sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

100Latest Alloy steel flat Tenders List

Latest Alloy steel flat Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Alloy steel flat tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Alloy steel flat tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Alloy steel flat Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Alloy steel flat tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Alloy steel flat Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Alloy steel flat Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Alloy steel flat Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Alloy steel flat tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Alloy steel flat Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Alloy steel flat sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Alloy steel flat tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Alloy steel flat tenders.

Is EMD mandatory for all Alloy steel flat tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Alloy steel flat work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Alloy steel flat tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Alloy steel flat Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17050294
Location : dehradun , uttarakhand
Source : GEM Tenders
NEW TENDER
tender for borosil glass medium set of six , coaster set , double bed sheet with pillow cover , electric coffee blender , electric kettle , full plate set of six , garden pipe 1 inch , knife medium size , lime squeezer , paper weight , pedestal dustbin 10 ltr , pvc storage container 1 kg for grocery storage , quarter plate , serving tray medium size , table spoon , table glass 184 x 82 cm x 12 mm , tea cup and saucer set , tea pan steel , tea filter steel , wall hanger steel , water pump 2hp , double bed sheet with pillow cover set , double blanket with pillow cover , framed wall painting wall art , cutlery set , bucket and mug set , hand towel large , bath towel large , slippers personal , pillows cotton , pestle set, food grade 100 percent borosilicate clear glass tumblers full stop thermal shock and scratch resistant full stop microwave and dishwasher safe full stop capacity 250 to 300 ml each full stop set of 6 full stop, non slip base full stop heat and water resistant material such as wood comma high grade acrylic comma silicone or mdf full stop standard round or square shape full stop approximately 9 to 10 cm diameter full stop set of 6 full stop, 100 percent cotton or polycotton full stop minimum 200 to 250 tc full stop colorfast full stop dimensions approximately 220 x 240 cm full stop with 2 matching pillow covers approximately 45 x 70 cm full stop, portable handheld electric frother or blender full stop stainless steel food grade shaft and whisk full stop high rpm motor full stop standard electric or battery operated type full stop, stainless steel ss 304 inner body full stop capacity 1 full stop 5 to 1 full stop 8 litre full stop minimum 1500 w heating element full stop 360 degree cordless base full stop auto shut off full stop boil dry protection full stop isi marked full stop, food grade melamine comma porcelain or toughened opal glass full stop break resistant full stop microwave safe full stop dinner size approximately 10 to 11 inches or 25 to 28 cm full stop set of 6 full stop, heavy duty flexible braided pvc or rubber garden water hose full stop minimum 2 to 3 bar pressure rating full stop uv and weather resistant full stop 1 inch internal diameter full stop, heavy duty food grade stainless steel blade full stop approximately 6 to 8 inches length full stop ergonomic non slip polypropylene or wooden handle full stop corrosion resistant full stop, heavy duty stainless steel ss 304 or food safe die cast aluminium alloy full stop anti corrosion full stop manual hand press design with built in seed strainer full stop, heavy solid glass crystal comma metal or polished marble full stop smooth finish full stop minimum weight approximately 200 to 300 g each full stop dome comma prism or spherical shape full stop, foot pedal operated hands free trash bin full stop 10 litre capacity full stop heavy duty abs or pp plastic or ss 304 stainless steel full stop removable inner bucket full stop, food grade bpa free transparent or translucent pvc comma pet or pp container full stop airtight silicone seal or screw lid full stop capacity approximately 1000 to 1200 ml full stop, food grade melamine comma porcelain or toughened opal glass full stop break resistant full stop size approximately 7 to 8 inches or 18 to 20 cm full stop suitable for snacks or side serving full stop, rectangular heavy duty melamine comma polished stainless steel or hard acrylic tray full stop side carry handles full stop approximate dimensions 35 x 25 cm full stop, food grade stainless steel ss 201 or 304 full stop mirror or matte finish full stop minimum 1 full stop 5 mm thickness full stop standard dining size approximately 17 to 19 cm length full stop, toughened or float flat glass full stop thickness 12 mm full stop precise size 184 x 82 cm full stop all four edges smooth flat polished or bevelled full stop scratch resistant full stop, ceramic comma porcelain comma bone china or opalware full stop minimum 150 to 200 ml cup capacity full stop matching saucers full stop set of 6 cups and 6 saucers full stop, heavy gauge stainless steel ss 304 saucepan or milk pan full stop pouring spout full stop encapsulated induction and gas compatible base full stop sturdy bakelite handle full stop capacity approximately 1 full stop 5 to 2 litre full stop, double mesh stainless steel fine strainer full stop long handle and hanging rest notch full stop food grade wire mesh full stop rust proof full stop approximately 7 to 9 cm rim diameter full stop, stainless steel ss 304 wall mounted cloth or robe hook rail full stop heavy duty full stop minimum 5 to 6 hooks full stop rust proof full stop supplied with mounting screws and wall plugs full stop, single or three phase 2 hp electric motor pump set full stop 100 percent copper winding motor full stop isi certified full stop operating voltage 220 to 415 v full stop suitable for institutional water lifting full stop, premium 100 percent cotton double bed sheet full stop approximately 230 x 250 cm full stop minimum 250 tc full stop colorfast full stop includes 2 standard matching pillow covers approximately 45 x 70 cm full stop, warm double bed fleece comma mink or microfiber thermal blanket full stop heavy gsm approximately 400 to 500 gsm full stop size 200 x 240 cm full stop with 2 matching quilted or fabric pillow covers full stop, high definition digital or canvas print on sturdy mdf backboard full stop framed with lightweight ps or wood moulding full stop clear front protection full stop approximate size 30 x 45 cm to 45 x 60 cm full stop, stainless steel dining cutlery set full stop ss 304 or 410 grade full stop rust resistant full stop contains dinner spoons comma forks comma soup spoons and dessert spoons or knives full stop with standard stand or tray full stop, heavy duty virgin plastic pp bucket full stop minimum 18 to 20 litre capacity full stop sturdy metal or plastic handle full stop paired with matching 1 full stop 0 to 1 full stop 5 litre plastic bath mug full stop, 100 percent cotton terry cloth full stop high absorbency full stop minimum 400 to 450 gsm full stop size approximately 40 x 60 cm full stop, 100 percent combed cotton terry weave full stop high absorbency full stop minimum 500 gsm full stop large size approximately 70 x 140 cm or 27 x 54 inches full stop, comfortable eva or rubber sole indoor bathroom or washroom slippers full stop anti skid patterned bottom full stop standard adult unisex sizing full stop, premium hygienic cotton or hollow fibre filling full stop soft breathable outer cover full stop size approximately 40 x 60 cm to 45 x 70 cm full stop minimum weight 600 to 800 g each full stop, heavy solid granite comma stainless steel comma brass or ceramic mortar and pestle set for grinding herbs and spices full stop scratch and chip resistant full stop approximately 3 to 4 inch inner bowl full stop
Agency / Dept :
indian army
Due Date :
Sep 12, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17050326
Location : nainital , uttarakhand
Source : GEM Tenders
NEW TENDER
tender for boq items health faucet (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , towel rail (q3) , towel ring (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , connector pipes for washbasins/ sinks/ geyser (q3) , stainless steel shelf rack (q3) , bathroom or toilet mirror (v3) (q4) , waste fittings for washbasin and sinks as per is 2963 (q3) , flexible drain hoses for wash basins/ sinks (q3) , floor drain traps (v2) (q3) , soap dish - case (q4) , curtain rod 25 mm dia steel 304 grade , looking mirror 600x450x5mm with alu frame , ewc with s trap , pvc lid for water tank 500 or 1000 ltrs , ptmt flaot valve 20mm symet complete , hydraulic door closer alum die cast door isi marked heavy duty , hydraulic door closer alumdie cast door isi marked heavy duty , wash hand basin 550x400mm isi marked , ptmt float valve 15mm symet complete , ss wall to wall bracket for 25 mm for curtain rod , ssteel bracket and knob for curtain rod 25mm , mortise lock 100 by 65 isi marked , gi lid with spikes for water tank for 1000 by 1500 ltr , aluminiun door handle 150mm , rubber strip for aluminium door seal , pvc swr pipe 110mm dia 20 feet long isi marked , aluminium sliding door bolt 250mm isi marked , door stopper aluminium double 75mm long isi marked , aluminium door handle 100mm isi marked , aluminium tower bolt 200mm isi marked , float valve 20mm symet complete brass isi marked , flaot valve 15mm symet complete brass isi marked , pvc elbow for pipe 110mm , ms sliding door bolt 300mm isi marked , white cement 1 kg pack isi makred , aluminium tower bolt 150mm isi marked , hasp and staple 75mm , hasp and staple 100mm , stainless steel knob lock for door lock isi marked , looking mirror 600x450x5mm with pvc frame , pvc pipe 32mm , cp brass toilet paper holder with stainless steel flap 150 mm , door magnet catcher , door spring helical 300 mm isi marked , ball cock 20mm with complete rod and ball isi marked , flush handle 100mm , putty for fixing glass , cpvc pipe 20mm outer dia meter isi marked , cpvc elbow 20mm outer dia meter isi marked , cpvc tee 20mm outer dia meter isi marked , wc indian type 580x440mm orrisa pan isi marked , cpvc elbow 16mm outer dia meter isi marked , cpvc tee 16mm outer dia meter isi marked , m seal 1000 gm pack , urinal flat back 465x355x265 isi marked , wire mesh point 56mm steel 3 feet x 15 mtr roll , steel wire cloth point 36mm nominal dia 3 feet x 15 mtr roll , ms door spring rat rail 200mm , pvc swr pipe 75mm isi marked , pvc swr bend 100mm with access door isi marked , pvc swr bend 75mm with access door isi marked , l bend pipe 32mm dia for wc indian type , mixture spindle isi marked , teflon tape 25mm x 6 m isi marked , corner glass shelves 300 mm , whb glass shelves rectangular , cp brass extention nipple 15x50mm isi marked , cp brass extention nipple 15x25mm isi marked , cp jet spray with flexible pipe isi marked , waste coupling cp 40mm dia isi marked , door spring helical150mm isi marked , urinal half stall 345 x 320 x 560 mm isi marked , floor machine for aluminium door heavy duty isi marked , ewc p trap type isi marked , tee upvc 20mm brass , screw wood steel 50mm pack of 100 nos , mechine black screw 15 by 20mm , nails 1 point 5 inch long , m s repit 1 by 2 inch 100 n0s per pkt , m.s screws 40mm pack of 100 nos , nails 20mm long , nails 50mm long , nails 25mm long , steel screws 8x20 mm , screw wood steel 25mm pack of 100 nos , steel screws 20mm pack of 100 nos , black nails 15mm long , steel screws 75mm pack of 100 noa , ptmt stop cock 15mm , pvc connection pipe brass headed 15 x 450mm , steel screws 100mm pack of 100 , piano type butt hinges 20mm isi marked , butt hinges 75mm steel isi marked , butt hinges 100mm dia ssteel isi marked, curtain rod 25 mm dia steel 304 grade, looking mirror 600x450x5mm with alu frame, ewc with s trap, pvc lid for water tank 500 or 1000 ltrs, ptmt flaot valve 20mm symet complete, hydraulic door closer alum die cast door isi marked heavy duty, hydraulic door closer alumdie cast door isi marked heavy duty, wash hand basin 550x400mm isi marked, ptmt float valve 15mm symet complete, ss wall to wall bracket for 25 mm for curtain rod, ssteel bracket and knob for curtain rod 25mm, mortise lock 100 by 65 isi marked, gi lid with spikes for water tank for 1000 by 1500 ltr, aluminiun door handle 150mm, rubber strip for aluminium door seal, pvc swr pipe 110mm dia 20 feet long isi marked, aluminium sliding door bolt 250mm isi marked, door stopper aluminium double 75mm long isi marked, aluminium door handle 100mm isi marked, aluminium tower bolt 200mm isi marked, float valve 20mm symet complete brass isi marked, flaot valve 15mm symet complete brass isi marked, pvc elbow for pipe 110mm, ms sliding door bolt 300mm isi marked, white cement 1 kg pack isi makred, aluminium tower bolt 150mm isi marked, hasp and staple 75mm, hasp and staple 100mm, stainless steel knob lock for door lock isi marked, looking mirror 600x450x5mm with pvc frame, pvc pipe 32mm, cp brass toilet paper holder with stainless steel flap 150 mm, door magnet catcher, door spring helical 300 mm isi marked, ball cock 20mm with complete rod and ball isi marked, flush handle 100mm, putty for fixing glass, cpvc pipe 20mm outer dia meter isi marked, cpvc elbow 20mm outer dia meter isi marked, cpvc tee 20mm outer dia meter isi marked, wc indian type 580x440mm orrisa pan isi marked, cpvc elbow 16mm outer dia meter isi marked, cpvc tee 16mm outer dia meter isi marked, m seal 1000 gm pack, urinal flat back 465x355x265 isi marked, wire mesh point 56mm steel 3 feet x 15 mtr roll, steel wire cloth point 36mm nominal dia 3 feet x 15 mtr roll, ms door spring rat rail 200mm, pvc swr pipe 75mm isi marked, pvc swr bend 100mm with access door isi marked, pvc swr bend 75mm with access door isi marked, l bend pipe 32mm dia for wc indian type, mixture spindle isi marked, teflon tape 25mm x 6 m isi marked, corner glass shelves 300 mm, whb glass shelves rectangular, cp brass extention nipple 15x50mm isi marked, cp brass extention nipple 15x25mm isi marked, cp jet spray with flexible pipe isi marked, waste coupling cp 40mm dia isi marked, door spring helical150mm isi marked, urinal half stall 345 x 320 x 560 mm isi marked, floor machine for aluminium door heavy duty isi marked, ewc p trap type isi marked, tee upvc 20mm brass, screw wood steel 50mm pack of 100 nos, mechine black screw 15 by 20mm, nails 1 point 5 inch long, m s repit 1 by 2 inch 100 n0s per pkt, m.s screws 40mm pack of 100 nos, nails 20mm long, nails 50mm long, nails 25mm long, steel screws 8x20 mm, screw wood steel 25mm pack of 100 nos, steel screws 20mm pack of 100 nos, black nails 15mm long, steel screws 75mm pack of 100 noa, ptmt stop cock 15mm, pvc connection pipe brass headed 15 x 450mm, steel screws 100mm pack of 100, piano type butt hinges 20mm isi marked, butt hinges 75mm steel isi marked, butt hinges 100mm dia ssteel isi marked
Agency / Dept :
indian army
Due Date :
Sep 10, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17050623
Location : ernakulam , kerala
Source : GEM Tenders
NEW TENDER
corrigendum tender for compression testing machine (q3) , hot air oven , industrial helmet with face shield , hand gloves , aluminium ladder , first aid kit , rubber floor mat , tool kit with box , safety aprons , water purifier , fire extinguisher , landline telephone, procurement of lab testing equipments stores and safety accessories for material testing, hot air over mild steel body coated stainless steel 304 grade. rechargeable battery. inner volume 200 to 250 l. ambient temperature 10 degree to 250 degree celsius., industrial helmet with face shield material should be high-density polyethylene (hdpe) or polycarbonate. full brim with detached face shield., hand gloves material should be nitrile or rubber coated cotton polyster blend. anti slip textured palm for grip., aluminium ladder material should be aluminium alloy. height 5 to 6 feet. 6 wide steps with antiskid thread, foldable,, first aid kit it should include sterile gauze pads, bandages, adhesive tapes, antiseptic solution and cream, scissors, burn cream, painkillers, cotton gloves, cpr masks., rubber floor mat material should be vulcanized rubber or pvc blend with size 2.5m x 1.5m, 10mm thick, waterproof, oil resistant., tool kit with box including screwdriver (flat and philips head, hammer, rubber mallet, hacksaw with blade, allen keys, electrical tester., safety aprons waterproof pvc or rubber coated fabric, free size, adjustable neck with waist straps., water purifier wall mounted or table top, 5 ltr storage, abs food grade plastic body with indicator for water level, purification and tank full. 0, fire extinguisher wall mounted with capacity 6 kgs nitrogen gas, discharge time 13-15 sec with discahrge range 4 to 6 m., landline telephone corded landline phone with lcd display and caller id feature.
Agency / Dept :
indian army
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
6.7L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17056203
Location : jalandhar , punjab
Source : GEM Tenders
NEW TENDER
tender for steel mild bright round 6mm , steel mild bright round 10mm , wire steel mild 1.6mm , steel angle 40x40x5 mm , steel angle 40x40x6 mm , steel angle 45x45x5 mm , steel angle 50x50x5 mm , steel angle 100x100x10 mm , electrod welding high alloy steel 2.5m , ms sheet , ms flat, exp store
Agency / Dept :
indian army
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16710648
Location : gorakhpur , uttar pradesh
LIVE TENDER
tender for alloy steel flat 135mm x 8mm x 3000mm length is:3885,, alloy steel flat 135mm x 8mm x 3000mm length is:3885, part 2, grade 5, material s pecification, (1) is:3885 part 2 grade 5, (2) supply condition-oil hardend, (3) hardness-35-40 hr c, - warranty period: 30 months after the date of delivery
Agency / Dept :
north eastern railway NER
Due Date :
Sep 02, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16875110
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for 3 1354 t351 10t , 3 1354 t351 15t , 3 1354 t351 020t , ams42057010t7451 125t , 3 1354 t3 90 od 3 4 wt , 3 1354 t3 90 od 4 wt , 1 6604 4 60d , 1 7214 5 40d , 1 7214 5 25d , bs 5s 99d 25d , 1 4044 5 35d , 1 4044 5 40d , 1 7734 5 30d , 15 cdv 6 ht 100 od 10wt , 1 4301 a 1 0 30 , bs 5s 99d annealed 55t , 1 7734 5 35t , 1 7734 5 40t , 1 7734 5 50t , 3 7164 1 20d , 3 7164 1 din65040 25d, supply of raw materials 22 items, al alloy plate, aluminium alloy billet, aluminium alloy flat, flat aluminium, aluminium alloy tube, c m steel rod, rod steel, ncm steel rod, cor res steel rod, c r steel rod, steel rod, steel tube, st steel sheet, flat steel, steel plate, alloy steel plate, rod titanium 20 dia, rod titanium 25 dia
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Sep 10, 2026 (7 days left)
Tender Value :
1.45Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16812298
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm
Agency / Dept :
department of technical education DTE
Due Date :
Sep 07, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16954776
Location : gangtok , sikkim
Source : GEM Tenders
LIVE TENDER
tender for armourd welding rod , ply wood for general purposes mr ab 3pl , leather cloth black , paint rfu white , steel angles 50 x 50 x 5 mm , steel angles 25 x 25 x 3 mm , steel bar alloy hot rolled flat 30 x 6 mm , steel bar carbon hot rolled mild round bright 3 ablique 4 inch , steel bar alloy hot rolled flat 75 x 10m , steel angles 45 x 45 x 5 mm , steel angles 20 x 20 x 3 mm , sunmica , leather cloth white , ms steel sheet , wire iron jali , cable power electrical copper conductor 70 sq mm , insulation tape electrical pvc adhesive , blade hack saw hand flexible fine nomina , washer banjo 19mm , washer banjo 18mm , washer banjo 17mm, armourd welding rod, ply wood for general purposes mr ab 3pl, leather cloth black, paint rfu white, steel angles 50 x 50 x 5 mm, steel angles 25 x 25 x 3 mm, steel bar alloy hot rolled flat 30 x 6 mm, steel bar carbon hot rolled mild round bright 3 ablique 4 inch, steel bar alloy hot rolled flat 75 x 10m, steel angles 45 x 45 x 5 mm, steel angles 20 x 20 x 3 mm, sunmica, leather cloth white, ms steel sheet, wire iron jali, cable power electrical copper conductor 70 sq mm, insulation tape electrical pvc adhesive, blade hack saw hand flexible fine nomina, washer banjo 19mm, washer banjo 18mm, washer banjo 17mm
Agency / Dept :
indian army
Due Date :
Sep 04, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16919811
Location : ranchi , jharkhand
Source : GEM Tenders
LIVE TENDER
tender for line tester 5 inch , steel gurmala , pipe wrench 18 inch , pipe wrench 10 inch , general purpose pipe wrench 13 mm , drill bit rcc 6 mm to 10 mm , tota plair 200 mm , karni small trowel narrow , karni medium trowel narrow , karni large , plumb bob , multi meter , hand saw 14 inch , electric jack planner , plair 8 inch , steel jack planner 9 inch , sprit level , water level pipe pvc 08mm dia , l and key set , randa blade , iron bit set , wooden cutter blade , wooden or tile cutter blade , tikora , measuring tape 5 mtr steel , drill machine normal , pipe wrench 14 inch , meson tesi hammer basuli tesi , mortise chisel 15 mm to 25 mm , farmer chisel 25 mm to 50 mm , tonge tester clamp metre , screw driver 12 inch , star screw driver 10 inch , hand grinder machine , champion set , glass cutter , ball pin hammer , tool bag cloth big , basula 500gm , tool bag cloth large, purchase of tradesmen tools, eelectrical work isi mark or std qlty, isi mark or std qlty, smith cast iron general purpose pipe wrench 38mm isi mark or std qlty, 10 inch length isi mark or std qlty, 13 mm isi mark or std qlty, hss drill bit set isi mark std qlty, 200 mm hira chrome vanadium steel insulated water pump plier isi mark std qlty, care interior trowel pointed care interior trowel isi mark or std qlty, care interior trowel pointed care interior trowel si mark std qlty, care interior trowel pointed care interior trowelsi mark or std qlty, iron pendulum bob of diameter 12 mm isi mark or std qlty, hand held 1000 khz digital multi meter isi mark or std qlty, hardened and tempered steel strips handsaw with plastic handle isi mark or std qlty, hand held portable wood planer suit able for both soft wood & hard wood isi mark or std qlty, hand held portable wood planer suitable for both soft wood & hard wood isi mark or std qlty, free mans non magnetic spirit level isi mark or std qlty, pvc 08mm dia isi mark or std qlty, in plastic folding box isi mark or std qlty, shea ring machine blade isi mark or std qlty, hss conical drill isi mark or std qlty, hss slitting saw diameter 4 inch isi mark or std qlty, hss slitting saw diameter 5 inch dai isi mark or std qlty, double cut taper saw file isi mark or std qlty, 5 mtr steel isi mark or std qlty, cordless portable drill machine having drilling capacity in steel isi mark or std qlty, cost iron general purpose pipe wrench isi mark or std qlty, hammer basuli tesi key or hammers pit on defence isi mark or std qlty, 15 mm to 25 mm isi mark or std qlty, flat alloy steel cold chisel isi mark or std qlty, htc 3 digit backlit lcd hand held true rms clamp meter isi mark or std qlty, 12 inch isi mark or std qlty, 10 inch isi mark or std qlty, bosch corded angle grinder having disc diameter of 180mm isi mark or std qlty, steel general purpose tool kit isi mark or std qlty, hand hened steel alloy claw hammer length 330 milli meter weight 250 gm isi mark or std qlty
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Sep 12, 2026 (9 days left)
Tender Value :
3L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Alloy Steel Flat. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Alloy Steel Flat sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Alloy Steel Flat Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Alloy Steel Flat, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Alloy Steel Flat Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Alloy Steel Flat Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Alloy Steel Flat.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Alloy Steel Flat depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Alloy Steel Flat Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Alloy Steel Flat bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Alloy Steel Flat. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Alloy Steel Flat, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Alloy Steel Flat, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Alloy Steel Flat?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Alloy Steel Flat tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Alloy Steel Flat?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Alloy Steel Flat, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Alloy Steel Flat is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All