300-399, reolution pixels 1920x1080,, water flask 500 ml stainless steel make - cello - milton, artefacts 600x600mm, curtains approved quality including polyester lining, top with buckram backing, wifi point modern make -airtel, wooden single bed size 1950 x 930 x 400 mm, wooden double bed size 2050mm x1850mm x 450mm h, bed side table size 450 x 450 x 400mm, study table size 900x525x750mm, luggage rack size 750 x 525 x 450 mm, wardrobe made from 19mm ply with 1mm thick laminate on all surfaces, installation of gents dressing mirror size 525 x 200 x 250 mm, bed room chair with arm rest made out of teakwood frame work, supply and fixing of notice board 4x3 feet made of laminated sheet, electric iron heavy duty electric iron rating 1100 watt, customised iron table size 1050mm x 600mm with top, supply and fixing of key board width of board 600mm colour of cloth red-green height 900mm, shoe shiner- polish machinebody material- ss suitable for- black and brown shoe operating mode sensor, first aid kit ss of size 30 cm x45 cm x12 cm, washing machine semi auto 08 kg capacity make- lg, plastic-garden chairs 2 each room dimensions- h 31.7 x w 22.8 x d 18.5 inch, supply and fixing of designer reception counter of 1050 mm height made out of 18mm, superior quality of size 515 x 515 x 900 mm, supply of 08 seater dining table size 1800 x 1050x750mm made out of teak wood frame, dinning chair size 475 x 400 x 780mm made out of teak wood frame, center table size 1050 x 525 x 450 mm, supply and installation of 15 ltr storage electric gyeser, 1200mm sweep ceiling fan of 230v, 50 hz, single phase 3 star, 200mm pvc exhaust fan of 230 v, 50 hz, single phase anti dust, high speed and low noice copper wounded exhaust fan, 300mm exhaust fan for kitchen of 230v, 50hz, single phase louvers type, high speed and low noice copper wounded exhaust fan, wall mounted fan with 5 speed control of 300mm swing size
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
49.38L
View Documents
T18 Ref No : 16956493
Location : daman , daman and diu
Source : GEM Tenders
LIVE TENDER
tender for regulator , modular 1 way switch 6amp , modular 2 way switch 6amp , modular 1way switch 20amp , modular 5 pin socket 6amp , modular 5 pin socket 16amp , modular plate board all size , modular mcb type 10 amp , modular mcb type 25 amp , casing capping 1 inch , capacitor for ceiling fan 2 5mfd , five in one plug socket 6 amp , hook up wire , screw 15mm , ampere meter 1a analog type , ampere meter 5a analog type , volt meter 500v analog type , hacksaw blade 12 x 18 tpi hss miranda , hacksaw blade 12 x 24 tpi hss miranda , boiler suit , welding hose pipe oxygen cylinder steel wire reinforcement black colour , welding hose pipe acetylene cylinder steel wire reinforcement red colour , hose clamp , wd 40 spray 420 ml , suction service valve outdoor brass 1 2 , suction service valve outdoor brass 5 8 , r 22 refrigerant , r 134a refrigerant , black rubber superlon insulation 5 8 half , heavy duty portable high pressure washer pump 1900w powerful motor max 150 bar 10 l min water flow rate copper motor domestic use for ac cleaning , ac service cleaning cover for split ac indoor unit waterproof service bag kit for washing , manual butane gas brazing blow torch flame gun , butane gas , 1 5 v pencil cell , paint brush 2inch , insulation tape , refrigerator door bulb thread type , refrigerator door bulb clamp type , copper tube 1 2thita , acteylene c2h2 gas , oxygen o2 gas , nitrogen n2 gas , hacksaw blade 12 x 18 tpi hss miranda , hacksaw blade 12 x 24 tpi hss miranda , hacksaw blade 12 alloy , hacksaw machine blade 450 mm x 10 tpi miranda , hack saw frame fixed 300 mm bosch or taparia , s s wire brush 5 rows and 3 rows , safety boots for welders size 7 8 9 10 , black goggles for arc welding , die penetrant testing kit , anti spatter spray can 100 to 300 ml , earth clamp 600a , hacksaw blade 12 hss , emery paper 80 no , power hacksaw blade 450 x 32 x 1 60 mm 10 , ms electrodes mangalam e 6013 3 15 mm , ms electrodes mangalam e 6013 4 00 mm , machine hackshaw blade 14x1 25x0 062 inch , silicon carbide grinding wheel c180l15v o d 200mm i d 31 75mm , aluminum oxide grinding wheel a180l15v o d 200mm i d 31 75mm , lubrication oil 20w40 , hydraulic oil 68 26 liter x 3 can , gear oil 90 5 liter x 4 tin , cotton waste , cleaning brush nylon 100mm , washing powder , dettol soap , safety goggles glass , m s round bar diameter 50mm , m s round bar diameter 40 mm , white urea formaldehyde compression moulding powder 25kg x 1 bag , hydraulic oil grade 68 26 liter x 2 can , emery sand paper sheet 80 grit , emery sand paper sheet 320 grit , acrylic plexiglass sheet cutter scoring knife tool with 10 blades , acrylic sheet pasting glue 20 gm cyanoacrylate adhesive , chlorophome liquid pure 100ml x 2 bottle , m s flat 50mm x 10mm thick kg equi to 5 mtr , hack saw blade size 12 x 1 2 x 0 025 hi speed steel 18 tpi , cotton polishing wheel cloth buffing pad grinding tools size 200 mm , safety shoes , ms round bar 50 mm , aluminum round bar 50 mm , cleaning brush 100 mm , cotton waste , lubricating oil 1 tin 5 liter , file card , grinding wheel carbide , ms round bar 40 mm , aluminium round bar 40 mm , fabric cotton printed , fabric cotton plain , polyester fabric , polyester fabric printed , astar fabric , canvas thin , canvas thick sticky , brown paper , hand needle no 9 , hand needle no 7 , machine needle db 1 no 14 juki machine , machine needle db 1 no 16 juki machine , dressmakers pins , jewelry making instrument sets ,, consumable materials for all trades, pop black screw 15mm, pop black screw 25mm, pop black screw 35mm, three pin plug socket 6a, power plug with box 16a, single way switch piano type 15a, three pin plug socket 15a, single way switch piano type 5a, capacitor for ceilling fan 2 5 mfd, 36 swg cu winding wire, casing capping wirring patti 25 mm, pvc conduit pipe 19 mm, 1 way gang box, flexible pipe 19 mm, modular switch 6a, modular switch 16a, modular regulator 4 step switch type, modular regulator 5 step socket type, 1 sq mm fire resistance cu wire assorted colour, 1 5 sq mm fire resistance cu wire assorted colour, 2 5 sq mm fire resistance cu wire assorted colour, single pole mcb 16a, single pole mcb 20a, single pole mcb 25a, two pole mcb 25a, pvc mcb box 2 pole, regulator 4 step, regulator 5 step, modular socket 6a, 36 swg copper winding wire, aluminum bare conductor 10 swg, 10 s w g bare copper conductor, 20 s w g bare copper conductor, masson drill bit, soldering wire 18 swg 60 40, 3 core cable 1 5 3, 3 core cable 2 5 3, safety belt standard quality, bus bar with brackets 1mtr each, 40 w tube light fitting, 20 w led tube light, polyolefin heat shrinkable sleeves wiring harness size 1mm to 150mm for industrial, ml contactor 25a 3p 415v ac in built 2no 2nc ac 3 220v ac coil 50 hz, lrd thermal overload relays 7 10 a class 10a, analog timer for star delta statr 800sd 2 230vac size 22 5mm, proxmitey sensor 180mm sensing rang 06 mm, black waterproof outdoor motion sensor sensor detector use with lights for night sensor module, tandem dynamometer metarvi st 09 socket polarity tester for industrial, taparia 27 pcs square drive hex socket set s 11hxl, lcr p1 multifunction transistor capacitor tester, smart celling fan wall switch, modular smart regulator, modular 1 way switch 6amp, modular 2 way switch 6amp, modular 1way switch 20amp, modular 5 pin socket 6amp, modular 5 pin socket 16amp, modular plate board all size, modular mcb type 10 amp, modular mcb type 25 amp, casing capping 1 inch, capacitor for ceiling fan 2 5mfd, five in one plug socket 6 amp, hook up wire, screw 15mm, ampere meter 1a analog type, ampere meter 5a analog type, volt meter 500v analog type, hacksaw blade 12 x 18 tpi hss miranda, hacksaw blade 12 x 24 tpi hss miranda, boiler suit, welding hose pipe oxygen cylinder steel wire reinforcement black colour, welding hose pipe acetylene cylinder steel wire reinforcement red colour, hose clamp, wd 40 spray 420 ml, suction service valve outdoor brass 1 2, suction service valve outdoor brass 5 8, r 22 refrigerant, r 134a refrigerant, black rubber superlon insulation 5 8 half, heavy duty portable high pressure washer pump 1900w powerful motor max 150 bar 10 l min water flow rate copper motor domestic use for ac cleaning, ac service cleaning cover for split ac indoor unit waterproof service bag kit for washing, manual butane gas brazing blow torch flame gun, butane gas, 1 5 v pencil cell, paint brush 2inch, insulation tape, refrigerator door bulb thread type, refrigerator door bulb clamp type, copper tube 1 2thita, acteylene c2h2 gas, oxygen o2 gas, nitrogen n2 gas, hacksaw blade 12 x 18 tpi hss miranda, hacksaw blade 12 x 24 tpi hss miranda, hacksaw blade 12 alloy, hacksaw machine blade 450 mm x 10 tpi miranda, hack saw frame fixed 300 mm bosch or taparia, s s wire brush 5 rows and 3 rows, safety boots for welders size 7 8 9 10, black goggles for arc welding, die penetrant testing kit, anti spatter spray can 100 to 300 ml, earth clamp 600a, hacksaw blade 12 hss, emery paper 80 no, power hacksaw blade 450 x 32 x 1 60 mm 10, ms electrodes mangalam e 6013 3 15 mm, ms electrodes mangalam e 6013 4 00 mm, machine hackshaw blade 14x1 25x0 062 inch, silicon carbide grinding wheel c180l15v o d 200mm i d 31 75mm, aluminum oxide grinding wheel a180l15v o d 200mm i d 31 75mm, lubrication oil 20w40, hydraulic oil 68 26 liter x 3 can, gear oil 90 5 liter x 4 tin, cotton waste, cleaning brush nylon 100mm, washing powder, dettol soap, safety goggles glass, m s round bar diameter 50mm, m s round bar diameter 40 mm, white urea formaldehyde compression moulding powder 25kg x 1 bag, hydraulic oil grade 68 26 liter x 2 can, emery sand paper sheet 80 grit, emery sand paper sheet 320 grit, acrylic plexiglass sheet cutter scoring knife tool with 10 blades, acrylic sheet pasting glue 20 gm cyanoacrylate adhesive, chlorophome liquid pure 100ml x 2 bottle, m s flat 50mm x 10mm thick kg equi to 5 mtr, hack saw blade size 12 x 1 2 x 0 025 hi speed steel 18 tpi, cotton polishing wheel cloth buffing pad grinding tools size 200 mm, safety shoes, ms round bar 50 mm, aluminum round bar 50 mm, cleaning brush 100 mm, cotton waste, lubricating oil 1 tin 5 liter, file card, grinding wheel carbide, ms round bar 40 mm, aluminium round bar 40 mm, fabric cotton printed, fabric cotton plain, polyester fabric, polyester fabric printed, astar fabric, canvas thin, canvas thick sticky, brown paper, hand needle no 9, hand needle no 7, machine needle db1 no 14 juki machine, machine needle db 1 no 16 juki machine, dressmakers pins, jewelry making instrument sets, bobbins full shuttle, colour thread, hand needle darner no 12, elastic 38mm 1 elastic single thread 2, color pencil stadler, coloring brush 00 01 2 coloring brush flat 4, tailor s chalk, water color set poster color set, stadler pencil color, zip 18, machine needle no 16 half shuttle, thimble, suiting material pant, butter crepe, canvas for embroidery, satin fabric, astar, butter crepe, crepe plain, canvas thick canvas thin brown paper, hand needle no 7 hand needle no 9, bobbins full shuttle bobbin case full shuttle, machine needle db 1 no 14 juki machine, machine needle db 1 no 16 juki machine, color thread, elastic 12 mm elastic 25 mm brass hooks brass hook, elastic 5 mm, tailor s chalk, machine needle no 14 half shuttle, dressmakers pin, suiting material pant, machine oil, gear oil 75 w 80 brake fluid dot 3 4 5 1 oil filter 16510 65l 10 l 034, radiator coolant green, butane gas can 220 ml, desulfon battery life extender additives 300 ml, grinding and lapping compound 450 gms power steering fluid 450ml
Agency / Dept :
ministry of skill development and entrepreneurship MSDE
Due Date :
Sep 15, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16975971
Location : east khasi hills , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for purchase of furniture maint stores misc items for the qe sep 2026 under ge i af shillong cushion for sofa set 5 seater 32 density 21inch x 22inch x4inch , rexene cloth 5ft width , cloth tapestry 48inch wide , lock for almirah large steel , foam 4inch x 6ft x 3ft 32mm density , chapra , hydraulic pump for chair revolving , synthetic resign adhesive fevicol , seat and back for chair revolving high back , sheet cushioned foam 35x72x3inch warranty 1 year , seat and back for computer chair , foam 2inch x 6ft x 3ft 32 mm density , spirit asin , dendrite one ltr container , thinner , wooden design beading 18mm x 6mm x 6ft , touch wood 04 ltr cont , ms lock 50mm 6 lever with duplicate key for almirah locker steel 04 pin round key , cloth malmal 48inch wide. , base for chair revolving high back , drawer lock brass suitable for wooden table computer table , pvc back for chair varandah , pvc seat for chair varandah , nylon newer pvc for varanda chair gi charpoy , telescopic drawer channel 16inch long of superior quality , telescopic drawer channel 12inch long of superior quality , telescopic drawer channel 18inch long of superior quality , unbranded aloxide 60 emery cloth plane wave roll with , unbranded sheet cushioned foam 36x72x1inch warranty 1 year , max 5 litre gum spirit of turpentine oil , lakhdana , wheel for chair revolving , french polish , ms lock 50mm 6 lever with duplicate key for almirah locker steel 04 pin flat key , telescopic drawer channel 14inch long of superior quality , cotton quilted cloth gsm 175 , seat for chair steel tubular with arms size 450 x 420 mm , drill bit for iron5 pieces 4mm, 6mm, 8mm,10mm and 12mm , handle for chair revolving high back , chromium plated ms handle 115 mm , wooden flat beading 18mmx6mmx6ft , wood wooden beading patti lenghth 1.5-2.0 meter , natural wood wooden beading patti, lenghth 1.5-2.0 mete , haps and staple 100mm isi marked alum , back for chair steel tubular warms size 450 x 380 mm , drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm , handle for computer chair , aluminium sheet for table dinning width and length 3 x 5 ft and 1mm thick , foam 0.5inch x 6ft x3ft 32 mm density , powder for french polish , ms lock 50mm 6 lever with duplicate key for almirah locker steel 02 pin flat key , nails wire 2inch 50 mm , nails wire 1inch 25 mm , nails wire 3inch 80 mm , nails wire 1.5inch 40 mm , glueing abrasive paper for polishing machine , nails wire 2.5inch 60 mm , nails 6inch , nails wire 4inch 100 mm , nails 5inch , stapler pin for punching machine, cushion for sofa set 5 seater 32 density 21inch x 22inch x4inch, rexene cloth 5ft width, cloth tapestry 48inch wide, lock for almirah large steel, foam 4inch x 6ft x 3ft 32mm density, chapra, hydraulic pump for chair revolving, synthetic resign adhesive fevicol, seat and back for chair revolving high back, sheet cushioned foam 35x72x3inch warranty 1 year, seat and back for computer chair, foam 2inch x 6ft x 3ft 32 mm density, spirit asin, dendrite one ltr container, thinner, wooden design beading 18mm x 6mm x 6ft, touch wood 04 ltr cont, ms lock 50mm 6 lever with duplicate key for almirah locker steel 04 pin round key, cloth malmal 48inch wide., base for chair revolving high back, drawer lock brass suitable for wooden table computer table, pvc back for chair varandah, pvc seat for chair varandah, nylon newer pvc for varanda chair gi charpoy, telescopic drawer channel 16inch long of superior quality, telescopic drawer channel 12inch long of superior quality, telescopic drawer channel 18inch long of superior quality, unbranded aloxide 60 emery cloth plane wave roll with, unbranded sheet cushioned foam 36x72x1inch warranty 1 year, max 5 litre gum spirit of turpentine oil, lakhdana, wheel for chair revolving, french polish, ms lock 50mm 6 lever with duplicate key for almirah locker steel 04 pin flat key, telescopic drawer channel 14inch long of superior quality, cotton quilted cloth gsm 175, seat for chair steel tubular with arms size 450 x 420 mm, drill bit for iron5 pieces 4mm, 6mm, 8mm,10mm and 12mm, handle for chair revolving high back, chromium plated ms handle 115 mm, wooden flat beading 18mmx6mmx6ft, wood wooden beading patti lenghth 1.5-2.0 meter, natural wood wooden beading patti, lenghth 1.5-2.0 mete, haps and staple 100mm isi marked alum, back for chair steel tubular warms size 450 x 380 mm, drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm, handle for computer chair, aluminium sheet for table dinning width and length 3 x 5 ft and 1mm thick, foam 0.5inch x 6ft x3ft 32 mm density, powder for french polish, ms lock 50mm 6 lever with duplicate key for almirah locker steel 02 pin flat key, nails wire 2inch 50 mm, nails wire 1inch 25 mm, nails wire 3inch 80 mm, nails wire 1.5inch 40 mm, glueing abrasive paper for polishing machine, nails wire 2.5inch 60 mm, nails 6inch, nails wire 4inch 100 mm, nails 5inch, stapler pin for punching machine
Agency / Dept :
indian army
Due Date :
Sep 04, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17029215
Location : deesa , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tender for supply of raw materials for iti boq1 aa cell recharge holder , ac service valve 0.5 inch, 0.25 inch, 0.625 inch , adjustable hose clamp assorted values , adjustable voltage regulator lm 338 with pass transister , aluminium borox flux 100 gram , aluminium brazing rod 1.6 mm x 300 mm , aluminium pipe 0.25 inch , auto car circuit testor lamp 6 to 24 volt , bare alluminium wire 08 swg , bare alluminium wire 35 swg , bare aluminium wire 18 swg , battery 09 volt , bi-metal with fuse for refrigerator , black spray paint 400 ml for vehicle body , bobin full thread with case completer set , brake bleeding screw m8 x 1.25 mm , brass union 0.25 inch , brazing tourch , breadboard 410 point , bridge rectifier 6 amp 600 volt , brown paper 27 x 40 inch for tailoring purpose , butter paper , cable gland 32 sq mm pvc , capacitor 0.1 mfd 100 volt bypass type , capacitor 02 mfd , capacitor 10 mfd 230 volt , capacitor 100 mfd 25 volt , capacitor 100 mfd ceramic type , capacitor 1000 mfd 50 v , capacitor 45 mfd 230 volt , capacitor 50 mfd 230 volt , capacitor 55 mfd 230 volt , capacitor 6800 mfd 50 volt filter type , car trim button , car washing shampoo , car wind shield fluid 500 ml , carbon resistor 1kohm 0.5 watt , carbon resistor 33 kohm, 22 kohm, 62 kohm , cell for gas leak detector , chart paper 22 x 30 inch , conditioner 500 ml , conduite pipe 19 mm black metal , conduite pipe 19 mm pvc , conduite pipe 25 mm black metal , conduite pipe coupling 19 mm black metal , cooling fan 12 v dc 80 mm , copper brazing rod 1.6 mm , copper tube0.25 inch , cotton ruu 200 gram , cream wax , crimping ferrules 10 amp , crimping ferrules 16 amp , crimping ferrules 4mm x 10mm long , crimping spade lug 6 amp 4-6 mm , current coil relay , current limit potentiometer 1kohm , current sense resistor 0.22 ohm 5 watt , dc bulb with holder 06 watt, 21 watt, 35 watt 12 volt , dead cap 0.5 inch, 0.25 inch, 0.625 inch , defrost heater for refrigerator , diode n 914 , dro-spring 10 mtr , elastic 0.25 inch , electrolytic capacitor 1,2,4,8 mfd 400 volt , electronic sequention control circuit 04 chanel , engineer file handle , fabric glue 200 gram , ferrule 50 sq mm aluminium , filament lamp 10 watt 12 volt with holder , filter drier for refrigerator , fire alarm circuit kit , first aid kit , flourscent tube set , fuel injector for fiat engine , fuse 2 amp 510 watt blow plus holder , g.i pipe 12.7 mm , g.i pipe 19 mm dia , g.i sheet 0.5 mm x 08 x 04 sq feet , g.i wire 14 swg , g.i wire 8 swg , graphite dry lubricant spray grade 2012-3009 , hair oil , hammer handle , hand sewing needle pack of 25 pcs , hand wash 250 ml , hdmi cable , heat detector , heat sink , heating rod 500 watt , hook for blouse pack of 100 , hook wire , hpmv lamp complete set 150 watt , hpsv lamp complete set 150 watt , hss drill bit 7 to 9 in 0.5 mm step , huter,saiyaran 24 volt , inductor 4.7 micro h , justi khilla 02 inch , lamp 100 watt , lamp 200 watt , lamp 40 watt , lamp 60 watt , lan pach code for cat-6 cable , lapping paste 100 gram , led lamp holder with pvc cap , liquid car polish , lpg tin 225 gram , m.s angle 55 x 55 x 08 mm , m.s channel mc 75 mm , m.s pipe 0.25 inch , m-16 nut bolt with washer acme thread , machine needle for gaj sewing machine pack of 10 , machine needle for over lock machine pack of 10 , metal enclosure box 168 x 86 x 138 mm , metal helide lamp 150 watt complete set , mineral oil 500 ml , modular indicator 6 amp 240 volt , modular intermediate switch 10 amp , modular kit- kat fuse 16 amp 240 volt , modular kit-kat fuse 6 amp 240 volt , modular lamp holder 6 amp angle type , modular lamp holder 6 amp batten type , modular socket 6 amp two pin , mscc filler rod 1.6 mm , m-seal 500 gram , nrv 0.25 inch for refrigerator , oil filter for alto 800 , oil seal for hydraulic trolly floor type jack 3 ton , olp for refrigerator , output capacitor 470 mfd 50 volt , overload relay 30 amp , pankaj servo pot ss-50 10 kohm , paper cutter , pavan multiturn potentiometer model 2010 india 396001 j213 , payjama mori canvas roll 1 inch x 25 mtr , pcb 4 x 6 inch , piping cord roll , poe oil 500 ml , potentiometer 100 kohm , power adapter , push button 6 amp nc type , push button 6 amp no type , puss transister 2 x 2n3055 , pvc box 100 x 100 mm , pvc casing caping 20 x 12 mm , pvc casing caping 25 x 10 mm , pvc insulated aluminium wire 1 by 18 swg solid , pvc insulated aluminium wire 3 by 20 swg solid , pvc insulated aluminium wire 7 by 20 swg solid , rcc drill bit 1-6 mm , rechargeble aa cell , refrigerant charging line r-134 02 mtr , refrigerant charging line r-22 02 mtr , refrigerant charging line r-32 02 mtr , refrigerant charging line r-410a 02 mtr , refrigerator bulb 3v , refrigerator door switch, aa cell recharge holder, ac service valve 1/2 inch 1/4 inch 5/8 inch, (8-12 mm 10-16 mm, 13-19 mm, 16-25 mm, 25-33 mm, 22-32 mm, 19-29 mm), adjustable voltage regulator lm 338 with pass transister, aluminium borox flux 100 gram, aluminium brazing rod 1.6 mm x 300 mm, aluminium pipe 0.25 inch, auto car circuit testor lamp 6 to 24 volt, bare alluminium wire 08 swg, bare alluminium wire 35 swg, bare aluminium wire 18 swg, battery 09 volt, bi-metal with fuse for refrigerator, black spray paint 400 ml for vehicle body, bobin full thread with case completer set, brake bleeding screw m8 x 1.25 mm, brass union 0.25 inch, brazing tourch, breadboard 410 point, bridge rectifier 6 amp 600 volt, brown paper 27 x 40 inch for tailoring purpose, butter paper, cable gland 32 sq mm pvc, capacitor 0.1 mfd 100 volt bypass type, capacitor 02 mfd, capacitor 10 mfd 230 volt, capacitor 100 mfd 25 volt, capacitor 100 mfd ceramic type, capacitor 1000 mfd 50 v, capacitor 45 mfd 230 volt, capacitor 50 mfd 230 volt, capacitor 55 mfd 230 volt, capacitor 6800 mfd 50 volt filter type, car trim button ( fender clip lock/ plastic retainer clip), car washing shampoo, car wind shield fluid 500 ml, carbon resistor 1kohm 0.5 watt, carbon resistor 33 kohm, 22 kohm, 62 kohm, cell for gas leak detector, chart paper 22 x 30 inch, conditioner 500 ml, conduite pipe 19 mm black metal, conduite pipe 19 mm pvc, conduite pipe 25 mm black metal, conduite pipe coupling 19 mm black metal, cooling fan 12 v dc 80 mm, copper brazing rod 1.6 mm, copper tube0.25 inch, cotton ruu 200 gram, cream wax, crimping ferrules 10 amp, crimping ferrules 16 amp, crimping ferrules 4mm x 10mm long, crimping spade lug 6 amp 4-6 mm, current coil relay, current limit potentiometer 1kohm, current sense resistor 0.22 ohm 5 watt, dc bulb with holder 06 watt, 21 watt, 35 watt 12 volt, dead cap 1/2 inch, 1/4 inch, 5/8 inch, defrost heater for refrigerator, diode n 914, dro-spring 10 mtr, elastic 0.25 inch, electrolytic capacitor 1,2,4,8 mfd 400 volt, electronic sequention control circuit 04 chanel, engineer file handle, fabric glue 200 gram, ferrule 50 sq mm aluminium, filament lamp 10 watt 12 volt with holder, filter drier for refrigerator, fire alarm circuit kit, first aid kit, flourscent tube set (tube,stick, side holder with body), fuel injector for fiat engine (i.w.p-064), fuse 2 amp 510 watt blow plus holder, g.i pipe 12.7 mm, g.i pipe 19 mm dia, g.i sheet 0.5 mm x 08 x 04 sq feet, g.i wire 14 swg, g.i wire 8 swg, graphite dry lubricant spray grade 2012-3009, hair oil, hammer handle, hand sewing needle pack of 25 pcs, hand wash 250 ml, hdmi cable, heat detector, heat sink (large alumi), heating rod 500 watt, hook for blouse pack of 100, hook wire, hpmv lamp complete set 150 watt (lamp,choke,holder,ignitor), hpsv lamp complete set 150 watt (lamp,choke,holder,ignitor), hss drill bit 7 to 9 in 0.5 mm step, huter/saiyaran 24 volt, inductor 4.7 micro h, justi khilla 02 inch, lamp 100 watt, lamp 200 watt, lamp 40 watt, lamp 60 watt, lan pach code for cat-6 cable (cap), lapping paste 100 gram, led lamp holder with pvc cap, liquid car polish, lpg tin 225 gram, m.s angle 55 x 55 x 08 mm, m.s channel mc 75 mm, m.s pipe 0.25 inch, m-16 nut bolt with washer acme thread, machine needle for gaj sewing machine pack of 10, machine needle for over lock machine pack of 10, metal enclosure box 168 x 86 x 138 mm, metal helide lamp 150 watt complete set (lamp,balast,holder), mineral oil 500 ml, modular indicator 6 amp 240 volt, modular intermediate switch 10 amp, modular kit-kat fuse 16 amp 240 volt, modular kit-kat fuse 6 amp 240 volt, modular lamp holder 6 amp angle type, modular lamp holder 6 amp batten type, modular socket 6 amp two pin, mscc filler rod 1.6 mm, m-seal 500 gram, nrv 0.25 inch for refrigerator, oil filter for alto 800, oil seal for hydraulic trolly (floor) type jack 3 ton, olp for refrigerator, output capacitor 470 mfd 50 volt, overload relay 30 amp, pankaj servo pot ss-50 10 kohm, paper cutter, pavan multiturn potentiometer model 2010 india 396001 j213, payjama mori canvas roll 1 inch x 25 mtr, pcb 4 x 6 inch, piping cord roll, poe oil 500 ml, potentiometer 100 kohm, power adapter, push button 6 amp nc type, push button 6 amp no type, puss transister 2 x 2n3055, pvc box 100 x 100 mm, pvc casing caping 20 x 12 mm, pvc casing caping 25 x 10 mm, pvc insulated aluminium wire 1/18 swg solid, pvc insulated aluminium wire 3/20 swg solid, pvc insulated aluminium wire 7/20 swg solid, rcc drill bit 1-6 mm, rechargeble aa cell, refrigerant charging line r-134 02 mtr, refrigerant charging line r-22 02 mtr, refrigerant charging line r-32 02 mtr, refrigerant charging line r-410a 02 mtr, refrigerator bulb 3v, refrigerator door switch, resistor 470 ohm 1/2 watt, resistor assorted values pack of 100, rg-6 cable connector, rivet flat head, s.s pipe 0.25 inch, satin cloth, shiner bleach 500 ml, silicon lubricant spray, silk threads for embroidery, silver brazing rod 1.6 mm, single pin ptc relay, smoke detector, smps 12 volt dc, sodium vapor lamp 150 watt complete set (lamp,choke,holder), solar cell 150 ma 06 volt, solar crystaline module 05 watt, solar crystaline module 10 watt, stapler gun, stone carborundum 150 x 50 x 25 sq mm (silicon carbide combination stone), super enamelled copper wire 22 swg 300 gram, tailors chalk pack of 10, thermal paste 30 gram, thermostate for refrigerator, thinner, three pin ptc relay, throttle body cleaner 500 ml, timer switch for refrigerator, transformer 230/6 v, transformer 230/6-0-6 v 500 ma, transformer 3 a (step down 230 v ac to 24 v ac), transistor bc 547, tubelight choke 40 watt, v belt (a-1255 lp/a48, a900a34, a900lp/a31, a26, b810b30, b810b31,, vehicle washing cloth, vehicle washing duster, voltage adjust potentiometer 5 kohm multi turn, voltage relay, wax strips pack of 25 strips, welding cable connector 600 amp, welding cable lug 600 amp copper, wheel balancing weight 05 to 50 gram, wi-fi adapter usb type, wire wound resistor 100 ohm 1.5 a, 500 ohm 1/2 a
Agency / Dept :
department of employment and training DET
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
1.85L
View Documents
T18 Ref No : 16683143
Location : hyderabad , telangana
Source : GEM Tenders
corrigendum tender for each , screws for wood length 1 point 5 inches 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 inches dia 2mm 4mm 200 each , grease nipples 10mm 12mm , teflon thread seal tape standard size , file flat size 200mm 300mm , file round size 200mm 300 mm , file semi round size 200mm 300mm , centre punch metal , hollow punch set , chisel metal flat round , chisel wood with wooden handle , araldite tubes 50ml , rubber solution dendrite 500ml , fevicol wood adhesive 500ml , chalk piece box white , disposable overall x xl xxl for stp , health faucet as per sample , double connector hose for bathroom fittings as per sample , taps for wash basin hot water cold water as per sample , shower heads as per sample , shower mixer set as per sample , grease general purpose , drawer locks as per sample , hinges 2 inches 3 inches 4 inches ss , drawer handles as per sample , drawer knobs as per sample , tower bolts ss 2 inches 3 inches 4 inches , pad locks with 03 keys , coat hooks , self taping screw j hook ss 12mm 20mm 25mm 30mm , silicon tubes , silicon gun , glue gun , impact wrench bosch battery operated , screw driver sets , pliers medium size , adjustable spanner medium large , pipe wrench medium large , rivet gun , hammer small medium large , anchor flags port and stbd 20x20inch , bollas line 173 mtrs 4 mm , anchor cable chain hook 115cm x 10 mm , cloth 4 bye 2 for gun cleaning 10m x 4 inch , hand botha 1 point 5 x1 feet , dishwashing juite wire gala scrub , gashbag polythene 61 cm x 81cm medium , gashbag polythene 76 cm x 94cm large , gashbag rolls small 43 cm x 48cm , ground sheet 4x3 feet canvas grey , mousing wire 100 mtr , mug plastics with handle , natural juite twine 300 mtr for packing , polish mettal brasso 200ml each , wood polish warnish asian paints 500ml each , hammer 5kg weight with handle , chopper blade length 18 cm , crow bar 1m , crow bar 1 point 5 m , chipping scrubber , chipping hammer , torch medium ibell 28x12x7cm , chemistk light red , chemistk light yellow , chemistk light green , ear plugs generic soft foam corded orange 3m , hand gloves cotton with pvc dots , bosch gws 600 buffing machine , bosch gws 600 buffing machine wheel , wd 40 antirusht spray 341 gm each , grease lg 280 2 kg each , foot mat 1x1 mtr spungy anti skid , door step met 0 point 8x0 point 5 mtr spungy anti skid , ncml solution , cross bar brass stand for table flag , sharp shooter for cleaning of bulkhead floor , deck cleaning plastic brush with stick , deck cleaning mop squzer , deck cleaning wiper , deck mat grating red blue black , acrylic name tally , digital room thermometer , allen bolts m3 , allen bolts m4 , allen bolts m5 , allen bolts m6 , allen bolts m8 , allen bolts m10 , allen bolts m12 , allen bolts m16 , allen bolts m20 , allen bolts m24 , hv rubber mats , stainless bonding straps , braided wire bonding straps , steel db lock , panel lock , rubber shock mounts , lenolium sheet , digital thermometer portable for room temp humidity , velcro 2 inches wide , rope 08 mm pp , pulley for 08 mm rope brass , d shackel 8 mm with screw pin stainless steel , hose securing box for weather deck h 56cm l 56cm w 14cm , hose securing box for between decks h 90cm l 54cm w 30cm , stickers for 9 ltr afff 15cm x 15cm , stickers for 2kg co2 15cm x 15cm , stickers for 10kg dcp 15cm x 15cm , stickers for elsa 15cm x 15cm , stickers for bascca 15cm x 15cm , stickers for dc post fwd and aft 15cm x 15cm , stickers for dd, hardware1, gloves leather white 12 inch palm length adjustable size, gloves rubber long adjustable size heavy duty chemical resistant, gloves anti cut with high grip adjustable size breathable 5 layer protection, grinding wheel bosch metal 125mm grinding wheel set, cutting wheel bosch metal 125mm cutting wheel set, wire brush bosch 125mm wire brush set, buffing wheel bosch 125mm, grinding wheel bosch metal 7 inch grinding wheel set, wire brush bosch metal 7 inch wire brush, drill bits hss 2mm 3 point 5mm 4mm 4 point 5mm 6mm 8mm 10mm, drill bits for wood 2mm 3.5mm 4mm 4.5mm 6mm 8mm 10mm, bi metal hole saw set 20mm to 50 mm, high performance putty 1 kg packets, m seal 250 g packets, jubilee clip size 1 inches, jubilee clip size 2 inches, jubilee clip size 3 inches, jubilee clip size 4 inches, jubilee clip size 5 inches, jubilee clip size 6 inches, loctite o ring kit as per sample, measuring tape 5 10 30 and 50 mtr 2 each, neoprene rubber sheet 5mm thick x1m wide x1m length, oil absorbent pad 19 inches x 15 inches pack of 100, oil absorbent sweep high absorbing capacity durable, plastic funnel small medium large, ratchet screw driver set bosch or other recognised brands, ratchet socket set bosch or other recognised brands, ratchet square drive socket set bosch or other recognised brands, pop rivets aluminium and ss 2mm 4mm 6mm 100 each, safety goggles anti glare securing straps and face adequately covered, sampling bottles for hydraulic oil and lub oil 250ml, sand paper emery paper abressive paper 23x28 cms, screws metal ss star head length 1 point 5 inches 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 inches dia 2mm 4mm, screws self taping metal ss star head length 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 dia 2mm 4mm, screws for wood length 1 point 5 inches 1 inches 1 half 2 inches 1 half 4 inches 3 half 8 inches 5 half 8 inches dia 2mm 4mm, grease nipples 10mm 12mm, teflon thread seal tape standard size, file flat size 200mm 300mm, file round size 200mm 300 mm, file semi round size 200mm 300mm, centre punch metal, hollow punch set, chisel metal flat round, chisel wood with wooden handle, araldite tubes 50ml, rubber solution dendrite 500ml, fevicol wood adhesive 500ml, chalk piece box white, disposable overall x xl xxl for stp, health faucet as per sample, double connector hose for bathroom fittings as per sample, taps for wash basin hot water cold water as per sample, shower heads as per sample, shower mixer set as per sample, grease general purpose, drawer locks as per sample, hinges 2 inches 3 inches 4 inches ss 20 each, drawer handles as per sample, drawer knobs as per sample, tower bolts ss 2 inches 3 inches 4 inches, pad locks with 03 keys, coat hooks, self taping screw j hook ss 12mm 20mm 25mm 30mm, silicon tubes, silicon gun, glue gun, impact wrench bosch battery operated, screw driver sets, pliers medium size, adjustable spanner medium large, pipe wrench medium large 2 each, rivet gun, hammer small medium large 3 each, anchor flags port and stbd 20x20inch, bollas line 173 mtrs 4 mm, anchor cable chain hook 115cm x 10 mm, cloth 4 bye 2 for gun cleaning 10m x 4 inch, hand botha 1 point 5 x1 feet, dishwashing juite wire gala scrub, gashbag polythene 61 cm x 81cm medium, gashbag polythene 76 cm x 94cm large, gashbag rolls small 43 cm x 48cm, ground sheet 4x3 feet canvas grey, mousing wire 100 mtr, mug plastics with handle, natural juite twine 300 mtr for packing, polish mettal brasso 200ml each, wood polish warnish asian paints 500ml each, hammer 5kg weight with handle, chopper blade length 18 cm, crow bar 1m, crow bar 1 point 5 m, chipping scrubber, chipping hammer, torch medium ibell 28x12x7cm, chemistk light red, chemistk light yellow, chemistk light green, ear plugs generic soft foam corded orange 3m, hand gloves cotton with pvc dots, bosch gws 600 buffing machine, bosch gws 600 buffing machine wheel, wd 40 antirusht spray 341 gm each, grease lg 280 2 kg each, foot mat 1x1 mtr spungy anti skid, door step met 0 point 8x0 point 5 mtr spungy anti skid, ncml solution, cross bar brass stand for table flag, sharp shooter for cleaning of bulkhead floor, deck cleaning plastic brush with stick, deck cleaning mop squzer, deck cleaning wiper, deck mat grating red blue black, acrylic name tally, digital room thermometer, allen bolts m3, allen bolts m4, allen bolts m5, allen bolts m6, allen bolts m8, allen bolts m10, allen bolts m12, allen bolts m16, allen bolts m20, allen bolts m24, hv rubber mats, stainless bonding straps, braided wire bonding straps, steel db lock, panel lock, rubber shock mounts, lenolium sheet, digital thermometer portable for room temp humidity, velcro 2 inches wide, rope 08 mm pp, pulley for 08 mm rope brass, d shackel 8 mm with screw pin stainless steel, hose securing box for weather deck h 56cm l 56cm w 14cm, hose securing box for between decks h 90cm l 54cm w 30cm, stickers for 9 ltr afff 15cm x 15cm, stickers for 2kg co2 15cm x 15cm, stickers for 10kg dcp 15cm x 15cm, stickers for elsa 15cm x 15cm, stickers for bascca 15cm x 15cm, stickers for dc post fwd and aft 15cm x 15cm, stickers for dd pump, ba compressor portable eductor ss pump 20tph ss pump 40tph 15cm x 15cm, fluorescent green tape, fluorescent red tape, wheel spanner for ship allowance portable extinguisher
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16159661
Location : pune , maharashtra
Source : GEM Tenders
tender for provision of misc br items - tower bolts (non-ferrous metals) v2 as per is 204 (q2) , ewc , plywood , particle board , tarpaulin , heat shrink joint , glass plain , alum , copper sulphate , sundras , turpentine oil , lakhdana , cloth , thinner , putty , wood screw , paint enamel , fevicol , wood polish , plastuc surface box , pvc casing caping , pvc coupler , pvc elbow , pvc tee , pvc bend , pvc box , dwc pipe , ppr pipe , ppr couple , ppr elbow , ppr tee , ppr reducer , ppr reducer tee , slip on , flange , plain union , tee , clamp , plug , connector , elbow , gate valve , ball valve , bend , end cap , pvc conduit pipe , sluice valve , star delta starter , tcca 90 , calcium hypochlorite , castic soda , pvc seat back , pvc seat , manhole cover , exhaust fan , pedastal fan , galvanised sheet , aluminium sheet , glass frosted , xlpe armoured cable , bracket , bush cutter, ewc p type, plywood 8x4x12mm bwr, plywood 8x4x9mm bwr, plywood 8x4x1819mm bwr, plywood 8x4x10mm bwr, plywood 8x4x4mm bwr, plywood 8x4x6mm bwr, plywood 7x3x12mm bwr, particle boardmdf board 8x4x12mm one side teak face, tarpaulin hd 200gsm 30 inch x 40 inch, heat shrink straight through joint for 3core 120sqmm 11kv, heat shrink straight through joint for 3core 95sqmm 11kv, glass plain 1200x1200x3mm, ferric alum, ferric alum crystal, copper sulphate, sundras polish, gum spirit oil, lakhdana, cloth malamal, thinner, glass putty, wood screw 35mm, paint golden yellow, paint sky blue, paint smoke grey, fevicol, wood polish, plastic surface box 2 way 100mmx100mm, plastic surface box 3 way 100mmx100mm, plastic surface box 4 way 100mmx175mm, plastic surface box 9 way 200mmx250mm, plastic surface box 12 way dp 200mmx300mm, pvc trunking casingcaping curved 25mmx12mm, pvc trunking casingcaping box 30mmx15mm, pvc trunking coupler, pvc trunking elbow, pvc trunking tee, pvc trunking internal angle, pvc trunking ext angle, pvc trunking square box, dwc pipe cable duct nominal outer dia 4030mm and minimum inner dia 30mm, dwc pipe cable duct nominal outer dia 5038mm and minimum inner dia 37mm, dwc pipe cable duct nominal outer dia 7561mm and minimum inner dia 56mm, dwc pipe cable duct nominal outer dia 1201035mm and minimum inner dia 90mm, dwc pipe cable duct nominal outer dia 200175mm and minimum inner dia 150mm, kpt pprc pipe 25mm, kpt pprc pipe 40mm, kpt pprc pipe 50mm, kpt ppr coupling 25mm, kpt ppr coupling 40mm, kpt ppr coupling 50mm, kpt ppr elbow 90 25 mm, kpt ppr elbow 90 40 mm, kpt ppr elbow 90 50 mm, kpt ppr elbow 45 25 mm, kpt ppr elbow 45 40 mm, kpt ppr elbow 45 50 mm, kpt ppr tee 25 mm, kpt ppr tee 40 mm, kpt ppr tee 50 mm, kpt ppr reducer 5025mm, kpt ppr reducer 5040mm, kpt ppr reducing tee 502550mm, kpt ppr reducing tee 504050mm, slip on ppr c steel inlay flange 25mm, slip on ppr c steel inlay flange 40mm, slip on ppr c steel inlay flange 50mm, flange core stub end 25mm, flange core stub end 40mm, flange core stub end 50mm, slipon pprflanges 25 mm, slipon pprflanges 40 mm, slipon pprflanges 50 mm, plain union 25mm, plain union 40mm, plain union 50mm, 4 way cross tee 40mm, pipe clamp 25 mm, pipe clamp 50 mm, long plug 34, long plug 1, tank connector 20 mm, tank connector 25 mm, female threaded elbow 2512, male threaded elbow 2512, ppr gate valve 50mm, double union ball valve 25mm, by pass bend 25mm, end cap 16mm, end cap 20mm, end cap 25mm, medium mechanical strength rigid pvc conduit pipe od 25 mm 3 mtr length, medium mechanical strength rigid pvc conduit pipe od 20 mm 3 mtr length, 150 mm sluice valve of pressure rat pn 16 with operating wheel, sluice valve 80mm, fully automatic star delta starter 3 phasewith spp, fully automatic star delta starter 3 phase, ppr pipe 32mm, tcca 90 makebodal chemicals, calcium hypochlorite, copper sulphate, castic soda, pvc seat back for chair varandah, pvc seat for chair dining map, frp manhole cover 900x600mm, exhaust fan plastic body 250mmmake bajaj havells usha, pedastal fan 24 make havells almonard crompton, pre painted galvanised sheet 8x4x05mm, plain aluminium sheet 2500x1200x05mm, glass panes forested 120x60x3mm, glass panes forested 120x90x3mm, xlpe lt armoured cable 1100v 2c x 6sqmm, xlpe lt armoured cable 1100v 4c x 16sqmm, xlpe lt armoured cable 1100v 4c x 25sqmm, f bracket 8mmx4, glass panes forested 120x120x3mm, electric bush cutter machine
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16159977
Location : udhampur , jammu & kashmir
Source : GEM Tenders
tender for maint copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , towel ring (q3) , towel rail (q3) , bathroom or toilet mirror (v3) (q4) , stainless steel shelf rack (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , soap dish - case (q4) , plastic seats and covers for water - closets as per is 2548 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , connector pipes for washbasins/ sinks/ geyser (q3) , floor drain traps (v2) (q3) , flexible drain hoses for wash basins/ sinks (q3) , weld mesh febric as per is 4948 (q3) , brass spindle disc type half turn for cp bib tap , tumbler holder cp brass , cp handle for almirah godrej , push cock 15mm cp brass , cupboard handle fancy type 5inch brass cp , handle cp c type for steel locker , peg set of two cp brass , lid for water tank 500 ltrs capacity , lid for watertank for 1000 ltrs capacity , lid for water tank for 2000 ltrs , ptmt float valve complete 25mm , ptmt float valve complete with float and rod 20mm , ptmt float valve complete 15mm , brass spindle for pillar tap or bib cock 15mm , ball valve brass 20mm , ball valve brass 15mm , siphon washer for flushing cistern 55 mm dia rubber white cloured , pvc connection pipe braided with ptmt nut 600 mm 24inch , curtan rod drapery alluminium alloy 3by4 inch ore wood finish curtain pipe ss , pvc connection pipe braided with ptmt nut 15mm x 750 mm , bathroom glass shelf corner size 12inch x 12inch , stailess steel toilet paper holder , brass spindle for mixer , grating with hole 125 mm dia ss , grating with hole 125 mm dia ptmt , grating without hole 125 mm dia ptmt , grating without hole100 mm dia ss , trap cockroach grating with water seal ss cp , grating without hole 100 mm dia ptmt , pvc connection with ptmt nut 600mm , pvc connection 15mm x 450mm long with ptmt nut , push cock ptmt 15 mm , waste coupling for urinal 32mm dia ptmt , waste coupling 32 mm ptmt , waste coupling 40 mm ptmt , sliding door bolt 300 mm long aluminium , sliding door bolt 250 mm long aluminium , sliding door bolt 200 mm long al , towerbolt 150 mm al , towerbolt 100 mm al , towerbolt 150 mm ms , towerbolt 200 mm ms , sandwich rain shower rose , bathroom glass shelf straight 300 x 300 x 5mm with cp railling , plywood bwr 8ft x 4ft x18mm , plywood bwr 8ft x 4ft x12mm , partical board 8ft x 4ft x19mm exterior grade , prelaminated particle board 8ft x4ft x 12mm exterior grade , block board 8ft x 4ft x19mm bwp , sheet glass figured pin headed 1200 x 1200 x 3 mm thickness , plywood one side teak face 8ft x 4ft x3mm thick , seat and back pvc for chair verandah as per sample , patch mate for road pot hole 25 kg pack cold bitumen , planks 1800 x 250 x 25mm teak wood seasoned , medium density board waterproof decorative type 18 or 19 mm thick of size 8ft x 4ft , planks 1800 x 250x20mm teak wood seasoned , sunmica sheet laminated 1 mm thick of size 8ft x 4ft decorative , window glass sheet 1200x1200x4 mm thickness plain , planks 1800 x 250x15mm teak wood seasoned , plastic laminated sheet 8ft x4ft x 1 mm , mirror for dressing table gents 79cm x 41 cmx 5 point 5mm , base for chair revolving without wheel as per sample kept in bso yard , plywood commercial 8ft x4ft x 9mm , wire cloth galvanised mild steel 1500mm x 900 mmwide , flash strip 10 mtr x 100 mm , plywood commercial 8ft x4ft x 6mm , looking mirror 600 x 450 x 5.5 mm with back side 4 mm ply and two hooks , hydraulic for chair revolving , peg set of six stainless steel , pvc pipe swr 75 mm 3 mtr length , window glass sheet for window 1200mm x 1200mm x 3mm thickness plain , lakh dana , cement opc 43 gde 50 kg bag , mirror for dressing table ladies1200mm x 450mm x 5point5 mm thick , lock for table drawer as per sample , looking mirror 600 x 450 mm x 5point5 mm pvc frame with hooks for hanging , lock for almirah brass harrison link godrej as per sample , lock for almirah steel brass 75mm with duplicate keys , arm for chair revolving computer as per sample kept in bso yard , window glass sheet figured pin headed 1200x1200 x 4 mm , curtain rod 25 mm bore ms pvc laminated , herbicides weed killers pesticides for control undesirable herbs , socket for 110 mm dia pvc , back sheet cushion for pvc ornate as per sample kept in bso yard , seat cushion for pvc ornate as per sample kept in bso yard. , rusticle rust remover chemical , wheels for chair revolving , wood preservative and termite borer insect repellent make terminator , bracket curtain wood 1st class double rod for 3by4 inch , french polish , door spring helical ms 300 mm long , stainless steel sider for curtain rod dia 25mm , pvc pipe swr 110 mm 3 mtr length , cane plastic 2 mm white , cane plastic 4 mm hlf round , cane plastic 3 mm white , door stopper aluminium 75 mm , fevicol 1 kg packing , hylan brand is 2036 marked laminated sheet cover 3 mm all size , machine screw steel, brass spindle disc type half turn for cp bib tap, tumbler holder cp brass, cp handle for almirah godrej, push cock 15mm cp brass, cupboard handle fancy type 5inch brass cp, handle cp c type for steel locker, peg set of two cp brass, lid for water tank 500 ltrs capacity, lid for watertank for 1000 ltrs capacity, lid for water tank for 2000 ltrs, ptmt float valve complete 25mm, ptmt float valve complete with float and rod 20mm, ptmt float valve complete 15mm, brass spindle for pillar tap or bib cock 15mm, ball valve brass 20mm, ball valve brass 15mm, siphon washer for flushing cistern 55 mm dia rubber white cloured, pvc connection pipe braided with ptmt nut 600 mm 24inch, curtan rod drapery alluminium alloy 3by4 inch ore wood finish curtain pipe ss, pvc connection pipe braided with ptmt nut 15mm x 750 mm, bathroom glass shelf corner size 12inch x 12inch, stailess steel toilet paper holder, brass spindle for mixer, grating with hole 125 mm dia ss, grating with hole 125 mm dia ptmt, grating without hole 125 mm dia ptmt, grating without hole100 mm dia ss, trap cockroach grating with water seal ss cp, grating without hole 100 mm dia ptmt, pvc connection with ptmt nut 600mm, pvc connection 15mm x 450mm long with ptmt nut, push cock ptmt 15 mm, waste coupling for urinal 32mm dia ptmt, waste coupling 32 mm ptmt, waste coupling 40 mm ptmt, sliding door bolt 300 mm long aluminium, sliding door bolt 250 mm long aluminium, sliding door bolt 200 mm long al, towerbolt 150 mm al, towerbolt 100 mm al, towerbolt 150 mm ms, towerbolt 200 mm ms, sandwich rain shower rose, bathroom glass shelf straight 300 x 300 x 5mm with cp railling, plywood bwr 8ft x 4ft x18mm, plywood bwr 8ft x 4ft x12mm, partical board 8ft x 4ft x19mm exterior grade, prelaminated particle board 8ft x4ft x 12mm exterior grade, block board 8ft x 4ft x19mm bwp, sheet glass figured pin headed 1200 x 1200 x 3 mm thickness, plywood one side teak face 8ft x 4ft x3mm thick, seat and back pvc for chair verandah as per sample, patch mate for road pot hole 25 kg pack cold bitumen, planks 1800 x 250 x 25mm teak wood seasoned, medium density board waterproof decorative type 18 or 19 mm thick of size 8ft x 4ft, planks 1800 x 250x20mm teak wood seasoned, sunmica sheet laminated 1 mm thick of size 8ft x 4ft decorative, window glass sheet 1200x1200x4 mm thickness plain, planks 1800 x 250x15mm teak wood seasoned, plastic laminated sheet 8ft x4ft x 1 mm, mirror for dressing table gents 79cm x 41 cmx 5 point 5mm, base for chair revolving without wheel as per sample kept in bso yard, plywood commercial 8ft x4ft x 9mm, wire cloth galvanised mild steel 1500mm x 900 mmwide, flash strip 10 mtr x 100 mm, plywood commercial 8ft x4ft x 6mm, looking mirror 600 x 450 x 5.5 mm with back side 4 mm ply and two hooks, hydraulic for chair revolving, peg set of six stainless steel, pvc pipe swr 75 mm 3 mtr length, window glass sheet for window 1200mm x 1200mm x 3mm thickness plain, lakh dana, cement opc 43 gde 50 kg bag, mirror for dressing table ladies1200mm x 450mm x 5point5 mm thick, lock for table drawer as per sample, looking mirror 600 x 450 mm x 5point5 mm pvc frame with hooks for hanging, lock for almirah brass harrison link godrej as per sample, lock for almirah steel brass 75mm with duplicate keys, arm for chair revolving computer as per sample kept in bso yard, window glass sheet figured pin headed 1200 x 1200 x 4 mm, curtain rod 25 mm bore ms pvc laminated, herbicides weed killers pesticides for control undesirable herbs, socket for 110 mm dia pvc, back sheet cushion for pvc ornate as per sample kept in bso yard, seat cushion for pvc ornate as per sample kept in bso yard., rusticle rust remover chemical, wheels for chair revolving, wood preservative and termite borer insect repellent make terminator, bracket curtain wood 1st class double rod for 3by4 inch, french polish, door spring helical ms 300 mm long, stainless steel sider for curtain rod dia 25mm, pvc pipe swr 110 mm 3 mtr length, cane plastic 2 mm white, cane plastic 4 mm hlf round, cane plastic 3 mm white, door stopper aluminium 75 mm, fevicol 1 kg packing, hylan brand is 2036 marked laminated sheet cover 3 mm all size, machine screw steel black 32mm china packet of 100, machine screw steel black 25mm china packet of 100, machine screw steel black 20mm china packet of 100, end brackets stainless steel 25mm dia with screw, ammonium phosphates for wood preservative, flash strip 10 mtr x 50 mm, lock for table steel brass, sheet 0point5 mm thick al, finial for curtain rod 3by4 inch rod wood 1st class, caster wheel for chair revolving set of five, pvc conduit 20 mm size, bracket curtain 1by2 inch bore cp, conduit pipe pvc 25 mm, rubber washer for bib tap pkt of 50 nos, lubricating oil machine oil for hinges lock and locking arrangement, check nut mci 32 mm, shower arm 300mm with flange, rubber shoes for chair verandah, magnet door catcher, extension nipple cp 1 inch, washer rubber diameter 0point06 inch pkt of 50nos for roof j l hook, extension nipple cp size 15mm x 40mm, beading half round 4mm thick 1800 long, rubber shoes bed hard map, pvc beading glossy finish coloured width of 1inch, machine wood china 60 mm, cement white 1 kg pkt, conduit bend pvc 25 mm, rubber shoes for shoes rack map as per sample kept in bso yard, extension nipple cp 3by4inch x 3inch, extension nipple cp 3by4 inc x 2inch, pipe clamps for pvc swr pipes 75 mm, brackets for wash hand basin cast iron, studs for looking mirror cp size 40 mm x 20 mm dia, tar felt best quality 20 m roll 3mm th fibre base, upvc pipe 110 mm, rawl plug sizes 10 to16mm pvc pkt of 50 nos, chak mitti
Agency / Dept :
indian army
Due Date :
Jul 18, 2026
Tender Value :
43.73L
View Documents
T18 Ref No : 16226683
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 23, 2026
Tender Value :
64.96L
View Documents
T18 Ref No : 16357817
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
corrigendum tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 27, 2026
Tender Value :
64.96L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16313746
Location : pune , maharashtra
Source : GEM Tenders
corrigendum tender for provision of misc br items - tower bolts (non-ferrous metals) v2 as per is 204 (q2) , ewc , plywood , particle board , tarpaulin , heat shrink joint , glass plain , alum , copper sulphate , sundras , turpentine oil , lakhdana , cloth , thinner , putty , wood screw , paint enamel , fevicol , wood polish , plastuc surface box , pvc casing caping , pvc coupler , pvc elbow , pvc tee , pvc bend , pvc box , dwc pipe , ppr pipe , ppr couple , ppr elbow , ppr tee , ppr reducer , ppr reducer tee , slip on , flange , plain union , tee , clamp , plug , connector , elbow , gate valve , ball valve , bend , end cap , pvc conduit pipe , sluice valve , star delta starter , tcca 90 , calcium hypochlorite , castic soda , pvc seat back , pvc seat , manhole cover , exhaust fan , pedastal fan , galvanised sheet , aluminium sheet , glass frosted , xlpe armoured cable , bracket , bush cutter, ewc p type, plywood 8x4x12mm bwr, plywood 8x4x9mm bwr, plywood 8x4x1819mm bwr, plywood 8x4x10mm bwr, plywood 8x4x4mm bwr, plywood 8x4x6mm bwr, plywood 7x3x12mm bwr, particle boardmdf board 8x4x12mm one side teak face, tarpaulin hd 200gsm 30 inch x 40 inch, heat shrink straight through joint for 3core 120sqmm 11kv, heat shrink straight through joint for 3core 95sqmm 11kv, glass plain 1200x1200x3mm, ferric alum, ferric alum crystal, copper sulphate, sundras polish, gum spirit oil, lakhdana, cloth malamal, thinner, glass putty, wood screw 35mm, paint golden yellow, paint sky blue, paint smoke grey, fevicol, wood polish, plastic surface box 2 way 100mmx100mm, plastic surface box 3 way 100mmx100mm, plastic surface box 4 way 100mmx175mm, plastic surface box 9 way 200mmx250mm, plastic surface box 12 way dp 200mmx300mm, pvc trunking casingcaping curved 25mmx12mm, pvc trunking casingcaping box 30mmx15mm, pvc trunking coupler, pvc trunking elbow, pvc trunking tee, pvc trunking internal angle, pvc trunking ext angle, pvc trunking square box, dwc pipe cable duct nominal outer dia 4030mm and minimum inner dia 30mm, dwc pipe cable duct nominal outer dia 5038mm and minimum inner dia 37mm, dwc pipe cable duct nominal outer dia 7561mm and minimum inner dia 56mm, dwc pipe cable duct nominal outer dia 1201035mm and minimum inner dia 90mm, dwc pipe cable duct nominal outer dia 200175mm and minimum inner dia 150mm, kpt pprc pipe 25mm, kpt pprc pipe 40mm, kpt pprc pipe 50mm, kpt ppr coupling 25mm, kpt ppr coupling 40mm, kpt ppr coupling 50mm, kpt ppr elbow 90 25 mm, kpt ppr elbow 90 40 mm, kpt ppr elbow 90 50 mm, kpt ppr elbow 45 25 mm, kpt ppr elbow 45 40 mm, kpt ppr elbow 45 50 mm, kpt ppr tee 25 mm, kpt ppr tee 40 mm, kpt ppr tee 50 mm, kpt ppr reducer 5025mm, kpt ppr reducer 5040mm, kpt ppr reducing tee 502550mm, kpt ppr reducing tee 504050mm, slip on ppr c steel inlay flange 25mm, slip on ppr c steel inlay flange 40mm, slip on ppr c steel inlay flange 50mm, flange core stub end 25mm, flange core stub end 40mm, flange core stub end 50mm, slipon pprflanges 25 mm, slipon pprflanges 40 mm, slipon pprflanges 50 mm, plain union 25mm, plain union 40mm, plain union 50mm, 4 way cross tee 40mm, pipe clamp 25 mm, pipe clamp 50 mm, long plug 34, long plug 1, tank connector 20 mm, tank connector 25 mm, female threaded elbow 2512, male threaded elbow 2512, ppr gate valve 50mm, double union ball valve 25mm, by pass bend 25mm, end cap 16mm, end cap 20mm, end cap 25mm, medium mechanical strength rigid pvc conduit pipe od 25 mm 3 mtr length, medium mechanical strength rigid pvc conduit pipe od 20 mm 3 mtr length, 150 mm sluice valve of pressure rat pn 16 with operating wheel, sluice valve 80mm, fully automatic star delta starter 3 phasewith spp, fully automatic star delta starter 3 phase, ppr pipe 32mm, tcca 90 makebodal chemicals, calcium hypochlorite, copper sulphate, castic soda, pvc seat back for chair varandah, pvc seat for chair dining map, frp manhole cover 900x600mm, exhaust fan plastic body 250mmmake bajaj havells usha, pedastal fan 24 make havells almonard crompton, pre painted galvanised sheet 8x4x05mm, plain aluminium sheet 2500x1200x05mm, glass panes forested 120x60x3mm, glass panes forested 120x90x3mm, xlpe lt armoured cable 1100v 2c x 6sqmm, xlpe lt armoured cable 1100v 4c x 16sqmm, xlpe lt armoured cable 1100v 4c x 25sqmm, f bracket 8mmx4, glass panes forested 120x120x3mm, electric bush cutter machine
Agency / Dept :
indian army
Due Date :
Jul 20, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Aluminium Sheet Polishing Machine. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Aluminium Sheet Polishing Machine sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Aluminium Sheet Polishing Machine Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Aluminium Sheet Polishing Machine, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Aluminium Sheet Polishing Machine Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Aluminium Sheet Polishing Machine Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Aluminium Sheet Polishing Machine.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Aluminium Sheet Polishing Machine depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Aluminium Sheet Polishing Machine Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Aluminium Sheet Polishing Machine bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Aluminium Sheet Polishing Machine. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Aluminium Sheet Polishing Machine, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Aluminium Sheet Polishing Machine, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Aluminium Sheet Polishing Machine?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Aluminium Sheet Polishing Machine tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Aluminium Sheet Polishing Machine?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Aluminium Sheet Polishing Machine, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Aluminium Sheet Polishing Machine is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All