sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

11Latest Abrasive mesh Tenders List

Latest Abrasive mesh Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Abrasive mesh tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Abrasive mesh tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Abrasive mesh Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Abrasive mesh tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Abrasive mesh Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Abrasive mesh Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Abrasive mesh Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Abrasive mesh tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Abrasive mesh Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Abrasive mesh sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Abrasive mesh tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Abrasive mesh tenders.

Is EMD mandatory for all Abrasive mesh tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Abrasive mesh work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Abrasive mesh tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Abrasive mesh Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16813660
Location : gandhinagar , gujarat
Source : GEM Tenders
LIVE TENDER
tender for abrasive (type: 80 mesh) for water jet cutting machine
Agency / Dept :
institute for plasma research IPR
Due Date :
Sep 09, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16933458
Location : bhopal , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for supply installation building material as per attached specifications - wooden flush door shutter , door handle , door tower bolt , sliding bolt l drop , door stoper , stainless steel wire mesh 1point5 x 5 mtr each in roll , door hinge , stainless steel 304 curtain pipe sider and mounting bracket length 1 meter , black screw 1 inch , half thread wood screw 50 mm , bombey wire nail 25 mm , looking miror 450x600 mm each in size , looking miror holder clip , nail 1 inch china , toughened glass for window , putty for use on window frame , almira ss door handle , 6 mm plywood 1point 22x2point 44 mtr each in size , 19 mm plywood 0point 915x2point 135 mtr each in size , wood cutter blade , hex bolt spring channel nut fastener seam bolt , sand 0point6 cum in piece of bag , stone aggregates 20 mm in 600 kg packet each use density of agg 1500 kg m3 , cement , bricks , precast concrete block pavour block , floor tiles , sand paper , putti blade applicator , paint brush , distemper 20 ltr bucket each , turpentine oil , red oxide , wall putti , interior paint , exterior paint , enamel paint , welding rod , item1 , item2 , item3 , item4 , item5 , item6 , item7 , item8 , item9 , item10 , item11 , item12 , item13 , item14 , item15 , item16 , item17 , item18 , item19 , item20 , item21 , item22 , item23 , item24 , item25 , item26 , item27 , item28 , item29 , item30 , item31 , item32 , item33 , item34 , item35 , item36 , item37 , item38 , bib cock 15 mm , angle valve 15 mm , pillar cock 15 mm , flexible drain hose 32 mm , connector pipes for wash basin 10 mm , pipe 40 mm for water supply , elbow 32 mm , socket 32 mm , reducer coupler 20 mm , pipe 25 mm for water supply , elbow 25 mm , socket 25 mm , union 25 mm , tee 25 mm , cpvc pipe 32mm , elbow 20 mm , socket 20 mm , union 20 mm , tee 20 mm , male thread tee 25 mm , female thread tee 20 mm , elbow 40 mm , teflon tape , m seal , gate valve 32 mm , float valve 20 mm , male thread elbow 25 mm , female thread elbow 32x16 mm , shower rose , healt fauset , western toilet seat cover , gi socket union 15 mm , gi equal tee 20 mm , gi socket union 20 mm , gi equal elbow 20 mm , gi socket union 25 mm , stop valve 15 mm , wash basine bracket corner bracket , toilet seat band p trap , d joint 80 mm dia , pvc tank 1000 ltr, supply installation building material as per attached specifications, solid core wooden flush door shutter, commercial face, standard thickness (30-35mm), anodized aluminum / ss door handle, d-shape or pull design, standard size, anodized aluminum / ss door tower bolt, barrel type, length 150-200mm, anodized aluminum / ss sliding door bolt (l-drop lock system), heavy duty, rubber-tipped aluminum / ss door stopper, floor or wall mounted, stainless steel ss-304 wire mesh / net, roll size 1.5 meter width x 5 meter length, ss butt hinges / door hinges, heavy duty, size 4x3x3mm or standard, ss-304 curtain pipe (1 meter length) with side holders and wall mounting brackets, black phosphate drywall screws, counter-sunk head, 1.5 inch length, half threaded steel wood screws, countersunk head, 50 mm length, bombay style wire nails / steel nails, 25 mm length, high-quality clear glass looking mirror, size 450 mm x 600 mm, polished edges, cp brass or plastic mirror fixed mounting clips / grippers, china nails / hardened steel concrete nails, 1 inch length, clear/frosted toughened safety glass for windows, standard 4-6mm thickness, linseed oil based window putty / glazing compound for glass fixing, stainless steel small d-handle or pull handle for wardrobe/almirah doors, commercial grade mr/bwp plywood, 6 mm thickness, dimensions 1.22 m x 2.44 m, commercial grade mr/bwp plywood, 19 mm thickness, dimensions 0.915 m x 2.135 m, tct (tungsten carbide tipped) circular saw wood cutter blade, standard diameter, hex head bolt with spring channel nut and seam bolt fasteners for strut channels, river sand / fine aggregate for plastering and concrete, packed in standard 0.6 cum bags, crushed stone aggregates, 20 mm size, packed in 600 kg bags (density approx 1500 kg/m3), ordinary portland cement (opc 43/53) or ppc cement, standard 50 kg bag, standard red clay bricks / fly ash bricks, class 7.5 or above strength, precast concrete interlocking paver blocks / tiles, standard thickness (60-80mm), ceramic / vitrified floor tiles, standard anti-skid surface finish, emery sand paper / silicon carbide abrasive paper, assorted grits, metal/plastic putty blade applicator knife for wall paste smoothing, flat paint brush with synthetic/natural bristles, assorted sizes (2, 3, 4 inch), typical specifications and details for a standard 20-liter (approx. 20 kg) bucket of acrylic distemper, mineral turpentine oil (mto) thinner for oil-based paints, 20 liter bucket/can, red oxide primer for anti-rust protection on ms/iron surfaces, 20 liter pack, acrylic wall putty powder/paste for internal/external wall smoothness, 25/40 kg bags, exterior weatherproof emulsion paint, anti-algal and uv resistant, 20 liter pack, synthetic enamel paint for wood and metal surfaces, glossy/matt finish, arc welding electrodes / rods (e.g., gauge 10/12), standard box packet
Agency / Dept :
central reserve police force CRPF
Due Date :
Sep 12, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17032978
Location : leh , ladakh
Source : GEM Tenders
LIVE TENDER
tender for extinguisher fire mechanical foam 9 ltr , quick release knife , tape paper brown gummed 40mmx200mm , wire steel mild drawn galvanized 2.00mm , abrasive cloth glass grit 180 , adhesive padding glue , electrodes welding , wire steel mild annealed 1.60mm , nails steel wire round 70mm x 3.15mm , nails steel wire round 30mm x 2mm , nails steel wire round 50mm x 2.5mm , nails steel wire round 25mm x 2mm , nails steel wire round 100mm x 5mm , swages top smiths 16mm , razor disposable blade , polythene fillm .25mm thick x 1m width , shirts cotton white for cook , cap food handler size-7 , ecsg 50 mm mild bronze green , gloves rubber s 8 , handles axes felling 815mm , handle phawrah wooden , ec net jute 11x8m large mesh 75mm , cloth sponge cotton , ec net jute5.5 x 4m large mesh 50mm , ecsg 50mm grass green, extinguisher fire, extinguisher fire mechanical foam 9 ltr, quick release knife, tape paper brown gummed 40mmx200mm, wire steel mild drawn galvanized 2.00mm, abrasive cloth glass grit 180, adhesive padding glue, electrodes welding, wire steel mild annealed 1.60mm, nails steel wire round 70mm x 3.15mm, nails steel wire round 30mm x 2mm, nails steel wire round 50mm x 2.5mm, nails steel wire round 25mm x 2mm, nails steel wire round 100mm x 5.0mm, swages top smiths 16mm, razor disposable blade, polythene fillm .25mm thick x 1m width, shirts cotton white for cook, cap food handler size-7, ecsg 50 mm mild bronze green, gloves rubber s 8, handles axes felling 815mm, handle phawrah wooden, ec net jute 11x8m large mesh 75mm, cloth sponge cotton, ec net jute5.5 x 4m large mesh 50mm, ecsg 50mm grass green
Agency / Dept :
directorate general defence estates DGDE
Due Date :
Sep 10, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17029589
Location : panchkula , haryana
Source : GEM Tenders
LIVE TENDER
tender for proc of drugs and consumables disposable gown , disposable shoe cover for shoe cover dispensing machine pkt of 100 , broach nerve canal barbed assorted size pkt of 12 , fine and medium abrasive diamond aluminium coated strip , composite finishing and polishing kit , dentin replacement material consisting of calcium silicate based , resorbable alloplastic graft calcium phosphosilicate novabone putty , chairside silicon material for relining retentive kit , cotton wool absorbent pkt of 50 gm , pro matrix band curved assorted yellow orange band with holder pkt of 10 , pro matrix band 4.5 mm narrow band green with holder pkt of 10 , electric tooth brush medium , liquid dam 4 syg , spirit bott of 1 ltr 9alcohol , artificial saliva , miracle mix , monopolar tips for cautery unit , bipolar tips for cautery unit , debonding kit for orthodonitcs , tungsten carbide orthodondic debonding bur straight fissure for airotor , tungsten carbide orthodontic debonding bur tapered fissure for airotor , tips for paracore pkt of 50 , bur diamond 201 tapered fissure , hand disinfectant bott of 500ml , towel ot green , savlon solution bott of 500 ml , pedodontic tooth paste , sterile synthetic absorbable suture vicryl 3 0 3 oblique 4reverse cutting , sterile synthetic absorbable suture vicryl 3 0 3 oblique 4 cutting , reneys clip pkt of 100 , sagital saw blades , oscillating saw blade , cautery tips monopolar , cautery tips bipolar , orbital floor plate basic middle-0.3mm profile , orbital floor mesh adult profile 0.14 m , dynamic mesh malleable no. 120x 0.4mm , titanium ezy mesh profile 0.4mm , titanium ezy mesh profile 0.6mm , titanium ezy mesh pre contomed right , titanium ezy mesh pre contomed left , skin stapler with 35 stainless steel staples , straight hand piece nsk internal spray type s-max m65 , ultrasonic scaler handpiece with 5x universal tips , tab chymoral forte , capsule antioxident , tab ketarolac tromethamine dispersible table , tab cefixime 200mg , tab pantaprazole and dsr , disposable dental examination mirror, disposable gown, disposable shoe cover for shoe cover dispensing machine pkt of 100, broach nerve canal barbed assorted size pkt of 12, fine and medium abrasive diamond/ aluminum oxide coated strips pkt of 10, composite finishing and polishing kit, dentin replacement material consisting of calcium silicate based powder and calcium chloride liquid (in box of 5 capsules and 5 liquid tubes), resorbable alloplastic graft calcium phosphosilicate with polyethylene glycol in putty consistency (novabone putty) 4x bio graft 0.25cc, chairside silicon material for relining /retentive kit pkt containing 100 gm pkt, cotton wool absorbent pkt of 50 gm, pro matrix band curved assorted yellow orange band with holder pkt of 10, pro matrix band 4.5 mm narrow band green with holder pkt of 10, electric tooth brush medium, liquid dam 4 syg, spirit bott of 1 ltr 97% alcohol, artificial saliva (mouth wet) bott containing 500ml, miracle mix bottle of 15gm powder should have bottle of 8-10 ml liquid, monopolar tips for cautery unit, bipolar tips for cautery unit, debonding kit for orthodonitcs, tungsten carbide orthodondic debonding bur straight fissure for airotor hand piece pkt of 05, tungsten carbide orthodontic debonding bur tapered fissure for airotor hand piece pkt of 05, tips for paracore pkt of 50, bur diamond 201 tapered fissure, hand disinfectant bott of 500ml, towel ot green, savlon solution bott of 500 ml, pedodontic tooth paste, sterile synthetic absorbable surgical suture vicryl 3-0 3/4 reverse cuttng, sterile synthetic absorbable surgical suture vicryl 3-0 3/4 cuttng, reneys clip pkt of 100, sagital saw blades, oscillating saw blade, cautery tips monopolar, cautery tips bipolar, orbital floor plate basic middle-0.3mm profile, orbital floor mesh adult profile 0.14 m, dynamic mesh malleable no. 120x 0.4mm, titanium ezy mesh profile 0.4mm, titanium ezy mesh profile 0.6mm, titanium ezy mesh pre contomed right, titanium ezy mesh pre contomed left, skin stapler with 35 stainless steel staples, straight hand piece nsk internal spray type s-max m65, ultrasonic scaler handpiece with 5x universal tips, tab chymoral forte, capsule antioxident, tab ketarolac tromethamine dispersible table, tab cefixime 200mg, tab pantaprazole and dsr, disposable dental examination mirror
Agency / Dept :
indian army
Due Date :
Sep 07, 2026 (4 days left)
Tender Value :
13.56L
View Documents
T18 Ref No : 16224430
Location : ernakulam , kerala
Source : GEM Tenders
tender for garnet abrasive 20/40 mesh (coarse)
Agency / Dept :
cochin shipyard limited CSL
Due Date :
Jul 23, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16380971
Location : nashik , maharashtra
Source : GEM Tenders
tender for garnet abrasive prime no. 80 mesh grit size: 80
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Aug 14, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16499899
Location : pune , maharashtra
Source : GEM Tenders
tender for industrial cotton waste , n95 nose mask , dust bin heavy duty 35 ltr , wet mop , dry mop , soft broom , hard broom , door mat 2 x 3 ft , baking soda , super absorbent cotton mop , wet and dry cotton mop , wet and dry cotton floor mop pad , hand wash , bucket , floor cleaning liquid dome , hose clip , teflon taper , single point diamond dresser , star grinding wheel dresser , abrasive stick grinding wheel dresser , nylon full hand gloves , industrial hand glove cotton , industrial polish paper , wax candle , round polishing belt , oil stone cuboids , sediment filter , pre carbon filter , double push connector , connecting tube , black board choke , industrial blue used to convey mandatory action , steel body air gun , pneumatic air circulation in pine , steel wire brush for file cleaning , painting brush , screw driver , belt for belt spanner high grade cotton mesh strap , oil filter adjustable wrench , rechargeable torch for rough dressing , battery aaa, aa , induction hot plate , heater 2 kw , 2 burner gas stove , copper strip fail , acrylic rod , vinegar , thermal water bottle , jar for liquid measurement , litmus paper for ph value measurement , shoe rack , bubble sheet roll , hss tap extractor set , hss screw extractor set , wd 40 spray , fevicol , velvet display cloth , pneumatic debarring machine , debarring tool set, cotton waste white superior quality free fromany synthetic impurities 100% cotton knot free, dust free, n95 nose mask., dust bin heavy duty 35 ltr as per iso 9001-2025 plastic, wet mop 24 inch, dry mop 24 inch, soft broom (length- min100 cm, handle- pvc-coated metal), hard broom (length- min120 cm, handle- rust-resistant stainless steel with a hanging loop), door mat 2 x 3 ft (anti-skid rubber or pvc backing, and moisture-trapping), baking soda (density-63 to 66 lb/ft cube (approx 1.0 to 1.05 g/cm cube), super absorbent 100% cotton yarn mop with telescopic handle length 4 to 5 ft., wet & dry cotton mop with telescopic handle (18 inch x 16inch x5cm), wet & dry cotton floor mop pad (18 inch x 16inch x5cm), hand wash (ph level 5.5 - 6.5), bucket 5 ltr (hdpe plastic material), floor cleaning liquid dome x 1 ltr., stainless steel hose clip 1/2 inch (hexagon screw head type), stainless steel hose clip 1/4 inch (hexagon screw head type), stainless steel hose clip 1 inch (hexagon screw head type), stainless steel hose clip 4 inch (hexagon screw head type), stainless steel hose clip 5 inch (hexagon screw head type), teflon tape 10 nos in 1 box (width- min 12 mm), single point diamond dresser 0.5 mm (dia 10mm), single point diamond dresser 1 mm (dia 10mm), star grinding wheel dresser with handle for rough dressing., abrasive stick grinding wheel dresser (25m x 25m x 10mm) standard., nylon full hand gloves 22 inch, industrial hand gloves cotton knitted, industrial polish paper 420 no (grit no-420), industrial polish paper 320 no (grit no-320), industrial polish paper 220 no (grit no-220), industrial polish paper 120 no (grit no-120), industrial polish paper 80 no (grit no-80), wax candle, round polishing belt-grit number-120,180 length 900mm, width 100mm.(10 nos of each grit), oil stone cuboids 10 x 10 x 120 mm (coarse grit-120 to 320, fine grit-800 to 3000)., oil stone cuboids dia 100 mm l-100 mm(coarse grit-120 to 320, fine grit-800 to 3000)., oil stone cuboids 150 x 50 x 25 mm (coarse grit-120 to 320, fine grit-800 to 3000)., sediment filter for uv water purifier (suitable for uv water purifier, product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), pre carbon filter for uv water purifier(suitable for uv water purifier , product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), 1/4 inch double push connector for uv water purifier (suitable for uv water purifier , product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), 1/4 inch connecting tube for uv water purifier.(suitable for uv water purifier , product code- gwpdhacuv00000 and name- ag absolute hot n ambient and cold uv eurka forbes ltd), black board chock., industrial blue used to convey mandatory action., steel body air gun(pnumatic air gun ss body), pneumatic air circulation in pipe id 8mm and od 12mm, pneumatic air circulation in pipe id 10mm and od 14mm, pneumatic air circulation in pipe id 12mm and od 16mm, steel wire brush for file cleaning (overall length in minimum 235, bristal trim length- min 15mm, head face-min 30mm, gauge- 0.15 to 0.20mm, hardend steel wire)., painting brush no. 02 (2 inch ), screw driver 15 inch, screw driver 18 inch, belt for belt spanner high grade cotton mesh strap (40mm width x 5mm thick)., oil filter adjustable wrench (0 to 200 mm), rechargeable torch 20w, 4000mah., battery aaa, aa., induction hot plate 2100 watt., heater 2 kw (immersion heater), 2 burner gas stove ( body thickness min 4mm ss material), copper strip foil (difference thicknesses- 0.05 mm to 0.10mm,0.15mm and 0.20mm (1.25 kg for each thickness)., acrylic rod (fully transparent) dia 50 mm., vinegar 1 ltr., thermal water bottle 1 ltr melton., 1/2 ltr jar for liquid measurement., litmus paper for ph value measurement., shoe rack 10 x 10 x 1 ft with metal., bubble sheet roll 40 gsm 1 mtr x 50 mtr., hss tap extractor set m2-m16., hss screw extractor set (2mm-12mm)., wd 40 spray 420 ml as per iso 9001., fevicol., velvet display cloth 300 gsm., pneumatic deburring m/c with grinding tool set (capacity should be 200w, rpm 22000, air pressure more than 120 psi)., deburring tool set diamond file(50 pieces diomand bur set and 10 pieces 160 length).
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Aug 18, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16669786
Location : gurdaspur , punjab
Source : GEM Tenders
tender for construction of asphalt base for outdoor volleyball court , 10 layer acrylic surface , led lighting installation , volleyball court accessories , chain link wire mesh , volleyball score board with stand , player sitting bench with shed , water roller, volleyball court, the preferred base surface for any outdoor synthetic court is asphalt dressing of soil after removing existing grass and weeds compaction of the sub base will be 8 10 ton roller carryout anti-termite and weed treatment on the total area by spraying. lay a layer of 85mm 65mm compacted water bound macadam in one two layers respectively wbm to be densely compacted by keying and inter locking the stones to ensure that no settlement takes place. lay a 30 mm compacted thick hot mix asphalt bm course. lay a 20 mm compacted thick hot mix a.c course. seal coat with stone dust. an open saucer drains at al lower end. 6 retaining or edge wall for support, one layer of acrylic resurface five layer layers of imported high class sports field granule cushion with preservative fluid. two layer layers of imported high class sports field powder cushion with preservative fluid. two layers of color coating.red greed blue specifications surface texture more texture with less abrasiveness. with international level of marking., in this system there will be 4 ms poles 20 ft high, placed on the sides. (i) 8 x 200 w led flood light fixtures on the four poles (2 on each pole). (ii) one doubled door weather proof distribution board with ms sheet. (iii) four poles with mcbs. (iv) full wiring from the control panel to poles and fixture complete., volleyball pole. heavy duty 3 inch, 4mm thickness with built in height adjustment & net wire tightening winch mechanism with the help of small key provided with the post all system as per international standard net nylon thick colour 4 sides tape 14 cm on top & 10 cm at bottom & both side nylon rope size 10 x 1 mtr. as per ruling (with carry bag). umpire chair cushioned water proof chair made of ms round 25 mm pipe structure stairs and provision of umpire for standing/ sitting height., 10 ft high chain link fence all around the court with three gates. frame made up of 2 ms square pipe wire 3mm with mesh size 4 x 4., type led color red amber digit size 6 captions team a b score set serving time power rating 210 to 240 vac cabinet all cabinets are finished with 22 24 gauze crc mild steel. powder coating to ensure minimal fading foe the life of score board. dimension 1000mm x 800mm x 60mm wxhxd operating. systems micro process control operation model full of with all keys on keyboard for direct entry of all information plus built in power on off control switches., bench for both teams with seating capacity of 10 players (two benches for each team with size 120x18x20) made up of ms pipes. shed for both teams of size 10 ft x 10 ft (dugout)., water roller for drying of ground.
Agency / Dept :
indian army
Due Date :
Aug 18, 2026
Tender Value :
15L
View Documents
T18 Ref No : 16834482
Location : gurdaspur , punjab
Source : GEM Tenders
tender for construction of asphalt base for outdoor volleyball court , 10 layer acrylic surface , led lighting installation , volleyball court accessories , chain link wire mesh , volleyball score board with stand , player sitting bench with shed , water roller, volleyball court, the preferred base surface for any outdoor synthetic court is asphalt dressing of soil after removing existing grass and weeds compaction of the sub base will be 8 10 ton roller carryout anti-termite and weed treatment on the total area by spraying. lay a layer of 85mm 65mm compacted water bound macadam in one two layers respectively wbm to be densely compacted by keying and inter locking the stones to ensure that no settlement takes place. lay a 30 mm compacted thick hot mix asphalt bm course. lay a 20 mm compacted thick hot mix a.c course. seal coat with stone dust. an open saucer drains at al lower end. 6 retaining or edge wall for support, one layer of acrylic resurface five layer layers of imported high class sports field granule cushion with preservative fluid. two layer layers of imported high class sports field powder cushion with preservative fluid. two layers of color coating.red greed blue specifications surface texture more texture with less abrasiveness. with international level of marking., in this system there will be 4 ms poles 20 ft high, placed on the sides. (i) 8 x 200 w led flood light fixtures on the four poles (2 on each pole). (ii) one doubled door weather proof distribution board with ms sheet. (iii) four poles with mcbs. (iv) full wiring from the control panel to poles and fixture complete., volleyball pole. heavy duty 3 inch, 4mm thickness with built in height adjustment & net wire tightening winch mechanism with the help of small key provided with the post all system as per international standard net nylon thick colour 4 sides tape 14 cm on top & 10 cm at bottom & both side nylon rope size 10 x 1 mtr. as per ruling (with carry bag). umpire chair cushioned water proof chair made of ms round 25 mm pipe structure stairs and provision of umpire for standing/ sitting height., 10 ft high chain link fence all around the court with three gates. frame made up of 2 ms square pipe wire 3mm with mesh size 4 x 4., type led color red amber digit size 6 captions team a b score set serving time power rating 210 to 240 vac cabinet all cabinets are finished with 22 24 gauze crc mild steel. powder coating to ensure minimal fading foe the life of score board. dimension 1000mm x 800mm x 60mm wxhxd operating. systems micro process control operation model full of with all keys on keyboard for direct entry of all information plus built in power on off control switches., bench for both teams with seating capacity of 10 players (two benches for each team with size 120x18x20) made up of ms pipes. shed for both teams of size 10 ft x 10 ft (dugout)., water roller for drying of ground.
Agency / Dept :
indian army
Due Date :
Aug 20, 2026
Tender Value :
15L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16143467
Location : thiruvananthapuram , kerala
Source : GEM Tenders
corrigendum tender for procurement of misc maint stores aluminium aldrop or sliding bolt 200mm , aluminium sliding door bolt 250mm , aluminium aldrop or sliding bolt 300mm , aluminium curtain rod 20 mm , aluminium curtain bracket fancy type 25 mm , cp curtain rod bracket 25 mm , u clamp for 20 mm dia gi pipe , u clamp for 25 mm dia gi pipe , ms triangular corner bracket 25 inch , aluminium hydraulic door closer 6 inch right , aluminium butt hinges 75 mm , mild steel halical door spring 300 mm , mildsteel piano type butt hinges 20 or30 mm x6 feet , cpvc ball valve half turn 25 mm , cpvc ball valve half turn 40 mm , upvc float valve 25 mm , cabinet mirror 450 x 350 mm , corner glass shelf , glass shelves for bath room , cp toilet paper holder , cp towel ring , cp soap dish tray , cp waste coupling 32 mm dia for kitchen sink , mortice lock 100 mm and key , cp over head shower 120 mm , ewc seat cover with hinges , pvc low level flushing system 10 ltrs cap , ss plate rack of size 36 inch x 45 inch x 10 inch , pvc squire shoe , pvc shoe for chair verandah , gi bend 50 mm , gi tee reducer 25 mm x 50 mm , gi pipe med grade isi marked 50 mm bore , ss wire mesh 0.36 mm dia , nylon washer , ms wire mesh 1200 mm wide , hack saw blade , upvc end cap 15 mm , upvc end cap 20 mm , upvc end cap 25 mm , upvc end cap 32 mm , cpvc elbow 15 mm , cpvc elbow 20 mm , cpvc union 25 mm , upvc union 20 mm , upvc union 25 mm , upvc elbow 15 mm , upvc elbow 20 mm , upvc elbow 25 mm , upvc elbow 32 mm , upvc elbow reducer 15mm x 20 mm , upvc elbow reducer 25mm x 20 mm , upvc socket 15 mm , upvc socket 20 mm , upvc socket 25 mm , upvc socket reducer 20mm x 15mm , upvc socket reducer 20mm x 25mm , upvc tee 15 mm , upvc tee 20 mm , upvc tee 25 mm , upvc tee reducer 25mm x 15mm , upvc fta adaptor 20 mm , cpvc mta adaptor 20 mm , upvc coupling 15 mm , upvc coupling 20 mm , upvc coupling 25 mm , upvc coupling 32 mm , cpvc tee 15 mm , cpvc tee 20 mm , cpvc tee reducer 25 mm x 20 mm , upvc bush reducer 15 mm x 20 mm , pvc pipe 20 mm , upvc pipe 15 mm , upvc pipe 25 mm , upvc pipe 20 mm , upvc pipe 40 mm , adhesive for upvc pipes , solvent cement 118 ml , soda ash , sodium hypochlorite , calcium hypochlorite granules , aluminium potassium sulphate , bleaching powder , glass pane 24 inch x 18 inch x 4 mm , looking mirror 600 x 400 mm , ptmt connection pipe 900 mm , pvc waste pipe 32 mm dia and 750 mm for wbh , cutting abrasive wheel for angle grinding , sand paper wheel 4 inch 60 nos , sand paper wheel 4 inch 100 nos , paint brush 75mm width , paint roller 100 mm , paint roller 75 mm , paint roller 25 mm , drill bit 2 mm , drill bit 3 mm , drill bit 4 mm , drill bit 5 mm , drill bit 6 mm , drill bit 8 mm , jumper bit 6 mm , jumper bit 8 mm , packing cloth 150 cm wide , taflon tape , ms panel pin or nails 25mm , ms panel pin or nails 20 mm , pvc gittior rawl plug , adhesive s h paste , adhesive s r paste , pvc seat for chair verandah , pvc moulded seat for chair dining , foam cushion 50 mm wide , foam cushion 40 mm wide for dining chair offr , foam cushion of size 22 inch x 21 inch x100 mm thick having 40 d , knob for drawer with screw , looking mirror 1220 x 380 x 5 mm for table dressing ladies , mirror for table dressing gents 1115 x 510 x 5.5 mm , gi concrete nails 75 mm , nail wire gi 20mm , nail wire gi 25mm , nail wire gi 40mm , nail wire gi 50mm , nail wire gi 60mm , nail wire gi 150mm , prelaminated particle board 8 feet x4 feet x18 mm , plywood bwr 8 feet x 4 feet x 4mm , plywood bwr 8 feet x 4 feet x 6mm , plywood bwr 8 feet x 4 feet x 9mm , plywood bwr 8 feet x 4 feet x 12 mm , plywood commercial 6 feet x 3 feet x12 mm , plywood commercial 8 feet x4 feet x 8 mm , mdf board 8 feet x 4 feet x 12 mm , mdf board 8 feet x 4 feet x 18 mm , ply ost 8 feet x 4 feet x 6 mm , gi elbow 32 mm 3 way , sand paper various grade , steel wood screw 15 mm x 6g , steel wood screw 35 mm x 6g , steel wood screw 35 mm x 7g , steel wood screw 45 mm x 8g , steel wood screw 50 mm x 8g , steel wood screw 75 mm x 8g , synthetic enamel paint olive green colour , synthetic enamel paint white colour , synthetic enamel paint grey colour , synthetic enamel paint smoge grey colour , synthetic enamel paint black colour , synthetic enamel dark brown colour , synthetic enamel paint red colour , paint aluminium , wood corner beading , wooden beading flat patti , wood glue , touch wood , m seal , thinner , turpentine oil , electronic step regulator for ceiling fan modular , led lamp 7 watt , led garden light 10 w , led garden light 20 w , led gate light 40 w , mccb 40 amps 4 pole 16 ka , insulation tape 20 mm x 25 mtr , modular socket 6 amps 3 pin , modular switch socket combination 6 or 16 a 3 pin , switch socket combination 5or6 amps 5 pin , swtich socket, aluminium aldrop or sliding bolt 200mm, aluminium sliding door bolt 250mm, aluminium aldrop or sliding bolt 300mm, aluminium curtain rod 20 mm, aluminium curtain bracket fancy type 25 mm, cp curtain rod bracket 25 mm, u clamp for 20 mm dia gi pipe, u clamp for 25 mm dia gi pipe, ms triangular corner bracket 25 inch, aluminium hydraulic door closer 6 inch right, aluminium butt hinges 75 mm, mild steel halical door spring 300 mm, mildsteel piano type butt hinges 20 or30 mm x6 feet, cpvc ball valve half turn 25 mm, cpvc ball valve half turn 40 mm, upvc float valve 25 mm, cabinet mirror 450 x 350 mm, corner glass shelf, glass shelves for bath room, cp toilet paper holder, cp towel ring, cp soap dish tray, cp waste coupling 32 mm dia for kitchen sink, mortice lock 100 mm and key, cp over head shower 120 mm, ewc seat cover with hinges, pvc low level flushing system 10 ltrs cap, ss plate rack of size 36 inch x 45 inch x 10 inch, pvc squire shoe, pvc shoe for chair verandah, gi bend 50 mm, gi tee reducer 25 mm x 50 mm, gi pipe med grade isi marked 50 mm bore, ss wire mesh 0.36 mm dia, nylon washer, ms wire mesh 1200 mm wide, hack saw blade, upvc end cap 15 mm, upvc end cap 20 mm, upvc end cap 25 mm, upvc end cap 32 mm, cpvc elbow 15 mm, cpvc elbow 20 mm, cpvc union 25 mm, upvc union 20 mm, upvc union 25 mm, upvc elbow 15 mm, upvc elbow 20 mm, upvc elbow 25 mm, upvc elbow 32 mm, upvc elbow reducer 15mm x 20 mm, upvc elbow reducer 25mm x 20 mm, upvc socket 15 mm, upvc socket 20 mm, upvc socket 25 mm, upvc socket reducer 20mm x 15mm, upvc socket reducer 20mm x 25mm, upvc tee 15 mm, upvc tee 20 mm, upvc tee 25 mm, upvc tee reducer 25mm x 15mm, upvc fta adaptor 20 mm, cpvc mta adaptor 20 mm, upvc coupling 15 mm, upvc coupling 20 mm, upvc coupling 25 mm, upvc coupling 32 mm, cpvc tee 15 mm, cpvc tee 20 mm, cpvc tee reducer 25 mm x 20 mm, upvc bush reducer 15 mm x 20 mm, pvc pipe 20 mm, upvc pipe 15 mm, upvc pipe 25 mm, upvc pipe 20 mm, upvc pipe 40 mm, adhesive for upvc pipes, solvent cement 118 ml, soda ash, sodium hypochlorite, calcium hypochlorite granules, aluminium potassium sulphate, bleaching powder, glass pane 24 inch x 18 inch x 4 mm, looking mirror 600 x 400 mm, ptmt connection pipe 900 mm, pvc waste pipe 32 mm dia and 750 mm for wbh, cutting abrasive wheel for angle grinding, sand paper wheel 4 inch 60 nos, sand paper wheel 4 inch 100 nos, paint brush 75mm width, paint roller 100 mm, paint roller 75 mm, paint roller 25 mm, drill bit 2 mm, drill bit 3 mm, drill bit 4 mm, drill bit 5 mm, drill bit 6 mm, drill bit 8 mm, jumper bit 6 mm, jumper bit 8 mm, packing cloth 150 cm wide, taflon tape, ms panel pin or nails 25mm, ms panel pin or nails 20 mm, pvc gittior rawl plug, adhesive s h paste, adhesive s r paste, pvc seat for chair verandah, pvc moulded seat for chair dining, foam cushion 50 mm wide, foam cushion 40 mm wide for dining chair offr, foam cushion of size 22 inch x 21 inch x100 mm thick having 40 d, knob for drawer with screw, looking mirror 1220 x 380 x 5 mm for table dressing ladies, mirror for table dressing gents 1115 x 510 x 5.5 mm, gi concrete nails 75 mm, nail wire gi 20mm, nail wire gi 25mm, nail wire gi 40mm, nail wire gi 50mm, nail wire gi 60mm, nail wire gi 150mm, prelaminated particle board 8 feet x4 feet x18 mm, plywood bwr 8 feet x 4 feet x 4mm, plywood bwr 8 feet x 4 feet x 6mm, plywood bwr 8 feet x 4 feet x 9mm, plywood bwr 8 feet x 4 feet x 12 mm, plywood commercial 6 feet x 3 feet x12 mm, plywood commercial 8 feet x4 feet x 8 mm, mdf board 8 feet x 4 feet x 12 mm, mdf board 8 feet x 4 feet x 18 mm, ply ost 8 feet x 4 feet x 6 mm, gi elbow 32 mm 3 way, sand paper various grade, steel wood screw 15 mm x 6g, steel wood screw 35 mm x 6g, steel wood screw 35 mm x 7g, steel wood screw 45 mm x 8g, steel wood screw 50 mm x 8g, steel wood screw 75 mm x 8g, synthetic enamel paint olive green colour, synthetic enamel paint white colour, synthetic enamel paint grey colour, synthetic enamel paint smoge grey colour, synthetic enamel paint black colour, synthetic enamel dark brown colour, synthetic enamel paint red colour, paint aluminium, wood corner beading, wooden beading flat patti, wood glue, touch wood, m seal, thinner, turpentine oil, electronic step regulator for ceiling fan modular, led lamp 7 watt, led garden light 10 w, led garden light 20 w, led gate light 40 w, mccb 40 amps 4 pole 16 ka, insulation tape 20 mm x 25 mtr, modular socket 6 amps 3 pin, modular switch socket combination 6 or 16 a 3 pin, switch socket combination 5or6 amps 5 pin, swtich socket combination 15 or 16 amps 5 or 6 pin, dol starter for pump set 9 to10 a 415 v, fully autometic star delta starter for 415 v 14 to 23 a for 20 hp pump set, fully autometic star delta starter for 415 v 9 to 15 a for 15 hp pump set
Agency / Dept :
indian army
Due Date :
Jul 09, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Abrasive Mesh. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Abrasive Mesh sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Abrasive Mesh Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Abrasive Mesh, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Abrasive Mesh Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Abrasive Mesh Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Abrasive Mesh.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Abrasive Mesh depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Abrasive Mesh Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Abrasive Mesh bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Abrasive Mesh. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Abrasive Mesh, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Abrasive Mesh, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Abrasive Mesh?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Abrasive Mesh tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Abrasive Mesh?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Abrasive Mesh, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Abrasive Mesh is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All