sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

21Latest Aggregate base coarse Tenders List

Latest Aggregate base coarse Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Aggregate base coarse tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Aggregate base coarse tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Aggregate base coarse Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Aggregate base coarse tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Aggregate base coarse Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Aggregate base coarse Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Aggregate base coarse Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Aggregate base coarse tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Aggregate base coarse Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Aggregate base coarse sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Aggregate base coarse tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Aggregate base coarse tenders.

Is EMD mandatory for all Aggregate base coarse tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Aggregate base coarse work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Aggregate base coarse tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Aggregate base coarse Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16872213
Location : tawang , arunachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for masonry carpentry and general construction tools - crow bar heavy duty big size , mason trowel 4 inch steel with handle , mason trowel 5 inch steel with handle , mason trowel 6 inch steel with handle , mason trowel 8 inch steel with handle , mason trowel 9 inch steel with handle , plumb bob , transparent water level pipe 10 mm , mortar pan tasla 16 inch , stone breaking hammer 2 kg , mason thread cotton , mason thread nylon , spirit level 12 inch steel body , tape steel 2 metre steel case , tape steel 3 metre steel case , tape steel 15 metre steel case , hammer stone breaking 1 kg , wheel barrow single wheel , spare wheel for wheel barrow cast iron with solid rubber tyre and double ball bearing , dah iron 12 inch with handle , rammer earth 5 kg , earth rammer 14 lbs with wooden handle , folding entrenching shovel military specification , hammer stone dressing 1 kg , felling axe 2 kg without handle , hammer chisel face with handle 6 kg , mason hammer with chisel 850 gram , mason hammer chisel type , cordless rotary hammer drill 18 volt sds plus , electric planer for carpenter nput power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm , hand tool kit for carpenter , carpenter screw driver 18 inch , carborundum stone 6 inch x 2 inch x 1 inch , blade for jack plane 2 inch , carpenter hand drill machine , electric jack planer , electric circular saw 12 inch , electric jack plane , gurmala steel 9 inch to 12 inch , hacksaw frame 12 inch , raker 10 to 12 prong , electric circular saw with spare blade , raker 12 prong with wooden handle , hand operated bitumen sprayer can , sledge hammer 2 kg without handle , sledge hammer 5 kg to 6 kg without handle , stone breaking hammer 6 kg , stone dressing chisel half inch and three fourth inch , steel measuring tape 5 metre fibre case , steel measuring tape 15 metre fibre case , steel measuring tape 30 metre fibre case , hand saw 12 inch , hand saw 20 inch , carpenter chisel 1 inch , carpenter chisel 2 inch , auger eyed half inch , spirit level 8 inch pvc body , spirit level 12 inch pvc body , spirit level 18 inch pvc body , spirit level 24 inch pvc body , spirit level 18 inch steel body , spirit level 24 inch steel body, octagonal crow bar conforming to is 704 latest. material high carbon steel. length 1650 mm. diameter at hammer end 30 mm. nominal weight 11 kg. heat treated and forged. one chisel end and one hammer end. black oxide finish. make equivalent to tata or reputed manufacturer., conforming to is 6013. blade size 4 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 5 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 6 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 8 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., conforming to is 6013. blade size 9 inch. pointed type. blade material high tensile steel. blade thickness 1.5 mm minimum. blade hardness 50 to 55 hrc. hard chrome plated blade. handle length 180 mm. wooden or polypropylene handle. manufacturer iso 9001 certified., material forged steel or brass. weight 200/500 gram. precision machined pointed tip. complete with 2 metre nylon thread. corrosion resistant finish. suitable for masonry alignment., transparent flexible pvc water tube. internal diameter 10 mm. wall thickness 2 mm minimum. uv resistant. kink resistant. smooth inner surface. roll length 30 metre minimum., virgin hdpe or pp plastic. diameter 16 inch. capacity 18 to 20 litre. weight 700 gram minimum. heavy duty. unbreakable. crack resistant. smooth non stick inner surface. uv stabilized., head weight 2 kg. forged high carbon steel head. heat treated. face hardness 50 to 55 hrc. handle fiberglass or seasoned hardwood. handle length 800 to 900 mm. anti slip rubber grip. heavy duty construction. manufacturer iso 9001 certified., construction 56 tex x 3 x 3. material 100 percent cotton. linear density 560 gram per 1000 metre minimum. breaking load 78 newton minimum. ball weight 200 gram minimum. uniform twist. high strength. suitable for masonry line marking., material 100 percent nylon multifilament. diameter 1.5 mm minimum. breaking strength 100 newton minimum. ball weight 200 gram minimum. high tensile strength. abrasion resistant. water resistant. suitable for masonry alignment and layout work., non magnetic type. body material heavy duty steel. length 12 inch. accuracy 0.5 mm per metre or better. tube thickness 1.25 mm minimum. liquid ethyl ether or industrial methylated spirit. width 50 mm. height 20 mm. weight 165 gram minimum. warranty 1 year, measuring length 2 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 3 metre. blade material stainless steel. case material steel. blade width 16 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii., measuring length 15 metre. blade material stainless steel. steel closed case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii., head weight 1 kg. forged high carbon steel head. heat treated. hardness 50 to 55 hrc. double face. fiberglass or hardwood handle. handle length 300 mm to 350 mm. anti slip grip. heavy duty construction., capacity 90 litre minimum. tray material pressed mild steel. tray thickness 1.2 mm minimum. frame heavy duty mild steel tubular construction. wheel diameter 380 mm minimum. pneumatic rubber tyre with steel rim. load capacity 150 kg minimum. powder coated finish., wheel diameter 380 mm minimum. cast iron rim. solid rubber tyre. double ball bearing. axle bore 20 mm. heavy duty construction. suitable for standard wheel barrow., blade length 12 inch. blade material drop forged high carbon steel. blade thickness 4 mm minimum. heat treated. cutting edge hardened. full tang construction. hardwood handle with steel rivets. overall length 450 mm minimum. heavy duty construction, head weight 5 kg. rammer head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. head height 100 mm minimum. hardwood seasoned wooden handle. handle length 1200 mm minimum. heavy duty construction suitable for earth compaction., rammer weight 14 lbs. head made of cast iron or forged steel. base size 200 mm x 200 mm minimum. heat treated. seasoned hardwood handle. handle length 1200 mm minimum. heavy duty construction for compacting soil and aggregates., military specification folding entrenching shovel. three position locking mechanism. blade material high carbon steel. blade hardness 45 to 55 hrc. overall length 580 mm minimum when open. folded length 250 mm maximum. powder coated finish. serrated edge on one side. carry pouch included., head weight 1 kg. forged high carbon steel. heat treated. double face. face hardness 50 to 55 hrc. fiberglass or hardwood handle. handle length 300 mm to 350 mm. heavy duty construction., head weight 2 kg. drop forged high carbon steel. heat treated cutting edge. blade hardness 50 to 55 hrc. cutting edge width 120 mm minimum. eye suitable for standard wooden handle. rust resistant finish., head weight 6 kg. forged high carbon steel. one flat striking face and one chisel face. heat treated. face hardness 50 to 55 hrc. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction., head weight 850 gram. high carbon steel head. one square striking face and one chisel end. heat treated. face hardness 50 to 55 hrc. hardwood or fiberglass handle. handle length 300 mm minimum. heavy duty construction., head weight 600 gram to 800 gram. forged high carbon steel. one flat face and one chisel edge. heat treated. hardwood or fiberglass handle. handle length 300 mm minimum. suitable for brick and stone masonry work., voltage 18 volt dc. chuck type sds plus. battery lithium ion 4 ah minimum. motor type brushless or brushed. impact energy 1.5 joule to 2.6 joule. no load speed 0 to 1400 rpm. impact rate 0 to 4675 bpm. three operating modes rotary drilling hammer drilling and chiselling. maximum drilling capacity concrete 28 mm metal 13 mm wood 30 mm. tool weight 2.3 kg to 3.5 kg including battery. integrated mechanical or electronic safety clutch with anti rotation protection. vibration reduction system. variable speed control. forward and reverse function. led work light. fast charger. minimum two lithium ion batteries of 4 ah each. heavy duty carry case included. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or hilti or equivalent., input power 650 watt to 750 watt. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. heavy duty aluminium base plate with v groove. reversible tungsten carbide blades. dual chip ejection. adjustable depth control. parking shoe. ergonomic soft grip handle with safety lock switch. dust collection facility. accessories to include parallel guide wrench and dust bag. manufacturer iso 9001 certified. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., professional carpenter hand tool kit comprising essential hand tools. heavy duty carrying case. tools made of chrome vanadium steel or high carbon steel. ergonomic insulated handles. manufacturer iso 9001 certified. make bosch or stanley or taparia or ingco or equivalent., overall length 18 inch. blade material chrome vanadium steel. blade length 300 mm minimum. magnetic tip. hardened and tempered blade. ergonomic anti slip handle. manufacturer iso 9001 certified. make taparia or stanley or bosch or equivalent., size 6 inch x 2 inch x 1 inch. material silicon carbide. double sided coarse and fine grit. suitable for sharpening carpenter tools. heavy duty quality., blade width 2 inch. material high carbon tool steel. hardened and tempered. hardness 58 to 62 hrc. precision ground cutting edge. suitable for standard hand jack plane., manual hand drill with geared drive. chuck capacity 1.5 mm to 10 mm. steel body. hardened steel gears. wooden or polypropylene handle. smooth operation. heavy duty construction., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. rebating depth 9 mm minimum. tungsten carbide blades. aluminium base plate. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. blade guard. dust extraction port. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., input power 650 watt to 750 watt. voltage 220 volt to 240 volt ac. no load speed 15000 rpm to 17000 rpm. planing width 82 mm. adjustable planing depth 0 mm to 2.6 mm. aluminium base plate. tungsten carbide blades. dust collection facility. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., material high carbon steel. size 9 inch to 12 inch. hardened and tempered. polished finish. heavy duty construction. suitable for carpenter marking and shaping work. indigenous pattern., frame size 12 inch. heavy duty tubular steel frame. suitable for 300 mm blade. adjustable blade tension. ergonomic handle. powder coated finish. blade included. make taparia or stanley or eclipse or equivalent., heavy duty garden raker. number of prongs 10 to 12. prong material high carbon steel. head width 300 mm to 350 mm. prongs heat treated. handle length 1200 mm to 1500 mm. hardwood handle with firm grip. powder coated finish., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac 50 hz. no load speed 4000 rpm minimum. cutting depth 100 mm minimum at 90 degree. bevel capacity 0 degree to 45 degree. carbide tipped blade. blade guard. dust extraction port. soft grip handle. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., blade diameter 12 inch. input power 1800 watt minimum. operating voltage 220 volt to 240 volt ac. no load speed 4000 rpm minimum. maximum cutting depth 100 mm minimum. adjustable bevel 0 degree to 45 degree. one extra tungsten carbide tipped blade included. heavy duty carry case. warranty 1 year minimum. make bosch or makita or dewalt or stanley or equivalent., number of prongs 12. head material mild steel. head length 12 inch. heat treated prongs. hardwood handle length 1200 mm minimum. powder coated finish. heavy duty construction., capacity 10 litre minimum. material heavy gauge mild steel. hand operated pump. brass spray nozzle. flexible hose 1.5 metre minimum. working pressure 3 bar minimum. leak proof construction. powder coated finish. suitable for spraying bitumen emulsion and primer., conforming to is 841 latest. head weight 2 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., conforming to is 841 latest. head weight 5 kg to 6 kg. oval round nose eye. forged high carbon steel. heat treated. face hardness 50 to 55 hrc. without handle. black finish., head weight 6 kg. forged high carbon steel. heat treated. double face. fiberglass or seasoned hardwood handle. handle length 900 mm minimum. anti slip grip. heavy duty construction, size half inch and three fourth inch. material forged high carbon steel. heat treated. hardness 50 to 55 hrc. overall length 200 mm to 250 mm. hardened cutting edge. suitable for stone dressing and masonry work., measuring length 5 metre. blade material stainless steel. fibre reinforced abs case. blade width 19 mm minimum. blade thickness 0.10 mm minimum. lock button. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 15 metre. blade material stainless steel. fibre reinforced abs case. blade width 12 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., measuring length 30 metre. blade material stainless steel. fibre reinforced abs case. blade width 13 mm minimum. blade thickness 0.10 mm minimum. folding rewind handle. graduation in mm and cm. accuracy class ii. warranty 1 year minimum. make freemans or stanley or bosch or equivalent., blade length 12 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for wood cutting. make stanley or bahco or taparia or equivalent., blade length 20 inch to 21 inch. blade material high carbon steel. blade thickness 1 mm minimum. triple ground hardened teeth. teeth per inch 7 to 9. ergonomic anti slip handle. suitable for heavy duty wood cutting. make stanley or bahco or taparia or equivalent., blade width 1 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., blade width 2 inch. blade material chrome vanadium steel or high carbon steel. hardened and tempered. hardness 58 to 62 hrc. bevel edge. wooden or polypropylene handle with steel striking cap. make stanley or taparia or bosch or equivalent., size half inch. material forged high carbon steel. heat treated. precision ground spiral. eye type. suitable for wood boring. rust resistant finish. make taparia or stanley or equivalent., length 8 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 12 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 24 inch. body material heavy duty pvc. three acrylic vials horizontal vertical and 45 degree. accuracy 0.5 mm per metre or better. shock resistant end caps. make freemans or stanley or equivalent., length 18 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent., length 24 inch. body material heavy duty steel. three precision acrylic vials. accuracy 0.5 mm per metre or better. powder coated finish. shock resistant end caps. make freemans or stanley or bosch or equivalent.
Agency / Dept :
border road organisation BRO
Due Date :
Sep 09, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16953018
Location : vemula , andhra pradesh
Source : GEM Tenders
LIVE TENDER
corrigendum tender for bitumenlayingwork2 , kerbstonelayingwork1 , tailingexcavationwork1 , borrowearthsoilwork3 , removinghdpeliningwork1 , dismantlingstonepitching1 , backfillingoftailing1 , laboratorytestwork15 , humepipework1 , humepipework2 , humepipework3 , humepipework4 , humepipework5 , humepipework6 , earthworkfillingforbund1 , stonepitchingwork5 , brickwork1 , brickwork2 , plasteringwork1 , plasteringwork2 , plasteringwork3 , paitingwork1 , paitingwork2 , paitingwork3 , handrailingwork3 , ccforflooringwork1 , plasteringwork4 , glasssstripswork1 , cementpunning1 , aluminumwork1 , shutterworks1 , glasspaneswork1 , siliconsealantwork1 , doorworks1 , mechanicalinstallationpumps1 , mechanicalinstallationpipes1 , mechanicalinstallationpipes2 , mechanicalinstallationpipes3 , electricallinstallation5 , mechanicalerections1 , disposalareappep1 , slimedisposalareappep1 , slimedisposalareappep2 , constructionofelectricalfacilityworklumpsum1 , panelneartaillingpond , automaticpowerfactorcorrectionpanel1 , batterychargerdcboard , lcsmushroomheadstay1 , lcsmushroomheadstay2 , lcsmushroomheadstay3 , distributiontransformer1 , dieselgeneratorset1 , dieselgeneratorfounation1 , ltbusduct1 , htswitchgearincomingpanel1 , htswitchgearincomingpanel2 , mainlightingdistributionboard1 , sublightingdistributionboard , highmastlighting1 , highmastlighting2 , lighteningfixture1 , ltpowercables1 , htpowercables1 , htpowercables2 , ltcontrolcables , junctionboxes1 , earthinglightningitems1 , aircondition1 ,, construction of 4th stage tailing pond, stripping and clearing the site of jungles, bushes, shrubs, wood etc., uprooting of rank vegetation, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level, removal of undesirable materials etc. including removal and disposal of debris at suitable locations with all leads and lifts, as decided by the engineer-in-charge., felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 30 cm girth upto and including 60 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 60 cm girth upto and including 120 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 120 cm girth upto and including 240 cm girth, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond.hard rock (blasting prohibited), earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. ordinary rock, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. hard rock (blasting prohibited), earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. hard rock (blasting prohibited), supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in bed later - 1 in layers not exceeding 250 mm above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to achieve required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge., supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying and transporting clay of specified quality and property (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and laying the same over random fill on upstream side of embankment in layers not exceeding 150 mm measured loose in proper profile, watering of each layer in stipulated manner to various heights and compacting each layer by mechanical means to achieve required degree of compaction as per specification and / or direction of the engineer-in-charge, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted thickness will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over clay lining on upstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note - payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over random fill on downstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting, spreading and compacting sand (average 100 mm thick) over stone pitching on upstream side of dam with all lead and lift including all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting and laying 1500 micron thick high density polyethelene (hdpe) sheet (textured on both sides) as lining over sand cushion layer on upstream side of dam, laid in position by qualified and skilled installer certified by the manufacturer and approved by the engineer-in-charge, with all lead and lift including sealing of joints (hot wedge single and dual track seaming and / or extrusion fillet seaming method or any other specialized method e.g. robotic two stitch welding etc.) of new sheets and sealing of new lining sheet with existing lining sheet with an overlap of approximately 1.0m, anchoring the new lining sheet on top of new embankment, maintaining quality control, conducting tests as per requirement of the specification, all complete as per drawing, provisions of specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of hdpe lining sheet. overlapping area, wastage etc. shall not be payable., supplying, transporting, laying and compacting uniformly graded stone aggregate filters within new embankment at all levels,incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting, laying and compacting uniformly graded coarse sand filters within new embankment at all levels incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge. (sand shall conform to is383). laying and compacting rock-fill toe dam on downstream side of embankment with following materials at all levels, all complete as per drawing, specification and direction of the engineer-in-charge., with rocks arranged by the contractor at his own cost (rate to include supply and transport also), earth work in back-filling including watering, ramming and compaction at all elevation around pipe support foundations, drain trenches etc. as per specifications and drawings and as directed by the engineer-in-charge with selected soils obtained from stacks under item no. 6 above for any lead within acquired area of tailing pond and dam. (filling shall be done in layers not exceeding 250 mm in loose thickness and watered as necessary. each layer of filling to be compacted to acheive a dry density of not less than 95% of the proctor density)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) in diversion drain and at outfall locations with interstices between adjacent stones filled-in with stones of proper size well-driven in order to ensure tight packing and complete filling of all interstices so that no chip can be removed by hand, with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., earthwork in filling using earth obtained from item nos. 3, 4, 5 and 6 above in construction of embankment of access roads (total four nos. access roads) connecting top of new tailing pond embankment in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) on sides of embankments of access roads with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying site machine batched plain cement concrete of 136 nominal mix (1 cement 3 coarse sand 6 graded stone aggregate with 20 mm and down aggregates) below foundations, walls, drains, pits etc. including mixing, transporting, placing in position, compacting to proper thickness and level, curirg, maintaining proper quality control including cost of admixtures in recommended proportions as per is 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability but excluding cost of shuttering work, all complete as per specifications, drawings and direction of the engineer-in-charge and including cost of form work., extra over item 30 bove for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. note (i) cost of shuttering and reinforcement shall be paid in respective items. (note the bidder has to quote only extra cost above the item 30 in the line item of 31, for example- if the cost of item 30 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 31 of the price part), providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 32 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 32 in the line item of 34, for example- if the cost of item 32 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 34 of the price part), extra over item 33 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying.concrete of m30 grade with minimum cement content of 350 kg/cum. (note the bidder has to quote only extra cost above the item 33 in the line item of 35, for example- if the cost of item 33 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 35 of the price part), providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 36 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 36 in the line item of 38, for example- if the cost of item 36 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 38 of the price part), extra over item 37 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m30 grade with minimum cement content of 350 kg/cum (note the bidder has to quote only extra cost above the item 37 in the line item of 39, for example- if the cost of item 37 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 39 of the price part) (another note-2 for item nos. 23, 24, 25 and 26 (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid through respective items.(iii) rendering of treatment at construction joint shall be carried out under supervision of manufacturer, cost of which shall be included in rate of these items. (iv) design of pipe support foundations, high mast foundations, miscellaneous pump foundations, transformer and other equipment foundations shall be under scope of the contractor. (v) contractor shall prepare design drawings and bar bending schedules for all rcc structures and submit the same to ucil for approval., supplying and laying precast reinforced cement concrete elements at any level using 20 mm and down graded crushed stones as coarse aggregate as per approved design mix including supply of materials / labour / tools and tackles etc. as required, formwork, mixing, laying, compacting to proper size and thickness, curing, storing, handling, transporting, erection without damage etc. but excluding cost of shuttering and reinforcement, all complete as per drawings, specifications and direction of the engineer-in-charge. concrete of m25 grade with minimum cement content of 330 kg/cum note (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid in respective items., add for consumption of extra / excess cement, if required, in design mix concrete (item no. 23 to 26 above) over the specified minimum cement content in respective items mentioned above. note i) requirement of extra cement with respect to the minimum cement content mentioned against respective items of approved design mix of concrete to achieve the characteristic strength for each design mix must be approved by engineer-in-charge during mix design stage based on laboratory test results which must also be approved by the engineer-in-charge..(ii) payment shall be on the basis of actual quantity of cement used in mix concrete executed., supplying, installing, dismantling and removing shuttering for foundations and substructures upto plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all complete as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, installing, dismantling and removing shuttering for superstructures above plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all completer as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in substructure upto plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in superstructure above plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, fabricating and installing mild steel anchor bolts / holding down bolts, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures including lugs in cement concrete, including necessary templates for keeping them in position and with welding, bending to the required shape, if necessary and prime coat and final painting whereever necessary/applicable, cost of scaffolding, as required, at all leads and lifts, storing, handling, transporting, erection without damage, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge. note i) all materials shall be from m/s sail, iisco, rinl and tata steel from their own plants rolled from virgin material only. ii) welding weights, connections, bolts and nuts etc. shall not be measured for payment but the cost of which shall be deemed to have been included in the quoted rate. iii) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers and also tests from third party, if required, to be arranged at no extra cost. iv) all holes will be made by drilling only. gas cutting of holes will not be permitted. v) electrodes manufactured by m/s advani oerlikon, esab india, indian oxygen and dandh secheron only shall be used., taking delivery from ucil, handling, transporting and installing in cement concrete at all elevations anchor bolts, anchors, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures, cost of scaffolding, as required, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge.. note i) the fabricated embedded items including lugs etc. shall be supplied by ucil., supplying, fabricating and installing structural steel work conforming to is 2062 (grade e250, quality b0) in all kinds of work for pipe and cable supports at top of dam/embankment at all elevations including straightening of raw steel (if required), cutting, making edge preparation, making connections at fabrication yard by welding / bolting, hoisting, fixing in position by welding / bolting, cleaning and preparation of all steel, storing, loading, transportation, unloading, delivery at erection site, maintening proper quality control, surface preparation for painting, erection, alignment and connections of all structures true to line, level, plumb and dimension including rectification, if any, splicing, applying a primer coat of approved make before erection and two coats of final paint of approved make after erection and final alignment, preparation of design d
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Sep 03, 2026 (Expire Today)
Tender Value :
172Cr
View Documents
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
LIVE TENDER
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
34.41L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17032486
Location : sonitpur , assam
Source : GEM Tenders
LIVE TENDER
tender for cement opc 43 grade packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , coarse aggregate 40 63mm graded , birck sub class b , water proofing compound , mild steel bars of size 6 to 8mm , mild steel bars of size 10mm dia , ms binding wire , white cement , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , 50mm thick sandwiched puf panels between 0 point 50mm pre painted galvalume pgi sheet , mesh for window and door , nut and bolt with w2 nos washer , rivets 75mm 500 nos pack , self tapping screw 25mm 1000 nos pack , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 50mm thick of size 6 point 00 x 1 point 05m , pre painted galvalume aluminum zinc coating gi corrugated steel sheet 0 point 50mm thick of size 2 point 00 x 0 point 6 m , paint red oxide primer , paint synthatic olive green , ceiling rose three terminal , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , cable pvc insulated electric cable multi stranded copper conductor of size 2 point 5 sqmm single core , cable pvc insulated electric cables multi stranded copper conductor of size 1 point 5 sqmm single core , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables multi stranded copper conductor of size 4 sqmm single core , pvc casing capping of size 1 inch medium grade , pvc casing capping of size 3 oblique 4 inch medium grade , steel screw full thread with rawl plug 1 1 oblique 2 inich size 100 nos pkt , pvc switch board size 7 inch x 4 inch for sockets and switches , pvc switch board size 8 inch x 10 inch for sockets and switches , pvc l bend and t junction joint for pvc casing and capping , switch socket combination multipurpose 2 in 1 15 amp 230 volts , switch socket combination 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor 10 sqmm 2 core , led bulk head fitting with led lamp 10 watts rechargeable , led tube light fittings 20w rechargeble 230v box type 4 feets , distribution box 8 way spn 240 volts copper bus bar and neutral link , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc round oblique square block , switch piano 5 amp 230 volts flush type one way , ceiling fan 1200mm sweep with regulator and incl clamps hooks holdfast and complete fittings , earthing items , lightening conductor , water dispenser 500watt with capactity of 3 point 2ltr cold water and 1 ltr of hot water storage with empty water cans of 20 ltr , fire extinguisher abc type portable net 2 kg capactiy, reloc of op wks assets large living shelter, as per technical specification and store list
Agency / Dept :
indian army
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17034587
Location : imphal , manipur
Source : GEM Tenders
LIVE TENDER
tender for led bulb , switch piano , switch socket , pvc switch , mcb amp , led tube , cp towel , pvc soap , pvc frame , synthetic , synthetic enamel , cement portland , concertina coil , turpentine oil , pixel bulk , modular socket , modular switch , insulation tape , cp cast , cp cast copper , batten holder , stainless steel , mild steel , air cleaner , fuel filter , coarse sand , coarse aggregate , lighting conductor , hdpe sand , switch socket combination , hammer ball , m seal , binding wire , tripal layer , pedestal fan , white cement , pvc sheathed , pvc sheathed unarmoured , bed switch , pvc casing , ceiling fan , pvc bib , guarde pipe , hinges inch , door handle , window handle , net door , plywood commercial bwr , plywood commercial bwr grade , plywood commercial bwr grade isi , pbs roll , glazed ceramic , wall mounted , security light , water dispensor , bricks sub , ms square , cloth wall , exhaust fan , led recessed , ordinary portland , self tapping , self tapping screws , toilet sheet , welding rod , cutting plier , mcb distribution , distemper oil , rain channer , white putty , plug top , mattress x , red oxide , mcb , mcb 16 amp , mcb amp 32 , mild steel corrugated , plywood commercial , water bottle , synthetic enamel paint , synthetic enamel paint high gloss , vitrified ceramic , shoe rack , modular socket outlet , modular switch piono , fan condenser , synthetic enamel paint high gloss superiour , acrilic sheet , acp sheet , metal cutting , glass pane , aggrigate mm , pvc swr , plastic tripal , oil filter , fan belt , fuel flexible , coolant genr , engine oil , fuel pipe , coolant gern , hours run , battery lead , benjo bolt , battery terminal , ac voltmeter , oil pressure , rubber coupling, mta stores, led bulb 11w, 220 240 volt make philips/ bajaj/ crompton greaves/ syska, switch piano 5 amp 240v isi marked make anchor/bajaj/hevells/philips, switch socket combination 5 amp 240v with gang box isi marked make anchor/bajaj/hevells/philips, pvc switch board 4 inch x 4 inch conforming to is, make prestoteak/ prestoplast/ supreme, mcb 32 amp sp 240 volts, make havells/ standard/ switch gear/ l&t/ legrand, led tube light 18w 4 fit long make phillips,crompton, cp towel rail 600 mm long 20mm dia with bracket, pvc soap tray make symet (prayag)/ supreme, pvc frame looking mirror 15 inch x 18 inch (select quality glass), synthetic enamel paint high gloss superiour quality black make assian/ burger/ narolac/ ici/ shalimar, synthetic enamel paint high gloss superiour quality white make assian/ burger/ narolac/ ici/ shalimar, mcb 10 amp sp with enclosure box mild steel, make havells/ standard/ switch gear/ l&t/ legrand, cement portland pozzolana cement ppc cement, is 1489 (part 2) for calcined clay based ppc and is 1489 (part 1) for fly ash-based ppc), packed in 50 kgs hdpe bags conforming to is 11652/2000. (make ambuja / acc / ultra tech/ dalmia/ ramco/ birla), concertina coil 1020mm dia, synthetic enamel paint high gloss superiour quality red make assian/ burger/ narolac/ ici/ shalimar, turpentine oil, pixel bulk head fitting in deep drawn anodized aluminium body, epoxy powder coated and heat resistant prismatic glass cover with specially designed gasket with led lamp 1 x 5 watt make bajaj/ havells/ philips, pvc switch board 8 inch x 10 inch conforming to is, make prestoteak/ prestoplast/ supreme, modular socket outlet multi purpose, 5 pin, 6 amps 240 volt isi marked make anchor/bajaj/hevells/philips, modular switch piano flush type 16 amps 240 volts single pole one way isi marked make anchor/bajaj/hevells/philips, insulation tape 9 mtr, cp cast copper alloy bib cock long body 15mm bore make cera/ somany/ jaguar/plumber/ sona/jindal, cp cast copper alloy stop cock 15mm bore make cera/ somany/ jaguar/plumber/ sona/jindal, batten holder bakelite isi marked make anchor/bajaj/hevells/philips, stainless steel peg (set of 5), modular switch piano flush type 6 amps 240 volts single pole one way isi marked make anchor/bajaj/hevells/philips, mild steel corrugated galvanised (cgi) sheet 10 fit x 3 fit, 0.63 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, synthetic enamel paint high gloss superiour quality og make assian/ burger/ narolac/ ici/ shalimar, air cleaner filter, fuel filter, coarse sand (stone dust) conforming to is 383 1978., coarse aggregate (crushed stone) 20mm graded conforming to is 383 1979, lighting conductor comp set, hdpe sand bag, switch socket combination 15 amp 240v with gang box isi marked make anchor/bajaj/hevells/philips, switch socket combination 5amp 240v with gang box isi marked make anchor/bajaj/hevells/philips, hammer ball pin, m seal, binding wire silver colour, mild steel wire nails assorted size 01 inch, 2 inch, 3 inch, 4inch., tripal layer hdpe water storage tank cylindrical vertical with closed top 500ltrs capacity conforming to is specification make sintex/ polycon/ ganga or equivalent., pedestal fan 600mm sweep make khaitan/ usha/ orient/ hevells/ crompton greaves, white cement make birla/ jk, pvc sheathed unarmoured stranded copper conductor cable of size 1.5sqmm conforming to isi marked (90m roll) make plaza/ paragon/ finolex/ havells/ polycab, pvc sheathed unarmoured stranded copper conductor cable of size 2.5sqmm conforming to isi marked (90m roll) make plaza/ paragon/ finolex/ havells/ polycab, led bulb 18w, 220240 volt make philips/ bajaj/ crompton greaves/ syska, bed switch 5 amp 240v isi marked make anchor/bajaj/hevells/philips, pvc casing caping 32mm, ceiling fan with blade make bajaj,usha, hdpe sand bags of size 14 inch x 36 inch, weight not less than 60 gms., pvc sheathed unarmoured stranded copper conductor cable of size 1sqmm conforming to isi marked (90m roll) make plaza/ paragon/ finolex/ havells/ polycab, pvc bib cock long body 15mm bore make cera/ somany/ jaguar/plumber/ sona/jindal, guarde pipe 25mm, hinges 4 inch, door handle, window handle, net door fixed with wooden frame complete framing of size 32 inch x 80 inch (wiremesh door), plywood commercial bwr grade isi marked of size 6 fit x 3 fit x 12mm thick make green ply/ bhutan ply/ national/ kitply, plywood commercial bwr grade isi marked of size 8 fit x 4 fit x 12mm thick make green ply/ bhutan ply/ national/ kitply, plywood commercial bwr grade isi marked of size 8 fit x 4 fit x 6mm thick make green ply/ bhutan ply/ national/ kitply, pbs roll 10mtr long, glazed ceramic coloured tiles of size 600mm x 600mm x 9 10mm thick make kajaria/ asian/ orient bell/ h&r johnson/ somany, pvc sheathed unarmoured stranded copper conductor cable of size 1.5sqmm conforming to isi marked (90m roll) make plaza/ paragon/ finolex/ havells, wall mounted fan 300mm sweep conforming to is make khaitan/ usha/ orient/hevells/ crompton greaves, security light fitting for 50 watt led make anchor/hevells/syska/bajaj, water dispensor with bottels 20 ltr, bricks sub class b old size best locally available (minimum compressive strength 75 kg/sqcm, water absorption not more than 20 percentage), ms square pipe iron 2inch 5mm thik, pvc frame looking mirror 18 inch x 24 inch (select quality glass), cloth wall hanger steel, exhaust fan 300mm sweep conforming to is, make khaitan/ usha/ orient/ hevells/ crompton greaves, bed switch 5 amp isi marked make anchor/bajaj/hevells/philips, led recessed light 2f x 2f ceilling warm light isi marked make anchor/bajaj/hevells/philips, ordinary portland cement 43 grade in hdpe bags of 50kg each, confirming to is 269 1976 make ultratech/bangur/ ambuja/birla/j k super, self tapping screws with ppdm washer 50mm long, self tapping screws with ppdm washer 100mm long, toilet sheet cover, welding rod (pkt of 100 electrodes), synthetic enamel paint high gloss superiour quality red colour make assian/ burger/ narolac/ ici/ shalimar, synthetic enamel paint high gloss superiour quality white colour make assian/ burger/ narolac/ ici/ shalimar, mild steel corrugated galvanised (cgi) sheet 10 fit x fit, 0.63 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, ms square pipe iron 1inch 5mm thik, cutting plier taparia, mcb distribution box 8 way conforming to is 13032 make havells/ standard/ switch gear/ l&t/ legrand, pvc sheathed unarmoured stranded copper conductor cable of size 1sqmm conforming to isi marked (90m roll) make plaza/ paragon/ finolex/ havells, pvc sheathed unarmoured stranded copper conductor cable of size 2.5sqmm conforming to isi marked (90m roll) make plaza/ paragon/ finolex/ havells, distemper oil emulsio d44 k73n/ acrylic distemper make asian/ berger/ ici/ shalimar/ narolac, ms square pipe iron 1.5 inch, coarse sand (dimapur sand) conforming to is 383 1978., rain channer with bracket, synthetic enamel paint high gloss superiour quality yellow colour make assian/ burger/ narolac/ ici/ shalimar, white putty birla/ jk, plug top 3 pin 6 amp male female, make havells/ standard/ switch gear/ l&t/ legrand, pedestal fan 400mm sweep make khaitan/ usha/ orient/ hevells/ crompton greaves, mattress 6x3x100mm make kurlon/ sleepwell, synthetic enamel paint high gloss superiour quality og colour make assian/ burger/ narolac/ ici/ shalimar, red oxide primer, mcb distribution box 6 way conforming to is 13032 make havells/ standard/ switch gear/ l&t/ legrand, mcb 32 amp dp 240 volts, make havells/ standard/ switch gear/ l&t/ legrand, mcb 16 amp sp 240 volts, make havells/ standard/ switch gear/ l&t/ legrand, mcb 32 amp sp 240 volts, make havells/ standard/ switch gear/ l&t/ legrand, mild steel corrugated galvanised (cgi) sheet 18 fit x 3 fit , 0.63 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, mild steel corrugated galvanised (cgi) sheet 12 fit x 3 fit, 0.63 mm thick isi marked make tata/sail/bhushan/jindal or equivalent, plywood commercial bwr grade isi marked of size 4 fit x 8 fit, 12mm thick make green ply/ bhutan ply/ national/ kitply, water bottle for dispensor 20 ltr, synthetic enamel paint high gloss superiour quality yellow colour make assian/ burger/ narolac, synthetic enamel paint high gloss superiour quality red colour make assian/ burger/ narolac, synthetic enamel paint high gloss superiour quality white colour make assian/ burger/ narolac, vitrified ceramic coloured tiles of size 600mm x 600mm x 9,10mm thick make kajaria/ asian/ orient bell/ h&r johnson/ somany, shoe rack, modular socket outlet multi purpose 2 in 1, 6 pin, 16/ 6 amps 240 volt isi marked make anchor/bajaj/hevells/philips, modular switch piano flush type 16 amps 240 volts single pole one way isi marked make anchor/bajaj/hevells/philips, fan condenser 2.15uf, synthetic enamel paint high gloss superiour quality green colour make assian/ burger/ narolac, synthetic enamel paint high gloss superiour quality black colour make assian/ burger/ narolac, acrilic sheet 4 fit x 6 fit 6mm, acp sheet 8 fit x4 fit x3mm, m seal (100 gm), metal cutting disc 4 inch dia, glass pane 3mm thick make ashi/modiguard, pvc switch board 6 inch x 4 inch conforming to is, make prestoteak/ prestoplast/ supreme, coarse sand conforming to is 383 1978., aggrigate 20mm, pvc (swr) pipe 50m dia 3m long with socket end isi marked make kissan/ prince, mcb 63 amp dp 240 volts, make havells/ standard/ switch gear/ l&t/ legrand, insulation tape 3/8 inch wide (9 mtr roll) make anchor/steelgrip, plastic tripal 16ft x 20ft, fuel filter,genr set 20 kva krilosker, oil filter,genr set 20 kva krilosker, air cleaner filter,genr set 20 kva krilosker, fan belt,genr set 20 kva krilosker, fuel flexible pipe,genr set 20 kva krilosker, coolant,genr set 20 kva krilosker, engine oil 10 w 30,genr set 20 kva krilosker, fuel filter,gern set 30 kva, krilosker, oil filter,gern set 30 kva, krilosker, air cleaner element ,gern set 30 kva, krilosker, fan belt,gern set 30 kva, krilosker, fuel pipe line,gern set 30 kva, krilosker, coolant,gern set 30 kva, krilosker, hours run meter,gern set 30 kva, krilosker, engine oil 10 w 30,gern set 30 kva, krilosker, fuel filter,gern set 50 kva, krilosker, oil filter,gern set 50 kva, krilosker, air cleaner element ,gern set 50 kva, krilosker, fan belt,gern set 50 kva, krilosker, fuel pipe line,gern set 50 kva, krilosker, coolant,gern set 50 kva, krilosker, engine oil 10 w 30,gern set 50 kva, krilosker, hours run meter,gern set 50 kva, krilosker, air cleaner fillter genr set 7.5 kva, fuel filter genr set 7.5 kva, fuel pipe line (filter to pump),, battery lead negative,genr set 7.5 kva, battery lead positive,genr set 7.5 kva, oil filter,genr set 7.5 kva, fuel pipe line (tank to filter),genr set 30 kva kirloskar, fuel filter genr set 30 kva make kirloskar, fuel pipe line (filter to pump),genr set 30 kva kirloskar, oil filter,genr set 30 kva kirloskar, fuel pipe line (tank to filter),genr set 20 kva kirloskar, benjo bolt no. 10,17,19mm,genr set 20 kva kirloskar, battery terminal,genr set 20 kva kirloskar, ac voltmeter 440v,genr set 20 kva kirloskar, oil pressure guage,genr set 20 kva kirloskar, rubber coupling,genr set 20 kva kirloskar, fuel pipe line (filter to pump),genr set 40 kva kirloskar, fuel filter,genr set 40 kva kirloskar, fan belt,genr set 40 kva kirloskar, oil filter,genr set 40 kva kirloskar
Agency / Dept :
indian army
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
13.75L
View Documents
T18 Ref No : 16975937
Location : cachar , assam
Source : GEM Tenders
LIVE TENDER
tender for provision for distribution of building material for construction of community hall cement 50 kg bag , stone aggregate , coarse sand , bricks , steel rod , ms steel pipe various size , pre painted steel sheet 0.50mm thick 4000mm long , roofing ridge , roofing screw 50mm long , wooden scantling , ceiling board 4ft x 4ft , wooden beading 40 x 12mm , nails assorted size , wooden paneled door 40 mm thick with paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete , wooden paneled window 35mm thick with glass paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete , distemper white , primer , painting brush 4 , 1 point 5 sq mm frls pvc insulated copper conductor single core cable , 5 or 6 amps modular switch , 15 or 16 amps modular switch , 3 pin 5 or 6 amps modular socket outlet , 6 pin 15 or 16 amps modular socket outlet , 3 module pvc box alongwith modular base and cover plate , 8 module pvc box alongwith modular base and cover plate , ceiling rose , pvc batten angle holder , led tube light fittings 20 watt , led bulb 9 watt , ceiling fan 1200mm , mcb db 6 way double door sp , 16 amps rating 240 or 415 volts c curve mcb , 40a rating double pole 240 v mcb , gi earth plate 600 mm x 600 mm x 6mm thick including accessories , cashing capping , 10 sq mm pvc sheathed aluminum conductor twin core cable, provision for distribution of building material for construction of community hall, cement 50 kg bag, stone aggregate, coarse sand, bricks, steel rod, ms steel pipe various size, pre painted steel sheet 0.50mm thick 4000mm long, roofing ridge, roofing screw 50mm long, wooden scantling, ceiling board 4ft x 4ft, wooden beading 40 x 12mm, nails assorted size, wooden paneled door 40 mm thick with paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete, wooden paneled window 35mm thick with glass paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete, distemper white, primer, painting brush 4, 1 point 5 sq mm frls pvc insulated copper conductor single core cable, 5 or 6 amps modular switch, 15 or 16 amps modular switch, 3 pin 5 or 6 amps modular socket outlet, 6 pin 15 or 16 amps modular socket outlet, 3 module pvc box alongwith modular base and cover plate, 8 module pvc box alongwith modular base and cover plate, ceiling rose, pvc batten angle holder, led tube light fittings 20 watt, led bulb 9 watt, ceiling fan 1200mm, mcb db 6 way double door sp, 16 amps rating 240 or 415 volts c curve mcb, 40a rating double pole 240 v mcb, gi earth plate 600 mm x 600 mm x 6mm thick including accessories, cashing capping, 10 sq mm pvc sheathed aluminum conductor twin core cable
Agency / Dept :
assam rifles
Due Date :
Sep 15, 2026 (12 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17058306
Location : kinnaur , himachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for ordinary portland cement grade 43 , stone aggregate shall be crushed stone 20mm , coarse sand , stone aggregate shall be crushed stone 40mm , rr stone , tmt steel bar 16mm dia , tmt steel bar 12mm dia , tmt steel bar 10mm dia , tmt steel bar 8 mm dia , binding wire 20 gauge 0 point 9mm , shuttering water proof plywood of size 8 feet x 4 feet and 12mm thickness , nails 2 inch , nails 3 inch , nails 5 inch , quick setting compound , 2nd class hardwood , wooden ballies 75mm to 100 mm , pbs roll , bitumen , water proofing compound , hdpe film of 400 micron thickness , loop hole of size 2130 x 1067 mm , wooden scantling 3 point 20m , steel door of size 900x1800 mm , lightning conductor , cloth hanger , ms round pipe 150mm dia , ms round pipe 20mm dia , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 60mm , 75mm dia pvc pipe for weep hole , ms plate 10 mm , ms plate 20 mm , shredded rubber 150 mm , pvc single core 1 point 5 sqmm , pvc single core 2 point 5 sqmm , cable pvc insulated and pvc 1100v grade , pvc conduit pipe round shape 50 mm dia and 3 point 00 mm , pvc l bend for 20 mm conduit pipe , pvc t 20 mm for conduit pipe , pvc square box 4 inch x4 inch , pvc elbow 20 mm dia , dry wall screw 50 mm long , mcb single pole 230v ac , switch piano flush type15 amp , pvc ceiling rose 2 by 3 terminal , insulation tape 25 mm , mcb box 12 way , stainless steel u clamp for 20 mm , isolator 63 amp , earthing of 3 mm dia , stone aggregate , tmt steel bar 16mm , tmt steel bar 12mm , tmt steel bar 10mm , tmt steel bar 8 mm , 2nd class hardwood plain , wooden ballies 75mm to 100 mm dia 3m long , synthetic enamel paint , turpentine oil , loop holes of size 600x500mm , ms plate 10 mm for roofing layer , ms plate 20 mm for roofing layer , 75mm dia pvc pipe , cable pvc insulated , pvc conduit pipe round shape 50 mm , pvc square box 4 inch x 4 inch , insulation tape 25 mm width 9 mtr , stainless steel u clamp for 20 mm pvc conduit pipe , isolator 63 amp dp , earthing of building provided using 3 mm dia , ordinary portland cement , stone aggregate shall be crushed stone 10mm to 12mm , coarse sand , supply and installation and testing of solar hybrid power plant, 04 x adl, store list items to be supplied as per technical specifications mentioned in pdf document
Agency / Dept :
armed forces tribunal AFT
Due Date :
Sep 11, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16687064
Location : kinnaur , himachal pradesh
Source : GEM Tenders
tender for cement bags 50 kgs , sand coarse , crushed stone aggregate 20mm , tmt steel bar 8 mm , tmt steel bar 10 mm , tmt steel bar 12 mm , tmt steel bar 16 mm , app based polymeric membrane , scantling 3 inch x 3 inch seasoned first class hard wood 2 point 30 mtr , 75mm dia pvc pipe , shuttering plywood 12mm , binding wire 20 gauge 0 point 9mm , nails 2 inch , nails 3 inch , nails 4 inch , water proofing compound , quick setting compound , bitumen , 10mm thick ms plate , shredded rubber 150 mm , 25mm thick ballestic panel , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , anti rust paint , paint brush , welding rod 3 point 6mm , ms door of size 1200 x 2100mm , pvc door , geotextile , lightening conductor , rifle racks , fire extinguisher , oxygen cylinder kit with trolley , tarpaulin , sleeping bed , mattress , aluminium cable for welding machine 2 core 10 sqmm , portable 2 point 5 kva solar system , led tube light fiting , swich socket 5 amp , switch socket combination 5 by15 amp , pvc switch board 8 inch x 10 inch , pvc switch board 6 inch x 4 inch , pvc casing and capping of size 25 mm , pvc casing capping tee bend , pvc casing capping l bend , pvc square box 4 inch x 4 inch , elect wire single core copper conductor 1 point 5 sqmm , elect wire single core copper conductor 2 point 5 sqmm , elect wire two core 6 sqmm , mcb box 6 way spn , mcb 10 to 32 amp sp , change over switch 63 amp 3 phase four pole , tape insulation half inch x 15 mtr , ceiling rose , inline or mix flow exhaust fan with all fittings and ducting items , stainless steel iwc wash down water closet pan , stainless steel wash hand basin , angle valve 15mm , bib cock 15mm , pillar cock 15mm , stop cock 15mm , stainless steel grating with hole 75mm , stainless steel grating without hole 75mm , floor trap 75mm , pvc pipe 75mm , pvc pipe 110mm , pvc p trap 110mm dia , pvc connection 600mm , pvc short connection pipe 110mm , pvc bend with oval access door 110mm , pvc plain bend 110mm dia , pvc t 110mm dia , pvc socket 110mm dia , pvc socket 75mm , pvc bend 75mm , ppr pipe 32mm , ppr pipe 20mm , puf insulated frp water tank capacity 1000 ltrs , ppr gate valve of 32mm , ppr elbow 20mm , ppr tank connector inner dia 32mm , ppr reducer 32 x 20mm , ppr tee reducer 32 x 20mm , ppr elbow 32mm , ppr socket 32mm , ppr union 32mm , ppr tee 32mm , ppr tee 20mm , ppr socket 20mm , ppr union inner dia 20mm , ppr wall clamp dia 25mm , ppr wall clamp dia 15mm , ppr brass elbow 20mm , ppr brass socket 20mm , ppr brass fta 20mm , ppr brass mta 20mm , ss nipple 15mm x 25 mm , ppr tee brass 20mm , readymade septic tank for toilet 2000 ltr , taflon tape , cut off machine 14 inch , esab arc 200i , durmut 5 kg , hand gloves rubber best quality , pan motor 18 inch , phawrah with handle , measuring tape 03 mtr , wiremess for seiving sand 01 mtr , axes picks 03 kg head with handle , crow bar hexagonal 1200mm long x 40mm , gumboot various size , spirit level 10 inch , nylon mason thread 100 mtr , plumbob steel with lasing , water level pipe , hammer 10 kg with handle , tmt bar bending frame , tmt rod bending handle , wooden gurmala of size 8 inch x 4 inch , aluminium study of size 3 inch x 2 inch and 6 feet , steel gurmala of size 8 inch x 4 inch , steel bucket 15 ltr capacity , iron cutter blade 14 inch , iron cutter, 13 x ug harden living shelter, store list items to be supplied as per technical specifications mentioned in pdf document, electric items to be supplied as per technical specifications mentioned in pdf document, ppr items to be supplied as per technical specifications mentioned in pdf document
Agency / Dept :
armed forces tribunal AFT
Due Date :
Aug 21, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16687069
Location : kinnaur , himachal pradesh
Source : GEM Tenders
tender for cement bags 50 kgs , sand coarse , crushed stone aggregate 20mm , tmt steel bar 8 mm , tmt steel bar 10 mm , tmt steel bar 12 mm , tmt steel bar 16 mm , app based polymeric membrane , scantling 3 inch x 3 inch seasoned first class hard wood 2 point 30 mtr , 75mm dia pvc pipe , shuttering plywood 12mm , binding wire 20 gauge 0 point 9mm , nails 2 inch , nails 3 inch , nails 4 inch , water proofing compound , quick setting compound , bitumen , 10mm thick ms plate , shredded rubber 150 mm , 25mm thick ballestic panel , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , anti rust paint , paint brush , welding rod 3 point 6mm , ms door of size 1200 x 2100mm , pvc door , geotextile , lightening conductor , rifle racks , fire extinguisher , oxygen cylinder kit with trolley , tarpaulin , sleeping bed , mattress , aluminium cable for welding machine 2 core 10 sqmm , portable 2 point 5 kva solar system , led tube light fiting , swich socket 5 amp , switch socket combination 5 by15 amp , pvc switch board 8 inch x 10 inch , pvc switch board 6 inch x 4 inch , pvc casing and capping of size 25 mm , pvc casing capping tee bend , pvc casing capping l bend , pvc square box 4 inch x 4 inch , elect wire single core copper conductor 1 point 5 sqmm , elect wire single core copper conductor 2 point 5 sqmm , elect wire two core 6 sqmm , mcb box 6 way spn , mcb 10 to 32 amp sp , change over switch 63 amp 3 phase four pole , tape insulation half inch x 15 mtr , ceiling rose , inline or mix flow exhaust fan with all fittings and ducting items , stainless steel iwc wash down water closet pan , stainless steel wash hand basin , angle valve 15mm , bib cock 15mm , pillar cock 15mm , stop cock 15mm , stainless steel grating with hole 75mm , stainless steel grating without hole 75mm , floor trap 75mm , pvc pipe 75mm , pvc pipe 110mm , pvc p trap 110mm dia , pvc connection 600mm , pvc short connection pipe 110mm , pvc bend with oval access door 110mm , pvc plain bend 110mm dia , pvc t 110mm dia , pvc socket 110mm dia , pvc socket 75mm , pvc bend 75mm , ppr pipe 32mm , ppr pipe 20mm , puf insulated frp water tank capacity 1000 ltrs , ppr gate valve of 32mm , ppr elbow 20mm , ppr tank connector inner dia 32mm , ppr reducer 32 x 20mm , ppr tee reducer 32 x 20mm , ppr elbow 32mm , ppr socket 32mm , ppr union 32mm , ppr tee 32mm , ppr tee 20mm , ppr socket 20mm , ppr union inner dia 20mm , ppr wall clamp dia 25mm , ppr wall clamp dia 15mm , ppr brass elbow 20mm , ppr brass socket 20mm , ppr brass fta 20mm , ppr brass mta 20mm , ss nipple 15mm x 25 mm , ppr tee brass 20mm , readymade septic tank for toilet 2000 ltr , taflon tape , cut off machine 14 inch , esab arc 200i , durmut 5 kg , hand gloves rubber best quality , pan motor 18 inch , phawrah with handle , measuring tape 03 mtr , wiremess for seiving sand 01 mtr , axes picks 03 kg head with handle , crow bar hexagonal 1200mm long x 40mm , gumboot various size , spirit level 10 inch , nylon mason thread 100 mtr , plumbob steel with lasing , water level pipe , hammer 10 kg with handle , tmt bar bending frame , tmt rod bending handle , wooden gurmala of size 8 inch x 4 inch , aluminium study of size 3 inch x 2 inch and 6 feet , steel gurmala of size 8 inch x 4 inch , steel bucket 15 ltr capacity , iron cutter blade 14 inch , iron cutter, 23 x ug harden living shelter, store list items to be supplied as per technical specifications mentioned in pdf document, electric items to be supplied as per technical specifications mentioned in pdf document, ppr items to be supplied as per technical specifications mentioned in pdf document
Agency / Dept :
armed forces tribunal AFT
Due Date :
Aug 21, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16514340
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for schedule1 , schedule2 , schedule3 , schedule4 , schedule5 , schedule6 , schedule7 , schedule8 , schedule9 , schedule10 , schedule11 , schedule12 , schedule13 , schedule14 , schedule15 , schedule16 , schedule17, supply and installation of ac, supply and fixing of following ways surface recess mounting vertical type 415 v tpn 12 way mcb distribution board of sheet steel dust protected duly powder painted inclusive of 200 a tinned copper bus bar common neutral link earth bar din bar and mounting 5 a to 32a as per description in nit, supply and layingclampingdrawing of 35c x 50 sqmm 11 kv grade lt cable xlpe insulated pvc sheathed armored pvc overall sheathed multi stranded aluminium conductor cable conforming to is 7098parti as per description in nit, supply and wiring for circuit sub main wiring along with earth wire with the following sizes fr pvc insulated copper conductor single core cable in surface recessed medium class pvc conduit as required complete with all labour material tools tackles as directed by engineer in charge as per description in nit, core cutting for installation of 20 tr 3 star rated split ac unit as directed by engr ic complete with all labour tools and tackles as per description in nit, supply fixing testing of push button type motor starter for ac units along with suitable base complete with all materials tools and tackles as directed by engric make anchor cona millonmk, supply and fixing suitable size gi box with modular plate and cover in front on surface or in recesses including providing and fixing 6 pin 56 1516 a modular socket and 1516 a modular switch connections etc as per description in nit, supply installation testing and commissioning of 50 kva stabilizers to work on 170-240vac with time delay relay and over load protection as directed by engricmake unistabv guardreal guarditl as per description in nit, supply fixing connecting and commissioning of lt 3 phase and neutral floor mounted in door type thickness of 3 mm with hinged door of following switch gears of approved brands with necessary 600 amps alluminium bus bar arrangement witas per description in nit, supply and layingclampingdrawing of 35c x 240 sqmm 11 kv grade lt cable xlpe insulated pvc sheathed armored pvc overall sheathed multi stranded aluminum conductor cable conforming to is 7098part-i as as per description in nit, supply and providing of pcc 136 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate including mixing depositing in position tamping finishing and curing for basepole concreting road cutting etc as directed by engineer in charge including all labour and tools as per description in nit, excavation of pit trench in soft loose soil of required width and depth for erection of bg rail poles spun poles struts or for laying ht lt underground cables gi pipes etc and refilling the pit trench and made good to match with the surroundings including cleaning the debris as directed complete all labour and material as per description in nit, supply and providing earth station using 3 meters long 80 mm medium grade gi pipe in a masonry enclosure of duly filling with alternate layers of coal and charcoal complete with gi funnel and covering with pcc cover and conforming to is 3043 as directed by engineer in charge including all labour and material as per description in nit, supply and laying 50 mm x 6 mm gi strip as strip earth electrode including connection terminating with gi nut bolt spring washer etc as required jointing shall be done by overlapping and with 2 sets of gi nut bolt spring washer spaced at 50mm as directed by engineer in charge as per description in nit, supply installation testing and commissioning of 20 tr with 5 star bee rating air cooled hi wall split type air conditioners complete with indoor unitidu outdoor unit odu surface concealed copper refrigerant piping with insulation closed cell elastomeric nitrile rubber tubular pipe section as per description in nit, supply and running of 2 runs of copper tube of size 12inch x 14inch for section and liquid line between indoor outdoor unit of split ac unit with foam as as per description in nit, supply installation testing commissioning of eas 4 stainless steel air curtain 4 feet air through 21 ms including door closers 230 volts 50hz as per description in nit, supply and fixing of set of ms stand for above ac unit complete with all materials labour tools and tackles as directed by engric as per description in nit
Agency / Dept :
visakhapatnam port trust VPT
Due Date :
Aug 24, 2026
Tender Value :
32.28L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Aggregate Base Coarse. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Aggregate Base Coarse sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Aggregate Base Coarse Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Aggregate Base Coarse, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Aggregate Base Coarse Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Aggregate Base Coarse Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Aggregate Base Coarse.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Aggregate Base Coarse depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Aggregate Base Coarse Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Aggregate Base Coarse bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Aggregate Base Coarse. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Aggregate Base Coarse, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Aggregate Base Coarse, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Aggregate Base Coarse?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Aggregate Base Coarse tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Aggregate Base Coarse?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Aggregate Base Coarse, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Aggregate Base Coarse is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All